Panasonic Dmc Fz8 Operating Instructions Manual

Advanced (Playback)
101VQT1B25
∫Single setting
1Press 2/1 to select the picture 
and then press 4.
2Press 3/4/2/1 to select 
[SHOOTING DATE], [AGE] or 
[TRAVEL DATE] and then press 
[MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P66, 67)
If this is set to [ON], the age is stamped 
on pictures recorded when the camera 
was set to [WITH AGE].
[TRAVEL DATE] (P72)
If this is set to [ON], the travel date is 
stamped on pictures recorded when 
[TRAVEL DATE] was set to [ON].
3Press [MENU/SET].
 If you set...

Advanced (Playback)
102VQT1B25
∫Multi setting
1Press 2/1 to select the picture 
and then press 4 to SET/CANCEL.
 Repeat this step.
2Press [MENU/SET]. After performing step2, perform 
step2 onwards in “When [SINGLE ] is 
selected”.
 When you print pictures stamped with 
the date stamp, the date will be printed 
over the stamped date if you set date 
printing at the photo printing store or 
on the printer.
 We recommend setting date stamp when 
there is plenty of space on the built-in 
memory or the card....

Advanced (Playback)
103VQT1B25
∫Single setting
1Press 21 to select the picture 
to print and then press 34 to 
set the number of prints.
 The number of prints icon [ ] A 
appears.
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
∫Multi setting
1Press 21 to select the picture 
to print then press 34 to set 
the number of prints.
 The number of prints icon [ ] B 
appears.
 Repeat...

Advanced (Playback)
104VQT1B25
 DPOF is an abbreviation of “Digital Print 
Order Format”. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
 DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge (P113). 
The date printing setting on the printer 
may take priority over the date printing 
setting on the camera. Check the date 
printing setting on the printer also. (P113)
 It is...

Advanced (Playback)
105VQT1B25
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P97)
You can add the audio after taking a 
picture.
1Press 21 to select the picture 
and then press 4 to start audio 
recording.
 The message [OVERWRITE AUDIO 
DATA?] screen appears when audio has 
already been recorded. Press 3 to 
select [YES] and then press [MENU/
SET] to start audio recording. (The 
original audio is overwritten.)
 Audio dubbing cannot be used with the 
following pictures.
– Motion...

Advanced (Playback)
106VQT1B25
2Press 21 to select the size and 
then press 4.
 Sizes smaller than the recorded picture 
are displayed.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
3Press 34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. Resized pictures cannot 
be restored when they are overwritten.
 A resized picture is newly created when 
you select [NO].
 If the original picture is protected, you 
cannot overwrite it. Select [NO] and...

Advanced (Playback)
107VQT1B25
4Press shutter button.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
5Press 34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. The trimmed pictures 
cannot be restored when they are 
overwritten.
 A trimmed picture is newly created 
when you select [NO].
 When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a trimmed picture.
6Press [MENU/SET] twice to close 
the menu.
\...

Advanced (Playback)
108VQT1B25
3Press 21 to determine the 
horizontal position and press the 
shutter button to set.
3/4 to set the frame position for 
pictures rotated vertically.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
4Press 3/4 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. If you convert the aspect 
ratio of a picture and then overwrite it, 
you cannot restore it.
 A picture with the converted aspect ratio 
is newly created when you...

Advanced (Playback)
109VQT1B25
 Do not turn the camera off or perform 
any other operations before copying is 
finished. The data on the built-in 
memory or the card may be damaged 
or lost.
4Press [MENU/SET] several times 
to close the menu.
 If you copy picture data from the built-in 
memory to a card, the screen 
automatically returns to the playback 
screen when all the pictures are copied.
 If you copy picture data from the built-in 
memory to a card, we recommend using a 
card which has more free...

Connecting to other equipment
110VQT1B25
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC 
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] 
(for Windows
®) in the CD-ROM (supplied) 
allows you to easily acquire pictures 
recorded with the camera to a PC, print 
them and send them by e-mail.
If you use “Windows
 98/98SE”, install 
the USB driver and then connect it to 
the computer.
For information about the...