Panasonic Digital Imaging System DP-3510/4510/6010 Copier & Network Scanner Operating Instructions

111
Problem Solving
1
2
3
#Pull out the finisher.
$Pull out the trash box.
(See Page 87)
%Open the stapler cover.
(See Page 86)CMake sure that the misfeed indicator
resets after removing all misfed paper.
$
#
#
$

 

 


2-Bin Finisher (DA-FS330)
I
Upper Cover
Misfed Paper
Knob A
Misfed Paper
When paper cannot be removed:
4
$
#5
When the misfed paper is not found:
Knob B
#Close the staple cover and
install the trash box.
$Return the finisher to original
position.
6
Finisher Guide...

112
Problem Solving
1
2
3
CMake sure that the misfeed indicator
resets after removing all misfed paper.

 

 


1-Bin Saddle-Stitch Finisher (DA-FS355)
Misfed Paper
Finisher
5
Return the finisher to original
position.
4
Upper Cover
Upper Cover
Removing a Misfed Paper
P112-113_dp4510(pb).P657/31/02, 10:50 AM 112   

113
I
Problem Solving
1
2
3
CMake sure that the misfeed indicator
resets after removing all misfed paper.
5
Close the Finisher Front
Cover.

 

 


1-Bin Saddle-Stitch Finisher (DA-FS355)
4
Misfed Paper
Finisher Front Cover
Lower
Knob
Stitch Tray
6
7
Finisher
8
Inner Cover
Return the finisher to original
position.
9
Misfed Paper
P112-113_dp4510(pb).P657/31/02, 10:50 AM 113     

114
Removing a Misfed Paper
1
2
3

Paper Transport  Area
Problem Solving
4
Transport Release Lever
Paper
Transport
Knob
Push and Turn
5
Ensure to close the Front
Cover.
1

Paper Entry Area
2
Right Cover
Misfed Paper
3
4
Push back the Paper Tray 1 or 2.
Close the Right Cover.5
P114_dp4510(pb).P657/31/02, 10:50 AM 114     

115
I
1
2
3

Paper Exit/Fuser Area
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
Problem Solving
Front Cover
Exit Cover
Fuser Knob
4
Magnet
Heat Roller Cover
5
Ensure to close the Heat Roller
Cover, Exit Cover and the Front
cover.
Caution
heated
surface
6
1

Reverse Area
2
Left Cover
3
Close the Left Cover.
P115_dp4510(pb).P657/31/02, 10:50 AM 115     

116
Removing a Misfed Paper
1
2
3

Automatic Duplex Unit (ADU)
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
Problem Solving
4
1
2
Transport Release Lever
Automatic Duplex Unit
Knob 5 (Centre)
5
6
2
1
Knob 5 (Right)
7
Push back the ADU into the copier.
Knob 5 (Left)
8Push and turn
9
Ensure to close the Front Cover.
P116_dp4510(pb).P657/31/02, 10:50 AM 116   

117
I
Problem Solving
1
2

System Console
(DA-DS601/DS602)
3
4
Push back the Paper Tray 3 or 4.
Close the Right Cover Lower.
Right Cover Lower
Misfed Paper

 

 


Large Capacity Paper Tray
(DA-MA301)
1
#Hold the latch and slide the large
capacity paper tray to the right.
Misfed Paper
Latch
2
Misfed PaperDoor
#Close the door.
$Return the large capacity paper
tray to original position.
3
P117_dp4510(pb).P657/31/02, 10:50 AM 117   

118
Problem Solving
1
2

i-ADF
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
3
ADF Cover
Inner CoverMisfed Paper
ADF Tray
4
P9250577
Green
Labelled Tab
Exit Guide
5
Misfed
Paper
6
Exit Guide
7
8
Close the ADF.
Misfed Paper
Removing a Misfed Paper
P118_dp4510(pb).P657/31/02, 10:51 AM 118   

119
Troubleshooting
Before Calling Service
Check Action
Unit Does Not Operate
Does the display light?
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 56)Press Energy Saver key on the control
panel.
Perform actions in accordance with each
message. Does any of the U## codes and messages
appear on the...

120
Troubleshooting
Check Action
Marked Copies
Is the copier Platen Glass or Platen Sheet
dirty?Clean the Platen Glass or Sheet.
(See below)

If the measures outlined above do not solve the problem, call your Service provider.
Copier Care

 As a rule, clean weekly.
Platen Glass/Platen Sheet
#Wipe marks off with a cloth and a neutral
detergent.
$Wipe again with a dry cloth. Platen Sheet
Platen (glass) Is the original an OHP film or a dark
original?Cover the original with a sheet of white
paper before...