Panasonic Dmc Fx80 Operating Instructions Manual

							- 101 -
Playback/Editing
You can play back the pictures you have taken in synchronisation with music, and you can 
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show co mposed of only still pictures, only motion 
pictures, only 3D pictures etc.
We recommend this feature when you view your  pictures by connecting the camera to a 
TV.
∫ Operations performed during slide show
•
Normal playback resumes after the slide show finishes.
[Slide Show] Touch the group to play back.
•Refer to  P134 for the method to playback [3D Play] 
pictures in 3D.
•In [My Photo Album], touch the album you wish to play 
back.
For details on [My Photo Album], refer to  P106.
•In [Category Selection], touch the category you wish 
to play back.
For details on categories, refer to  P103.
Touch [Start].
1
Display control panel by touching screen.
•If no operation is done for 2 seconds, it will return to original status.
2Operate control panel by touching.
Play/PauseExit slide show
Back to previous picture
(while pausing/playing back 
motion pictures/during 
panorama playback)Ahead to next picture
(while pausing/playing back 
motion pictures/during 
panorama playback)
Increase volume levelReduce volume level 
						

							Playback/Editing
- 102 -
∫Changing the slide show settings
You can change the settings for Slide Show Playback by selecting 
[Effect] or [Setup] on the slide show menu screen.
[Effect]
This allows you to select the screen effects or music effects when 
switching from one picture to the next.
[Natural], [Slow], [Swing], [Urban], [Off], [Auto]
•
When [Urban] has been selected, the picture may appear in black and white as a screen effect.•[Auto] can be used only when [Category Selection] has been selected. The pictures are played 
back with the recommended effects in each category.
•During the [Motion Pic. Only] slide show, [Effect] is fixed to [Off].•Some [Effect] will not operate when playing back pictures displayed vertically.
[Setup]
[Duration] or [Repeat] can be set.
•
[Duration] can be set only when [Off] has been selected as the [Effect] setting.•When playing back a panorama picture, the [Duration] setting is disabled.
ItemSettings
[Duration] [1 sec.]/[2 sec.]/[3 sec.]/[5 sec.]
[Repeat] [On]/[Off]
[Sound] [Off]:
There will be no sound.
[Auto]: Music is pl ayed when the still pictures are played 
back, and audio is played when the motion pictures 
are played back.
[Music]: Music is played back.
[Audio]: Audio (only for motion pictures) is played back. 
						

							- 103 -
Playback/Editing
Pictures are classified into only still pictures, only motion pictures, or only 3D pictures etc., 
and played back.
∫ About the categories to be sorted
It will be sorted as following when [Category Selection] is set.
¢ Play back by selecting and touching the pict ure of the person you desire to play back.
[Filtering Play]
ItemSettings
[Picture Only] Only still pictures are played back.
[Video Only] Only motion pictures are played back.
[3D Play] Only 3D pictures are played back.
•Refer to 
P134 for the method to playback [3D Play] pictures in 3D.
[Category Selection] This mode allows you to search images by Scene Mode or other 
categories (such as [Portrait], [Scenery] or [Night Scenery]) and sort 
the pictures into each of the categories. You can then play back the 
pictures in each category.
Touch the category to play back.
•Only the category for which pictures have 
been found can be selected.
[Favorite] You can play back the pictures you have set as [Favorite] (P113) .
Recording information e.g. Scene Modes
[Face Recog.]¢
*[Portrait], [i-Portrait], [Night Portrait], [i-Night Portrait], [Cosmetic Mode], 
[Baby1]/[Baby2], [i-Baby]
,[Scenery], [i-Scenery], [Sunset], [i-Sunset], [Glass Through], [Panorama Shot]
.[Night Scenery], [i-Night Scenery], [Night Portrait], [i-Night Portrait], [Handheld 
Night Shot]
[Sports]
Î[Baby1]/[Baby2], [i-Baby]
í[Pet]
1[Food]
[Travel Date] 
						

							Playback/Editing
- 104 -
Pictures registered to an album can be played back by the albums with [My Photo Album].
•For details on [My Photo Album], refer to  P106.
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as the 1st January, 2012.•If you take pictures after setting the travel destination in [World Time], the pictures are 
displayed by the dates at the travel destination in Calendar Playback.
[Playback Album]
[Calendar]
Touch [ ]/[ ] to select the month to be 
played back.
•If there were no pictures recorded during a month, 
that month is not displayed.
•Touch [ ] to display the multi playback screen.
Select the date you wish to play back, and 
then touch [Set].
Touch the picture you wish to play back.
•Touch [ ] to return to the calendar search display 
screen. 
						

							- 105 -
Playback/Editing
Using the [Playback] Menu
You can setup pictures to be uploaded to image sharing sites and perform editing like 
cropping recorded pictures, as well as set up the protection of recorded images, etc.
•
With [Text Stamp], [Resize] or [Cropping], a new edited picture is created. A new picture cannot 
be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
•
You can only upload motion pictures to YouTube, while you may upload both motion pictures 
and still pictures to Facebook.
•This cannot be done to the images in the built-in memory. Copy the images to a card 
(P118) , and then perform the [Upload Set].
Select [Upload Set] on the [Playback] menu.  (P39)
∫Upload to the image sharing sites
An upload tool built into the camera, “LUMIX Image Uploader,” is automatically copied to 
the card when you set up [Upload Set].
Perform the upload operation after connecting the camera to a PC  (P140). For details, 
refer to  P143.
[Upload Set]
Touch [Single] or [Multi].
Select the picture.
[Single] setting
Select the picture and touch [Set].
•
Setting is cancelled by touching [Cancel].•Exit the menu after it is set.
[Multi] setting
1Touch the picture you wish to upload (repeat).
•Setting will be cancelled by touching the same picture 
again.
2Touch [OK].
•Confirmation screen is displayed. It is executed when 
[Yes] is selected. 
Exit the menu after it is executed. 
						

							Playback/Editing
- 106 -
∫Cancelling all the [Upload Set] settings1Select [Upload Set] on the [Playback] menu.2Touch [Cancel].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•Setting may not be possible for pictures recorded with other cameras.•It cannot be set with the card less than 512 MB.
Pictures can be copied into s pecific albums and you can selectively retrieve your favourite 
ones.
Registering pictures contained in the card by album allows the following.
•
Playing back only the pictures regist ered in albums. ([Playback Album])•Playing back the pictures registered in albums only as a slide show.
Note
•Pictures in the built-in memory cannot be regist ered in albums. Register them after copying 
them to cards.
•To cancel the picture registered with [My Photo Album], delete it from [Playback Album]. 
(Original picture will not be deleted.)
•Motion pictures cannot be registered in albums.•Pictures recorded with other equipm ent may not be registered in albums.
[My Photo Album]
Select [My Photo Album] on the [Playback] menu.  (P39)
Touch a picture to register. 
(repeat this step)
•Touch the same picture again to cancel the selection.
Touch the picture you selected in step 2 until the 
selection frame reappears and drag it to the 
album where you want to register it.
•Three types of albums [ ]/[ ]/[ ] are available for 
registration.
•Up to 999 pictures can be registered in a single album.•Up to 50 pictures can be selected at once.•Exit the menu after it is set. 
						

							- 107 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [Text Stamp] (P108).
Select [Title Edit] on the [Playback] menu.  (P39)
Touch [Single] or [Multi].
Enter the text.  (P74)
•Exit the menu after it is set.
Note
•To delete the title, erase all the text in the text input screen.•You can print out texts (comments) using the “ PHOTOfunSTUDIO ” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [Multi].•[Title Edit] cannot be used in the following cases:–Motion pictures–3D pictures–Pictures recorded with other equipment
[Title Edit]
Select an image to add text to.
•[’] is displayed for pictures with titles already registered.
[Single] setting
Select an image and touch [Set].
[Multi] setting
1Touch a picture (repeat).
•Selection will be cancelled by touching the same picture 
again.
2Touch [OK]. 
						

							Playback/Editing
- 108 -
You can stamp the recording date/time, name, location, travel date or title onto the 
recorded pictures.
Select [Text Stamp] on the [Playback] menu. (P39)
Touch [Single] or [Multi].
Touch [Set].
[Text Stamp]Select an image you wish to stamp with text.
•[‘ ] is displayed on pictures already with date or text 
stamped.
[Single] setting
Select an image and touch [Set].
[Multi] setting
1Touch a picture (repeat).
•Selection will be cancelled by touching the same picture 
again.
2Touch [OK]. 
						

							- 109 -
Playback/Editing
Select the information item that you want to stamp, and touch [OK].
To u c h  [ ] .
To u c h  [ O K ] .
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [Multi].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the 0.3M pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures recorded without setting the clock and title–Pictures with date or text stamped–Pictures recorded with other equipment
ItemSetting item
[Shooting Date] [W/O Time]:
Stamp the year, month and date.
[With Time]: Stamp the year, month, day, hour and 
minutes.
[Off]
[Name] [Face 
Recognition]:
Stamps names registered in name settings for 
[Face Recog.].
[Baby/Pet]: Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene Mode.
[Off]
[Location] [On]:
Stamps the travel destination name set under 
[Location].
[Off]
[Travel Date] [On]:
Stamps the travel date set under 
[Travel Date].
[Off]
[Title] [On]:
Title input in the [Title Edit] will be stamped.
[Off] 
						

							Playback/Editing
- 110 -
Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictur es by using [Calendar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.
[Video Divide]
Select [Video Divide] on the [Playback] menu.  (P39)
Select the motion picture you wish to divide, and touch [Set].
Touch [ ] at the location to divide.
•Motion picture is played back from the same location when [ ] is touched again.
•Make fine adjustments to the division position by touching [ ]/[ ] while the motion 
picture is paused.
To u c h  [ ] .
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the 
dividing.