73 - C110 User’s Guide
5Carefully close the top cover.
Cleaning the Print Head Window
1Use either operation described below to switch the printer to Print Head
!Hold down the Rotate Toner key for 5 to 10 seconds.
!On the Panel tab of the Remote Panel Utility, click the P/H Clean Up
The printer enters Print Head Cleanup mode, and the magenta toner indi-
cator lights up.
NoteIt is not possible to exit Print Head Cleanup mode before the
operation is finished (even if the Clear key is pressed).
If the printer has incorrectly been switched to Print Head Cleanup
mode, perform steps 2 through 4, then steps 10 through 14
(skipping steps 5 through 9) to exit Print Head Cleanup mode.
2Open the front cover.
NoteBefore opening the front
cover, open Tray 1 if it is
not already open.
The magenta toner cartridge has
been moved to the position from
where it can be replaced.
Downloaded From ManualsPrinter.com Manuals