OKI C110 User Manual

							11 - C110 User’s Guide
The Control Panel 
1—Ready indicator
2—Attention indicator
3—Rotate Toner key
4—Toner indicators
5—Cancel key
The Indicators
The indicators use five types of signals:
Off
On
Slow blinking—1 blink every 2 seconds
Blinking—1 blink per second
Rapid blinking—2 blinks per second
Each of the indicators has the following basic meaning.
Ready indicator
When lit, printing can be performed.
Attention indicator
When lit or blinking, an error has occurred or there is a warning.
Toner indicators
When blinking, the toner for the corresponding color is about to run out.
When lit, the toner in the corresponding color is empty.
In addition, printer warnings and errors may be indicated by combinations of 
the various types of signals used by the indicators in the control panel 
(indicator messages).
YMCK
READYEADY
RO TAT EOTATETONERONER
ATTENTIONTTENTION
CANCELANCEL
1
2
34 5
Downloaded From ManualsPrinter.com Manuals 
						

							12  -  C110 User’s Guide
For details on these indicator messages, refer to “Indicator Messages” on 
page 86.
The Remote Panel Utility can also be used to check the printer status. For 
details, refer to 
“Working with the Remote Panel Utility” on page 25.
The Rotate Toner KEY
The Rotate Toner key allows you to switch the printer from normal operation 
mode to Change Toner mode, Eject All Toner mode or Print Head Cleanup 
mode.
The mode that the printer enters depends on how long the Rotate Toner key 
is held down.
NoteWhen the printer is switched to any of these operation modes, the 
magenta toner indicator lights up.
The Rotate Toner key is used in the following situations.
When replacing a toner cartridge
When replacing all toner cartridges at the same time
When cleaning the print head window
When replacing a toner cartridge
Press the Rotate Toner key.
The printer enters Change Toner mode.
NoteFor details on replacing a toner cartridge, refer to “Replacing a 
Toner Cartridge” on page 47.
NoteTo return to normal operation mode from Change Toner mode, 
press the Cancel key.
Length of time that 
the Rotate Toner key 
is held downMode that the printer 
entersIndicators on the control 
panel
Less than 5 secondsChange Toner mode-
5 to 10 secondsPrint Head Cleanup 
modeAll indicators blink once after 
the key has been held down 
for 5 seconds.
More than 10 secondsEject All Toner modeAll indicators flash once after 
the key has been held down 
for 10 seconds.
Downloaded From ManualsPrinter.com Manuals 
						

							13  -  C110 User’s Guide
When cleaning the print head window
Hold down the Rotate Toner key for 5 seconds to 10 seconds.
The printer enters Print Head Cleanup mode.
NoteFor details on cleaning the print head window, refer to “Cleaning 
the Print Head Window” on page 73.
NoteTo return to normal operation mode from Print Head Cleanup 
mode, refer to 
“Cleaning the Print Head Window” on page 73.
NotePrint Head Cleanup mode is a mode that allows the user to clean 
the print head window more easily. The print head window is not 
cleaned automatically.
When replacing all toner cartridges at the same time
Hold down the Rotate Toner key more than 10 seconds.
The printer enters Eject All Toner mode.
NoteFor details on replacing all toner cartridges at the same time, refer to 
“Replacing All Toner Cartridges at the Same Time” on page 52.
NoteTo return to normal operation mode from Eject All Toner mode, press 
the Clear key.
The Cancel KEY
The Cancel key allows you to:
Continue a print job after addressing an error message
Cancel a print job
Reset the printer after a toner cartridge is replaced
NoteFor details on resetting the printer after replacing a toner cartridge, 
refer to 
“Replacing a Toner Cartridge” on page 47.
Continuing a Print Job after an Error Message
You can continue a print job after correcting the following types of errors:
No more media in the tray
Media other than that set in the printer driver was fed into the printer
NoteFor details on the error messages, refer to “Indicator Messages” on 
page 86.
Downloaded From ManualsPrinter.com Manuals 
						

							14  -  C110 User’s Guide
If any of the errors listed above occur, press the Cancel key to continue the 
print job.
Cancelling a Print Job
You can cancel a print job that is currently being processed.
While data is being processed or printed (the green Ready indicator is 
blinking), hold down the Cancel key for more than 5 seconds to cancel the 
print job.
Both the Ready and Attention indicators blink when the print job is cancelled.
Downloaded From ManualsPrinter.com Manuals 
						

							15  -  C110 User’s Guide
The Printer Driver and Utility CD .
DriversUse/Benefit
Windows Vista/Server 2008/XP/
Server 2003/2000These drivers give you access to all of 
the printer features. For details, refer 
to
“Displaying Printer Driver Settings” 
on page 20.Windows Vista/Server 2008/XP/
Server 2003 for 64bit 
UtilitiesUse/Benefit
Remote Panel UtilityFrom the Remote Panel Utility, the 
current status of this printer can be 
checked.
For details, refer to “Working with the 
Remote Panel Utility” on page 25.
DocumentationUse/Benefit
User’s Guide (this manual)This manual provides details on 
general daily operations, such as 
using the drivers and control panel 
and replacing consumables.
Downloaded From ManualsPrinter.com Manuals 
						

							16  -  C110 User’s Guide
System Requirements
Personal computer 
Pentium II: 400MHz or higher
Operating System
–Microsoft Windows Vista Home Basic/Home Premium/Ultimate/
Business/Enterprise, 
–Windows Vista Home Basic/Home Premium/ Ultimate/Business/
Enterprise x64 Edition, 
–Windows Server 2008
–Windows Server 2008 x64 Edition
–Windows XP Home Edition/Professional (Service Pack 2 or later),
–Windows XP Professional x64 Edition
–Windows Server 2003
–Windows Server 2003 x64 Edition
–Windows 2000 (Service Pack 4 or later)
Free hard disk space  
256 MB or more
RAM 
128 MB or more
CD drive
I/O interface
USB Revision 2.0 and USB Revision 1.1 compliant port
NoteThe USB cable is not included with the machine.
NoteThis printer cannot be used as a shared printer.
Downloaded From ManualsPrinter.com Manuals 
						

							17  -  C110 User’s Guide
Using the Printer 
Driver
Downloaded From ManualsPrinter.com Manuals 
						

							18  -  C110 User’s Guide
Selecting Printer Driver Defaults
Before you start working with your Printer, you are advised to verify and 
change the default printer driver settings if necessary.
1Choose the driver’s properties as follows:
–(Windows Vista/Server 2008) 
From the Start menu, select Control Panel, and then click Hardware 
and Sound to select Printers. Right-click the icon for this printer, and 
then select Printing Preferences.
–(Windows XP/Server 2003) 
From the start menu, select Printers and Faxes to display the Print-
ers and Faxes directory. Right-click the icon for this printer, and select 
Printing Preferences.
–(Windows 2000) 
From the Start menu, select Settings and then Printers to display the 
Printers directory. Right-click the icon for this printer, and select Print
-
ing Preferences.
2Select the Basic tab. Select the default settings for your printer, such as 
the default media format you use.
3Click Apply.
4Click OK to exit from the Printing Preferences dialog box.
Downloaded From ManualsPrinter.com Manuals 
						

							19  -  C110 User’s Guide
Uninstalling the Printer Driver
This section describes how to uninstall the printer driver if necessary.
NoteYou must have administrator privileges in order to uninstall the printer 
driver.
NoteIf the User Account Control window appears when uninstalling on 
Windows Vista or Server 2008, click the Allow button or the Continue 
button.
Windows Vista/Server 2008/XP/Server 2003/2000
1Close all applications.
2Choose Uninstall Program as follows:
–(Windows Vista/Server 2008/XP/Server 2003) 
From the Start, All programs menu, choose the item that contains 
the printer utilities, and then Uninstall.
–(Windows 2000) 
From the Start, Program menu, choose the item that contains the 
printer utilities, and then Uninstall.
3When the Uninstall dialog box appears, select the printer to be deleted, 
and then click Uninstall button.
4The printer driver will be uninstalled from your computer.
Downloaded From ManualsPrinter.com Manuals 
						

							20  -  C110 User’s Guide
Displaying Printer Driver Settings
Windows Vista/Server 2008
1From the Start menu, select Control Panel, and then click Hardware 
and Sound to select Printers. 
2Right-click the icon for this printer then select Printing Preferences. 
Windows XP/Server 2003
1From the start menu, select Printers and Faxes to display the Printers 
and Faxes directory.
2Right-click the icon for this printer and select Printing Preferences.
Windows 2000
1From the Start menu, select Settings, and then click Printers to display 
the Printers directory.
2Right-click the icon for this printer and select Printing Preferences.
Downloaded From ManualsPrinter.com Manuals