Epson Aculaser CX28DN User Manual
Have a look at the manual Epson Aculaser CX28DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Making Advanced Copies 149 Duplex (Double-Sided) Document Copying A duplex (double-sided) document can be scanned and printed as either a duplex (double-sided) copy or a simplex (single-sided) copy. Duplex (double-sided) document copying can only be performed from the ADF. 1In the main screen (Copy mode), press the + or , key to select the cur- rent simplex/duplex (single-sided/double-sided) setting, and then press the Select key. 2Press the + or , key to select 2-SIDE→2-SIDE for a duplex (dou- ble-sided) copy or 2-SIDE→1-SIDE for a simplex (single-sided) copy, and then press the Select key. 3Press the + or , key to select LONG EDGE or SHORT EDGE as the binding position in the document to be scanned, and then press the Select key. 4If 2-SIDE→2-SIDE was selected in step 2, select LONG EDGE or SHORT EDGE as the binding position of the duplex (double-sided) copy, and then press the Select key. Setting Collated (Sort) Copying With collated (Sort) copying, multiple copies of multi-page documents can be printed in order and sorted by copy set. Collated (Sort) Copying From the ADF 1In the main screen (Copy mode), press the + or , key to select the cur- rent Sort setting, and then press the Select key. 2Press the + or , key to select SORT, and then press the Select key. The main screen (Copy mode) appears again. Collated (Sort) Copying From the Original Glass 1Position the document on the original glass. For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 119. 2In the main screen (Copy mode), press the + or , key to select the cur- rent Sort setting, and then press the Select key. 3Press the + or , key to select SORT, and then press the Select key.
Making Advanced Copies 150 4To print color copies, press the Start-Color key. To print monochrome copies, press the Start-B&W key. 5When NEXT PAGE? appears in the message window, place the second document page on the original glass, and then press the Select key. 6Repeat step 5 until all document pages have been scanned. 7After all document pages have been scanned, specify the desired number of copies using the keypad, and then press the Start-Color key or the Start-B&W key to begin printing.
Scanning From a Computer Application 152 Scanning From a Computer Application Documents can be scanned from a computer connected to this machine with a USB cable or via a network. Scanning settings can be specified and the scanning operation can be performed from TWAIN- or WIA-compatible appli- cations. From the scanner driver, a preview can be displayed and various adjustments, such as the size of the scan area, can be specified. For details on the installation of the scanner driver or network TWAIN settings, refer to the Setup Guide on the software CD-ROM. Basic Scanning Operation 1Position the document to be scanned. For details on positioning the document, refer to “Placing a document on the original glass” on page 119 and “Loading a document into the ADF” on page 120. 2Start the application to be used for scanning. 3Start the scanner driver according to the application settings. 4Specify the necessary scanner driver settings. 5Click the Scan button in the scanner driver.
Scanning From a Computer Application 153 Windows TWAIN Driver Settings „Load Specify a saved settings file (dat file) for scanning. „Save Save the current settings as a settings file (dat file). „Default Return all settings to their defaults. „Help icon Click to display the Help. „About icon Click to display the software version information. „ADF With scanning documents from the ADF, select whether to scan only the front side or both sides of the document. „Original Size Specify the original size. „Scan Type Specify the scan type. „Resolution Specify the resolution. „Scale Specify the enlargement or reduction ratio for the selected area. If the resolution is set at 1200 × 1200dpi or higher, a setting larger than 100% cannot be specified. „Scanning mode Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be specified, for example, for Brightness/Contrast and Filter. The parameters that can be set differ depending on the scanning mode that is selected. If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan is performed so that a preview image can be checked.
Scanning From a Computer Application 154 „Image size Shows the data size of the scan image. „Rotation Select the orientation of the image to be scanned. If the Rotate back side check box is selected, the back side of the image is rotated 180° and scanned. (Applies only if ADF (Duplex) is selected) „Close Click to close the TWAIN driver window. „Prescan Click to begin scanning a preview image. „Scan Click to begin scanning. „AutoCrop icon Click to automatically detect the scanning position based on the preview image. „Zoom icon Click to rescan the area selected in the preview window and enlarge it to fit the window. „Mirror icon Click to display a mirror image of the preview image. „Tone Reversal icon Click to reverse the colors of the preview image. „Clear icon Click to erase the preview image. „Preview window Displays a preview image. Drag the rectangle over the image to select an area. „Before/After (RGB) Move the pointer in the preview window to display the color tones at the pointers position before and after adjustments. „Width/Height Displays the width and height for the selected area in the selected measure- ment units.
Scanning From a Computer Application 155 Windows WIA Driver Settings „Paper source Select the paper source. „Color picture Select this setting when scanning in color. „Grayscale picture Select this setting when scanning in grayscale. „Black and white picture or text Select this setting when scanning in black and white. „Custom Settings Select this setting when scanning with Adjust the quality of the scanned picture settings applied. If settings have been specified with Adjust the quality of the scanned picture, Custom Settings is automatically selected. „Adjust the quality of the scanned picture Click this message to display the Advanced Properties dialog box. In the Advanced Properties dialog box, settings can be specified for Brightness, Contrast, Resolution, and Picture type (select from color, grayscale or black and white). These settings are applied when Custom Settings is selected. „Page size Specify the paper size when Page source is set to Document Feeder. „Preview window Displays a preview image. Drag the rectangle over the image to select an area. „Preview Click to begin scanning a preview image. „Scan Click to begin scanning. „Cancel Click to close the WIA driver window.
Scanning From a Computer Application 156 Macintosh TWAIN Driver Settings „Load Specify a saved settings file (dat file) for scanning. „Save Save the current settings as a settings file (dat file). „Default Return all settings to their defaults. „Help icon Click to display the Help. „About icon Click to display the software version information. „ADF With scanning documents from the ADF, select whether to scan only the front side or both sides of the document. „Original Size Specify the original size. „Scan Type Specify the scan type. „Resolution Specify the resolution. „Scale Specify the enlargement or reduction ratio for the selected area. If the resolution is set at 1200 × 1200dpi or higher, a setting larger than 100% cannot be specified. „Scanning mode Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be specified, for example, for Brightness/Contrast and Filter. The parameters that can be set differ depending on the scanning mode that is selected. If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan is performed so that a preview image can be checked.
Scanning From a Computer Application 157 „Image size Shows the data size of the scan image. „Rotation Select the orientation of the image to be scanned. If the Rotate back side check box is selected, the back side of the image is rotated 180° and scanned. (Applies only if ADF (Duplex) is selected) „Close Click to close the TWAIN driver window. „Prescan Click to begin scanning a preview image. „Scan Click to begin scanning. „AutoCrop icon Click to automatically detect the scanning position based on the preview image. „Zoom icon Click to rescan the area selected in the preview window and enlarge it to fit the window. „Mirror icon Click to display a mirror image of the preview image. „Tone Reversal icon Click to reverse the colors of the preview image. „Clear icon Click to erase the preview image. „Preview window Displays a preview image. Drag the rectangle over the image to select an area. „Before/After (RGB) Move the pointer in the preview window to display the color tones at the pointers position before and after adjustments. „Width/Height Displays the width and height for the selected area in the selected measure- ment units.
Scanning With the Machine 158 Scanning With the Machine The machine keys can be used to make scans. This operation differs from scanning from a computer application since the destination of the scan data can also be specified. Before scanning, check that the Scan key is lit up in green. If the key is not lit up in green, press the Scan key to enter Scan mode. If, while specifying settings, no key is pressed for the length of time specified for AUTO PANEL RESET, the entered settings are can- celed and the main screen (Scan mode) is displayed. Basic Scanning Operation 1Position the document to be scanned. For details on positioning the document, refer to “Placing a document on the original glass” on page 119 and “Loading a document into the ADF” on page 120. 2Press the Scan key to enter Scan mode.