Epson Aculaser CX28DN User Manual

							Clearing Media Misfeeds 219
2Carefully pull out the misfed 
media.
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
 
						

							Clearing Media Misfeeds 220
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
3Close the right door.
 
						

							Clearing Media Misfeeds 221
Clearing a Media Misfeed in Tray 2
1Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
2Carefully pull out the misfed 
media.
 
						

							Clearing Media Misfeeds 222
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
 
						

							Clearing Media Misfeeds 223
3Close the right door.
4Pull out Tray 2, and then remove 
all media from the tray. 
5Fan the media you removed and 
then align it well.
 
						

							Clearing Media Misfeeds 224
6Load the media face up in Tray 2.
Make sure that the media is flat.
Do not load paper above the  mark. 
Slide the media guides against the edges of the media.
7Close Tray 2.
Clearing a Media Misfeed in Tray 3
1Open the right side cover of 
Tray 3.
Before opening the right 
side cover of Tray 3, fold 
up Tray 1.
 
						

							Clearing Media Misfeeds 225
2Carefully pull out the misfed 
media.
3Close the right side cover of 
Tray 3.
4Pull out Tray 3, and then remove 
all paper from the tray.
 
						

							Clearing Media Misfeeds 226
5Fan the paper you removed and 
then align it well.
6Load the paper face up in Tray 3.
Make sure that the paper is flat.
Do not load paper above the  mark.
Slide the media guides against the edges of the paper.
7Close Tray 3.
 
						

							Clearing Media Misfeeds 227
Clearing a Media Misfeed from the ADF
1Open the ADF feed cover.
2Remove the document from the 
ADF document feed tray.
3Lift to open the ADF cover.
 
						

							Clearing Media Misfeeds 228
4Remove any misfed media.
If the edge of the white leading sheet in the ADF comes out, insert 
it as it was before.
5Close the ADF cover.
6Close the ADF feed cover.