D-Link Router DIR-626L User Manual

							47
D-Link DIR-626L User Manual
Secti\bn 4 - Security
It  is  rec\bmmended  t\b  enable  encrypti\bn  \bn  y\bur  wireless  r\buter  bef\bre  y\bur  wireless  netw\brk  adapters.  Please  establish 
wireless  c\bnnecti\fity  bef\bre  enabling  encrypti\bn. Y\bur  wireless  signal  may  degrade  when  enabling  encrypti\bn  due  t\b  the 
added \b\ferhead.
1.  L\bg int\b the web-based c\bnfigurati\bn by \bpening a web br\bwser and 
entering the IP address \bf the r\buter (192.168.0.1). Click \bn. Setup.
and then click. Wire\bess.Settings \bn the left side.
2.  Next t\b Security Mode, select WPA-Enterprise.
3.  Next t\b  WPA Mode , select Auto, WPA2 .\fn\by , \br.WPA .\fn\by . Use Auto 
if y\bu ha\fe wireless clients using b\bth WPA and WPA2.
4.  Next t\b Cypher Type, select TKIP.and.AES, TKIP, \br AES.
5.  Next t\b  Group Key Update Inter\fal, enter the am\bunt \bf time bef\bre 
the  gr\bup  key  used  f\br  br\badcast  and  multicast  data  is  changed 
(3600 is default).
6.  Next t\b  Authentication Timeout, enter the am\bunt \bf time bef\bre a 
client is required t\b re-authenticate (60 minutes is default). 
7.  Next t\b  \bADIUS Ser\fer IP Address  enter the IP Address \bf y\bur RADIUS 
ser\fer.
\fonfigure WPA/WPA2-En\berprise (RADIUS)  
						

							48
D-Link DIR-626L User Manual
Secti\bn 4 - Security
8.  Next  t\b  \bADIUS  Ser\fer  Port,  enter  the  p\brt  y\bu  are  using  with 
y\bur RADIUS ser\fer. 1812 is the defau\llt p\brt.
9.  Next t\b \bADIUS Ser\fer Shared Secret, enter the security key.
10.  If the  MAC Address Authentication b\bx is selected then the user 
will need t\b c\bnnect fr\bm the same c\bmputer whene\fer l\bgging 
int\b the wireless netw\brk.
11.  Click  Advanced  t\b enter settings f\br a sec\bndary RADIUS Ser\fer.
12.  Click App\by.Settings t\b sa\fe y\bur settings.  
						

							49
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
This secti\bn will all\bw y\bu t\b change the l\bcal net\lw\brk settings \bf the r\buter and t\b c\bnfigure the DHCP settings\l.
Ne\bwork Se\b\bings
Enter the IP address \bf the r\buter. The default IP address 
is 192.168.0.1.
If y\bu change the IP address, \bnce y\bu click  Save.Settings , 
y\bu will need t\b enter the new IP address in y\bur br\bwser 
t\b get back int\b the c\bnfigurati\bn utility.
Enter  the  Subnet  Mask.  The  default  subnet  mask  is 
255.255.255.0.
Enter a name f\br the r\buter.
Enter the D\bmain name (Opti\bnal).
Uncheck the b\bx t\b transfer the DNS ser\fer inf\brmati\bn 
fr\bm  y\bur  ISP  t\b  y\bur  c\bmputers.  I f  checked,  y\bur 
c\bmputers will use the r\buter f\br a DNS ser\fer.
Rou\ber IP Address:
Subne\b Mask:
Device Name:
Local Domain:
Enable DNS Relay:
Rou\ber Se\b\bings  
						

							50
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
DH\fP Server Se\b\bings
DHCP stands f\br Dynamic H\bst C\bntr\bl Pr\bt\bc\bl. The DIR-626L has a built-in DHCP ser\fer. The DHCP Ser\fer will aut\bmatically 
assign an IP address t\b the c\bmputers \bn the LAN/pri\fate netw\brk. Be sure t\b set y\bur c\bmputers t\b be DHCP clients by setting 
their TCP/IP settings t\b “Obtain an IP Address Aut\bmatically.” When y\bu turn y\bur c\bmputers \bn, they will aut\bmatically l\bad 
the pr\bper TCP/IP settings pr\b\fided by the DIR-626L. The DHCP Ser\fer will aut\bmatically all\bcate an unused IP address fr\bm 
the IP address p\b\bl t\b the requesting c\bmputer. Y\bu must specify the \lstarting and ending add\lress \bf the IP address p\b\bl.
Check  this  b\bx  t\b  enable  the  DHCP  ser\fer  \bn  y\bur  r\buter. 
Uncheck t\b disable this functi\bn.
Enter the starting and ending IP addresses f\br the DHCP ser\fer’s 
IP assignment.
Note:  If  you  statically  (manually)  assign  IP  addresses  to  your 
computers  or  de\fices,  make  sure  the  IP  addresses  are  outside  of 
this range or you may ha\fe an IP conflict. 
The length \bf time f\br the IP address lease. Enter the Lease time 
in minutes.
Enable this feature t\b br\badcast y\bur netw\brks DHCP ser\fer t\b 
LAN/WLAN clients.
NetBIOS all\bws LAN h\bsts t\b disc\b\fer all \bther c\bmputers within 
the  netw\brk,  enable  this  feature  t\b  all\bw  the  DHCP  Ser\fer  t\b 
\bffer NetBIOS c\bnfigurati\bn settings.
Enable this feature t\b all\bw WINS inf\brmati\bn t\b be learned fr\bm the WAN side, disable t\b all\bw manual c\bnfigurati\bn.
This feature all\bws the c\bnfigurati\bn \bf a NetBIOS ‘d\bmain’ name under which netw\brk h\bsts \bperates. This setting has n\b effect if 
the ‘Learn NetBIOS inf\brmati\bn fr\bm WAN’ is acti\fated.
Enable DH\fP 
Server:
DH\fP IP Address  Range:
DH\fP Lease Time: Always 
Broadcas\b:
Ne\bBIOS 
Announcemen\b:
Learn Ne\bBIOS  from WAN:
Ne\bBIOS Scope:  
						

							51
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Ne\bBIOS Node: WINS IP 
Address: Select the different type \bf NetBIOS n\bde;\l Broadcast.on\by, Point-to-Point, Mixed-mode, and Hybrid.
Enter y\bur WINS Ser\fer IP address(es).  
						

							52
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
DH\fP Reserva\bion
If y\bu want a c\bmputer \br de\fice t\b always ha\fe the same IP address assigned, y\bu can create a DHCP reser\fati\bn. The r\buter will assign the IP 
address \bnly t\b that c\bmputer \br de\fice. 
Note: This IP address must be within the DHCP I\ffP Address \bange.
Check this b\bx t\b enable the reser\fati\bn.
Enter the c\bmputer name \br select fr\bm the dr\bp-d\bwn 
menu and click  
						

							53
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
S\borage
This page will all\bw y\bu t\b access files fr\bm a USB external hard dri\fe \br thumb dri\fe that is plugged int\b the r\buter fr\bm y\bur 
l\bcal netw\brk \br fr\bm the Internet using either a web br\bwser \br an app f\br y\bur smartph\bne \br tablet. Y\bu can create users 
t\b be all\bwed t\b access these files.
Check t\b enable sharing files \bn y\bur USB st\brage de\fice that is 
plugged in y\bur r\buter.
Check  t\b  enable  HTTP  access  t\b  y\bur  r\buter’s  st\brage.  Y\bu  will 
ha\fe t\b type HTTP in the URL.
Enter  a  p\brt  (8181  is  default).  Y\bu  will  ha\fe  t\b  enter  this  p\brt 
in  the  URL  when  c\bnnecting  t\b  the  shared  files.  F\br  example: 
(http://192.168.0.1:818\u1).
Check t\b enable HTTPS (secure) access t\b y\bur r\buter’s st\brage. 
Y\bu will ha\fe t\b type HTTPS in the URL.
Enter  a  p\brt  (4433  is  default).  Y\bu  will  ha\fe  t\b  enter  this  p\brt 
in  the  URL  when  c\bnnecting  t\b  the  shared  files.  F\br  example: 
(https://192.168.0.1:44\u33).
T\b create a new user, enter a user name.
Enter a passw\brd f\br this acc\bunt.
Re-enter the passw\brd. Click Add/Edit t\b create the user.
Displays the acc\bunts. The Admin and Guest acc\bunts are built-in 
t\b the r\buter.
Displays the USB de\fice plugged int\b the r\buter.
Enable Web File 
Access:
Enable HTTP 
S\borage Remo\be  Access:
Remo\be Access  Por\b:
Enable HTTPS 
S\borage Remo\be  Access:
Remo\be HTTPS  Por\b:
User Name: Password:
Verify Password: User Lis\b:
Number of  Devices:  
						

							54
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Access Files from \bhe In\berne\b
If y\bu w\buld like t\b access y\bur files that are \bn y\bur USB thumb dri\fe \br external hard dri\fe that is c\bnnected t\b y\bur r\buter, f\bll\bw the steps bel\bw:
Step.1.-.Enab\be. Web.Fi\be.Access
Check the Enable Web File Access checkb\bx t\b enable. Then select 
if y\bu want t\b use HTTP \br HTTPS (secure) and enter the p\brt(s) y\bu 
want t\b use. The default f\br HTTP is 8181 and HTTPS is 4433.
Step.2.-.Create.a.User.Account
Under  User Creation , enter a username and passw\brd, and then click 
Add/Edit. 
Step.3.-.Configure.your.Access.Path
Under  User List, click the  Modify ic\bn f\br the user y\bu just created. 
Here y\bu can br\bwse t\b the f\blder \bn y\bur USB st\brage de\fice y\bu 
want t\b assign the Access Path t\b. 
Step.4.-.Save.Settings.
If y\bu want t\b add m\bre users, repeat steps 3 and 4. Once y\bu are 
finished,  click  the  Save.Settings   butt\bn  at  the  t\bp  t\b  sa\fe  y\bur 
settings. 
N\bte that under the HTTP St\brage Link (at the b\btt\bm) will display 
the URL(s) y\bu can use t\b c\bnnect. Als\b if y\bu selected HTTPS, y\bu 
must type in  HTTPS:// instead \bf  HTTP:// t\b get a secure c\bnnecti\bn. 
F\br  example,  if  y\bu  selected  HT TPS  and  changed  the  p\br t  t\b 
3200,  and  y\bur  WAN  IP  address  is  1.2.3.4,  then  y\bu  w\buld  enter 
HTTPS://1.2.3.4:3200 t\b c\bnnect.  
						

							55
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Media Server
This feature all\bws y\bu t\b share music, pictures and \fide\bs with a\lny de\fices c\bnnected t\b y\bur netw\brk. 
Check this b\bx t\b enable the media s\ler\fer feature.
Enter the media ser\fer’s name. 
Click  Save  t\b  sa\fe  y\bur  entry.  Y\bu  must  click  Save.
Settings at the t\bp t\b acti\fate y\bur reser\fati\bns. 
Enable Media 
Server:
\fompu\ber  Name:  
						

							56
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6
On this page, the user can c\bnfigure the IP\f6 C\bnnecti\bn type. There are tw\b ways t\b set up the IP\f6 Internet c\bnnecti\bn. Y\bu 
can use the Web-based IP\f6 Internet C\bnnecti\bn Setup Wizard, \br y\bu can manually c\bnfigure the c\bnnecti\bn.
F\br  the  beginner  user  that  has  n\bt  c\bnfigured  a  r\buter  bef\bre,  click  \bn 
the  IPv6. Internet. Connection. Setup.Wizard. butt\bn and the r\buter will 
guide y\bu thr\bugh a few simple steps t\b get y\bur netw\brk up and running.
F\br  the  ad\fanced  user  that  has  c\bnfigured  a  r\buter  bef\bre,  click  \bn  the 
Manua\b .IPv6 .Internet .Connection .Setup  butt\bn t\b input all the settings 
manually.
T\b c\bnfigure the IP\f6 l\bcal settings, click \bn the  IPv6.Loca\b. Connectivity.
Setup butt\bn.