Mitel Sx-100, Sx-200 Attendant Console Guide

CALL WDRWAtiD (CANCELLING ALL) 
you may be asked to cancel all call 
Forwarding arrangem ents set up by 
.-. 
extensions: 
3 
0 Dial # 
0 Press RELEASE key 
0 ANSWER and DESTINATION lamps 
go 
out 
i 
l Dial *l 
0 ANSWER lamp lights 
l DESTINATION lamp lights 
2 
Destination display shows: 
I 
0 1-i 
0 ATT lamp lit NOTE- If trunk is assigned to a busy 
lamp iumber, then that lamp lights.  

CONFERENCE CALL 
You have been asked to set up a 
conference call (maximum of six 
parties) : 
1 0 Dial the number of the next party in 
the conference. When they answer: 
0 Press CONF key 
0 CONF lamp lights 
@ANSWER lamp lit 
0 DESTINATION lamp lit 
2 Destination display shows: 
0 t (conference) 
0 You are connected to the calling 
party 
3 0 All parties hear a short burst of 
tone indicating that you and the 
called party are connected to the 
conference 
4 0 Press RELEASE key 
0 CONF lamp lit 
0...

CONFERENCE RECALL 
(ANSWERING RECALL) 
You have set up a conference, and one After speaking with the conference: 
of the parties in the conference wishes 
to recall you (by flashing the 
4 0 Press RELEASE key 
switchhook). 0 CONF lamp lit 
0 ANSWER lamp goes out 
0 Destination display clears 
4 0 CONF lamp flashes 0 You are disconnected from the 
conference 
2 0 Press CONF key 
l CONF lamp lights 
l ANSWER lamp lights 5 l To add additional parties to the 
conference, see page B8 
l AII parties in the...

I i 
1. 
DATE DISPLAY 
Destination display shows: 
1 l press and hold IDENT key 4 0 Internal software code and console 
number 
2 
Time display shows: 
0 Month, day and year 
3 
Source display shows: 
0 Generic issue number 5 0 Release IDENT key 
l Time display returns 
l Source and Destination displays 
clear  

DIRECT INWARD SYSTEM 
. 
ACCESS (DISA) 
1 
0 Dial >1

DO NOT DlsTURB (SETTING up) 
To set up: 
3 0 Press RELEASE key 
you are connected to a Destination - 0 All displays clear 
1 
0 Busy lamp field shows extension 
Destination display shows: 
l Extension number busy 
0 Class of service 
0 ATT lamp lit 
2 
e Press DO NOT DSTB key 
0 DO NOT DSTB lamp lights 
l Busy lamp field shows aXtenSiOn 
busy  

DO NOT DISTURB (CANCELLING) 
To cancel: 
You are connected to a Source - 
3 0 Press RELEASE key 
0 All displays clear 
1 Source display shows: 
0 Extension number 
0 Class of service 
0 ATT lamp lit 
2 0 DO NOT DSTB lamp lit 
0 Press DO NOT DSTB key 
0 DO NOT DSTB lamp goes out 
B14  

EXTENSION OUT OF SERVICE 
If you have been asked to take an 
extension out of service temporarily: 
I 0 Dial >(k 
3 Destination display shows: 
0 Number dialed and I- 
l ATT lamp lit 
4 0 Press RELEASE key 
0 Destination display 
clears 
0 DESTINATION and ANSWER lamps 
go out 
0 Extension busy lamp lights 
Extension is now out of service. 
If you dial an extension that has been 
taken out of service, the Destination 
display will show a Class of Service of 
00, and the ERR lamp will light. 
:-‘:-.‘. 
L....

RESTORING EXTENSION SERVICE 
To restore an extension to service: 
1 0 Dial *I2 
0 DESTINATION and ANSWER lamps 
light 
2 0 Dial the required extension number 
0 Dial # 
3 Destination display shows: 
0 Number dialed and -I 
0 ATT lamp lit 
4 0 Press RELEASE key 
0 Destination display clears 
0 DESTINATION and ANSWER lamps 
go out 
0 Extension busy lamp goes out 
Extension is restored to service 
If you dial an extension that has been 
taken out of service, the Destination 
display will show a Class of...