JVC Gz Ex310bu User Manual

							oSetting the camera to the pan cradle.
0 For how to connect the pan cradle and the camera, refer to the instruction
manual of the pan cradle for further details.1 Set the camera to the pan cradle.
.
0For how to connect the pan cradle and the camera, refer to the
instruction manual of the pan cradle for further details.
2 Set the power of the pan cradle to “ON”.
.
3Wait until the pan cradle stops the rotation.
.
0When the power is turned ON, pan cradle moves to the left/right to
adjust the position.
o Operations from the smartphone application
0 Connect the camera and the smartphone via DIRECT MONITORING or
INDOOR MONITORING/OUTDOOR MONITORING.
“Image Monitoring via Direct Connection (DIRECT MONITORING)” ( A  p. 132)
“Image Monitoring via an Access Point at Home (INDOOR MONITORING)”
( A  p. 135)
“Image Monitoring via the Internet (OUTDOOR MONITORING)”
( A  p. 140)1
Start “Everio sync. 2”.
.
0Start the application after confirming that the smartphone is
connected to this camera.
2 Tap the connection method.
.
3Tap  00260027  to perform the panning operation.
Using Wi-Fi (GZ-EX355/GZ-EX310)151 
						

							.
Memo : 
0Speed of the panning operation can be set in two steps.
“Changing the Panning Speed” ( A p. 173)Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on
the camera and smartphone (or computer).
0 Registering the access points to connect (wireless LAN router)
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
0 Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 157)
0 Setting the account on this camera
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)”
( A  p. 158)
0 Setting the sender’s e-mail address
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
0 Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)Using Wi-Fi (GZ-EX355/GZ-EX310)152 
						

							Menu SettingsSettingDetailsDIRECT MONITORINGConfigures various settings related to DIRECT MONITORING.
0 PASSWORD
Sets the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 155)
0 ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・ OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・ ON: It is recommended to set this usually.
“Setting the Enforced Group Owner (DIRECT MONITORING)” ( A p. 156)
0 HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 156)INDOOR MONITORINGConfigures various settings related to INDOOR MONITORING.
0 PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)” ( A  p. 155)
0 HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 156)OUTDOOR MONITORINGConfigures various settings related to OUTDOOR MONITORING.
0 PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 155)
0 UPnP (Default: “ON”)
Sets the UPnP of the camera.
・ OFF: Disables UPnP.
・ ON: Enables UPnP.
“Setting the UPnP of this Camera (OUTDOOR MONITORING)” ( A p. 157)
0 DDNS SETTING
Configures various settings related to DDNS.
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)” ( A p. 158)
0 HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 156)DETECT/MAILConfigures various settings related to notification mails.
0 DETECT/ MAIL ATTN.
Selects the recipient’s e-mail address for Detect/Mail.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” ( A p. 142)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)
0 DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・ MOTION DETECTION: Starts recording upon detection of subject’s movements.
・ FACE DETECTION: Starts recording upon detection of human faces.
“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” ( A p. 163)
0 DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.
“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” ( A p. 163)
0 SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
・ OFF: Does not record videos on this camera.
・ ON: Records videos on this camera.
“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” ( A p. 164)VIDEO MAIL0
VIDEO MAIL ADDRESSUsing Wi-Fi (GZ-EX355/GZ-EX310)153 
						

							Selects the recipient’s e-mail address for video mails.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” ( A p. 142)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)TV MONITORING0
MAC ADDRESS FILTER (Default: “OFF”)
By setting to “ON”, Everio can be searched from the device (TV monitor); the MAC address of the device needs to be registered to Everio in advance.
・ OFF: Disables UPnP.
・ ON: Enables UPnP.
“Enabling the MAC Address Filter (TV MONITORING)” ( A p. 170)
0 MAC ADDRESS LIST
MAC address of the TV monitor can be registered to the camera.
“Registering the MAC Address (TV MONITORING)” ( A p. 171)COMMON Wi-Fi SETTINGConfigures various settings related to the network.
0 ACCESS POINTS
Adds, deletes, or perform LAN settings of access points (wireless LAN router).
“Registering the Access Points of the Camera to Connect (ACCESS POINTS)” ( A p. 164)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)
0 MAC ADDRESS (Media Access Control address)
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
“Checking the MAC Address of this Camera” ( A p. 171)
0 SET FROM QR CODE
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in
Detailed User Guide.
“Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)” ( A p. 198)
0 LOCK SETTINGS
Sets a password to prevent others from seeing the network settings.
“Protecting the Network Settings with a Password” ( A p. 172)
0 INITIALIZATION
Returns the network settings to their default values.
“Initializing the Wi-Fi Settings” ( A p. 173)Using Wi-Fi (GZ-EX355/GZ-EX310)154 
						

							Setting the Password (DIRECT MONITORING/INDOORMONITORING/OUTDOOR MONITORING)
Sets the password required to access the camera.
0 Up to 8 characters (alphabets, numbers and symbols only), case-
sensitive.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “INDOOR MONITORING” ( 0011) or “OUTDOOR MONITORING”
( 000F ).
(Operation on this camera)
.
4Tap “PASSWORD”.
(Operation on this camera)
.
5Register a password.
(Operation on this camera)
.
0By default, the password is set to “0000”. (INDOOR MONITORING/
OUTDOOR MONITORING)
0 Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
6 Tap “SET”.
(Operation on this camera)
0 Settings will not be saved until “SET” is tapped.
Changing the HTTP Port
(DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)
Changes the port number to access to the camera.
Valid when setting up multiple cameras for Outdoor Monitoring.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DIRECT MONITORING”/“INDOOR MONITORING”/“OUTDOOR
MONITORING”.
(Operation on this camera)
4 Tap “HTTP PORT”.
(Operation on this camera)
5 Enter a port number.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)155 
						

							Setting the Enforced Group Owner (DIRECT MONITORING)
Sets whether to enforce authorization of the group owner.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “ENFORCED GROUP OWNER”.
(Operation on this camera)
.
5Tap “ON” or “OFF”.
.
0It is recommended to select “ON” usually.
If connection to devices that support Wi-Fi Direct fails, set to “OFF”.
Memo : 
0 When set to “OFF”, connection to devices that do not support Wi-Fi Direct
will be disabled.
Changing the HTTP Port (DIRECT MONITORING/INDOOR
MONITORING/OUTDOOR MONITORING)
Changes the port number to access to the camera.
Valid when setting up multiple cameras for Outdoor Monitoring.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DIRECT MONITORING”/“INDOOR MONITORING”/“OUTDOOR
MONITORING”.
(Operation on this camera)
4 Tap “HTTP PORT”.
(Operation on this camera)
5 Enter a port number.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)156 
						

							Setting the UPnP of this Camera (OUTDOOR MONITORING)
Sets the UPnP of the camera.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( 000F).
(Operation on this camera)
.
4Tap “UPnP”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to enable UPnP.
0 Select “OFF” to disable UPnP.
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
internet.
0 Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1 Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/ Set your e-mail address as the username.
2 Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3 Set the username and password used in registration on the camera.
(Operation on this camera)
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)”
( A  p. 158)
4 Execute OUTDOOR MONITORING.
(Operation on this camera)
If “OUTDOOR MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5 Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
“Image Monitoring via the Internet (OUTDOOR MONITORING)”
( A  p. 140)
Caution : 
0
Registration will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0 Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0 Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Using Wi-Fi (GZ-EX355/GZ-EX310)157 
						

							Setting Dynamic DNS on this Camera (OUTDOOR
MONITORING)
Sets the dynamic DNS information of the obtained account on the camera.
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 157)
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( 000F).
(Operation on this camera)
.
4Tap “DDNS SETTING”.
(Operation on this camera)
.
5Tap “DDNS”, then tap “ON”.
(Operation on this camera)
6 Enter the DDNS settings (username/password).
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026
 or  0027
 to move one space to the left or right.
0 After setting, tap “SET”.
Memo : 
0
Only the JVC dynamic DNS service can be set on this camera.Using Wi-Fi (GZ-EX355/GZ-EX310)158 
						

							Setting the Sender’s E-mail Address of the Camera
Sets the address to be used for sending e-mails on the camera.
Memo : 
0By using Gmail as the sender’s mail address, some of the settings can be
omitted.
Use of Gmail is recommended for users who have a Gmail account.1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “MAIL SETTING”.
(Operation on this camera)
.
6Tap “SENDER'S EMAIL”.
(Operation on this camera)
.
7Tap “NEXT”.
(Operation on this camera)
.
0Tap “CHANGE” to change the contents that are already set.
0 Enter the e-mail address and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
8 Tap “NEXT”.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Tap “CHANGE” to change the contents that are already set.
0 Enter the SMTP server and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
Using Wi-Fi (GZ-EX355/GZ-EX310)159 
						

							0Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
9 Tap “CHANGE” to change the SMTP port.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Change the SMTP port number (if necessary) and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
10 Tap “CHANGE” to change the authentication.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Tap the desired “AUTHENTICATE METHOD”.
.
11Tap “NEXT”.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0 Tap “CHANGE” to change the contents that are already set.
0
Enter the username and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026
 or  0027
 to move one space to the left or right.
0 After setting, tap “SET”.
12 Tap “NEXT”.
(Operation on this camera)
.
0The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0 Tap “CHANGE” to change the contents that are already set.
0 Enter the password and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
13 Tap “QUIT” or “SEND TEST EMAIL”.
(Operation on this camera)
.
SENDER'S EMAILEnter the sender’s e-mail address.SMTP SERVEREnter the SMTP server address.SMTP PORTSet this when the SMTP port number needs to be
changed.Using Wi-Fi (GZ-EX355/GZ-EX310)160