JVC Gz Ex310bu User Manual

							.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8 Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)221 
						

							.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other methods, such as “Manual Registration” and “WPS PIN
Registration” are also available. Refer to the following link for details.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
o Regular Operation
Connect the TV to the access point.
0 Connect the DLNA compatible TV to the access point (this function is
available for a connection via cables as well)
0 For details on connecting your TV to a Wi-Fi network, please refer to the
instruction manual of the TV in use.
Connecting This Camera to the TV
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “TV MONITORING” ( 000D).
(Operation on this camera)
.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)222 
						

							4Tap “START” ( 000C).
(Operation on this camera)
.
5Start making a connection.
(Operation on this camera)
.
6Connection in progress
.
7After the connection is completed, wait for the DLNA device to start up.
(Operation on this camera)
.
0If a considerable number of videos/still images are recorded in the
camera, it may take some time to start.
8 Images appear on the monitor of the DLNA device
(Operation on DLNA device)
.
0From the following instructions, perform operations on the DLNA
device.
For details on using the TV, refer to the instruction manual of the TV
in use.
Memo : 
0 If no image is displayed during TV monitoring, tap “STOP” to start from
step 1.
0 If the DLNA compatible TV in use cannot detect Everio, tap “STOP” to start
from the step 1 again.Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)223 
						

							Operating the Menu
There are two types of menus in this unit. 0 TOP MENU: Menu that contains all the items specific to the video
recording, still image recording, video playback, and still image playback modes respectively.
0 SHORTCUT MENU: Menu that contains the recommended functions for
video/still image recording.Operating the Top Menu
You can configure various settings using the menu.
0 The following is a screen of the model with Wi-Fi functions.
1
Tap “MENU”.
0 The top menu appears.
0 The menu differs according to the mode in use.
.
2Tap the desired menu.
.
3Tap the desired setting.
.
Memo : 
0To display the previous/next menu
Tap  001C or  001D.
0 To exit the screen
Tap  L (quit).
0 To display the help file
Tap  002A (help) and tap the item.
Help file may not be available for some items.Settings Menu224 
						

							Operating the Shortcut Menu
.You can configure various settings of the recommended functions in the
video/still image recording mode using the shortcut menu.
0 The following is a screen of the model with Wi-Fi functions.
1
Tap “MENU”.
.
2Tap the shortcut icon ( 0008).
.
0 The shortcut menu appears.
3 Tap the desired menu and setting.

.
0Allows settings of “EASY STORAGE”, “ANIMATION EFFECT”,
“DECORATE FACE EFFECT”, “SMILE SHOT”, “SMILE%/NAME
DISPLAY” and “BACKLIGHT COMP. (manual mode only) ”.

.
0Allows settings of “EASY STORAGE”, “SMILE SHOT”, “SMILE%/
NAME DISPLAY” and “BACKLIGHT COMP. (manual mode only) ”.
Memo : 
0 To return to the top menu
Tap  0029 (return).
0 To exit the screen
Tap  L (quit).
0 To display the help file
Tap  002A (help) and tap the item.Settings Menu225 
						

							RECORD SETTING Menu (video)
.
SCENE SELECT
Settings to suit the shooting condition can be selected.
“Shooting According to Scene (Subject)” ( A p. 32)
*Displayed only in the manual recording mode.
FOCUS
Focus can be adjusted manually.
“Adjusting Focus Manually” ( A p. 33)
*Displayed only in the manual recording mode.
BRIGHTNESS ADJUST
Adjusts the overall brightness of the screen.
“Adjusting Brightness” ( A p. 34)
*Displayed only in the manual recording mode.
BACKLIGHT COMP.
Corrects the image when the subject appears dark due to backlight.
“Setting Backlight Compensation” ( A p. 35)
*Displayed only in the manual recording mode.
WHITE BALANCE
Adjusts the color according to the light source.“Setting White Balance” ( A p. 36)
*Displayed only in the manual recording mode.
TELE MACRO
Enables close-up shots when using the telephoto (T) end of the zoom.
“Taking Close-up Shots” ( A p. 37)
*Displayed only in the manual recording mode.
TOUCH PRIORITY AE/AF
Automatically adjusts focus and brightness based on the subjects’ faces or selected area.“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” ( A p. 44)
LIGHT (GZ-EX355)
Turns on/off the light.
SettingDetailsOFFDoes not light up.AUTOLights up automatically when the surrounding is dark.ONLights up at all times.
GAIN UP
Makes the subject appear bright automatically when recording in dark places.
SettingDetailsOFFDeactivates the function.ONElectrically brightens the scene when it is dark.AUTO SLOW-SHUTTERSlows down the shutter speed to brighten the scene when it is dark.Memo : 
0 Although “AUTO SLOW-SHUTTER” brightens the scene more than “ON”, movements of the subject may become unnatural.Settings Menu226 
						

							WIND CUT
Reduces the noise caused by wind.
SettingDetailsOFFDeactivates the function.ONActivates the function.AUTOActivate the function automatically.
SHUTTER MODE
Continuous shooting settings can be adjusted.
SettingDetailsRECORD ONE SHOTRecords one still image.CONTINUOUS SHOOTINGRecords still images continuously while the SNAPSHOT button is pressed.Memo : 
0“LOW SPEED” is set in the video mode.
0 The size of the still image that is captured in the video mode is 1,920 x 1,080.
0 Some SD cards may not support continuous shooting.
0 The continuous shooting speed will drop if this function is used repeatedly.
SMILE SHOT
Automatically captures a still image upon detection of a smile.
“Capturing Smiles Automatically (SMILE SHOT)” ( A p. 45)
SMILE%/NAME DISPLAY
Displays the names and smile levels (%) when faces are detected.
“Setting SMILE%/NAME DISPLAY” ( A p. 50)
PET SHOT
Automatically captures a still image upon detection of the face of a pet, such as dogs or cats.
“Capturing Pets Automatically (PET SHOT)” ( A p. 46)
SEAMLESS RECORDING (GZ-EX355)
Continues recording on the SD card without stopping when the remaining space on the built-in memory runs out.
SettingDetailsOFFDoes not switch recording media automatically.ONSwitches recording media automatically.Memo : 
0 Seamless recording cannot be performed if there is not enough free space in the SD card.
0 0028  appears if seamless recording cannot be performed.
0 To start seamless recording again after the previous session is complete, it is necessary to combine seamless videos, or delete the combination information
of the seamless videos.
0 Seamless recording can be performed if the video recording format is iFrame.
“Combining Videos Recorded by Seamless Recording” ( A p. 83)
VIDEO REC FORMAT
Select the recording format from “AVCHD”, or “iFrame” which is suitable for importing to “iMovie”.
SettingDetailsAVCHDRecords in AVCHD format.iFrame
(GZ-EX355/GZ-EX310)Record in iFrame format, which is suitable for importing to iMovie.Memo : 
0 iFrame is a recording format to be handled by the Mac computer. Operation on the Windows PC is not guaranteed.Settings Menu227 
						

							VIDEO QUALITY
Sets the video quality.
SettingDetails(if the video recording format is AVCHD)UXPEnables recording in the best picture quality.
0 Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs.XPEnables recording in high picture quality.SPEnables recording in standard quality.EPEnables long recordings.SSWEnables recording in the best picture quality.SEWEnables recording in the best picture quality.(if the video recording format is iFrame)iFrame(1280x720)
(GZ-EX355/GZ-EX310)Records videos that are suitable for editing in 1280x720 resolution.iFrame(960x540)
(GZ-EX355/GZ-EX310)Records videos that are suitable for editing in 960x540 resolution.Memo : 
0 Set to “UXP” or “XP” mode when recording fast-moving scenes or scenes with extreme changes of brightness to avoid noise.
0 Use an BD writer (external Blu-ray drive) to save videos recorded in “UXP” mode.
0 You can change to the desired “VIDEO QUALITY” by tapping on it from the remaining recording time display.
ZOOM
Sets the maximum zoom ratio.
SettingDetails40xEnables recording with 1 - 40x optical zoom. Set this when digital zoom is not desired.60x DYNAMIC
(55x DYNAMIC)Enables recording with 1 - 40x optical zoom and 41 - 60x dynamic zoom, when the image stabilizer is in
normal mode or set to off.
(Enables recording with 1 - 40x optical zoom and 41 - 55x dynamic zoom, when the image stabilizer is in
active mode, or when the camera is set to the iFrame mode.)120x DIGITAL
(110x DIGITAL)Enables recording with 1 - 40x optical zoom and 41 - 120x digital zoom, when the camera is set to the AVCHD mode.
(Enables recording with 1 - 40x optical zoom and 41 - 110x digital zoom, when the camera is set to the iFrame
mode.)200x DIGITALEnables recording with 1 - 40x optical zoom and 41 - 200x digital zoom.Memo : 
0 When digital zoom is used, the image becomes grainy as it is digitally enlarged.
0 The angle of view changes when the image stabilizer is turned on or off.
ZOOM MIC
Sets the zoom microphone.
SettingDetailsOFFDeactivates the zoom microphone.ONRecords audio sounds in the same direction as the zoom operation.
MIC LEVEL
Make the adjustments such that “MIC LEVEL” does not turn red.
SettingDetailsOFFHides display of microphone input level.Settings Menu228 
						

							ONShows display of microphone input level.
MIC LEVEL SETTING
Sets the microphone level.
Make the adjustments such that “MIC LEVEL” does not turn red.
SettingDetails+2Increases the microphone input level.+1Increases the microphone input level slightly.0The microphone input level is not changed.-1Decreases the microphone input level slightly.-2Decreases the microphone input level.
K2 TECHNOLOGY
Reduces the degradation of sound quality caused by digital signal processing, and records a sound quality close to the original.
SettingDetailsOFFDeactivates K2 TECHNOLOGY.ONActivates K2 TECHNOLOGY.Settings Menu229 
						

							SPECIAL RECORDING Menu (video)
.
HIGH SPEED RECORDING
You can record videos in slow-motion by increasing the recording speed to emphasize the movements, and play back the slow-motion video smoothly.
This is a handy function for checking movements, such as golf swings.
“Slow-motion (High-speed) Recording” ( A p. 53)
TIME-LAPSE RECORDING
This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.
“Recording at Intervals (TIME-LAPSE RECORDING)” ( A p. 54)
STOP-MOTION REC
By pressing the SNAPSHOT button, 2 frames of still images are recorded, and stop-motion videos are created by piecing these images together.
“Recording Stop-Motion Videos (STOP-MOTION REC)” ( A p. 56)
AUTO REC
Starts recording automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor.
“Recording Automatically by Sensing Movements (AUTO REC)” ( A p. 57)
ANIMATION EFFECT
Records videos with animation effects.
“Recording with Animation Effects (ANIMATION EFFECT)” ( A p. 39)
DECORATE FACE EFFECT
Detects faces and enables decorations such as crowns or sunglasses to be added.
“Recording with Face Decorations (DECORATE FACE EFFECT)” ( A p. 41)
STAMP
Records videos with various decorative stamps.
“Recording with Decorative Stamps (STAMP)” ( A p. 42)
HANDWRITING EFFECT
Records videos with your personal handwriting or drawing. If the writings and drawings appear to be misaligned, correct the touch position.
“Recording with Personal Handwriting (HANDWRITING EFFECT)” ( A p. 43)
DATE/TIME RECORDING
You can record videos together with the date and time.
Set this when you want to save the file with date and time display.
(The date and time cannot be deleted after recording.)
“Recording Videos with Date and Time” ( A p. 60)
Settings Menu230