Panasonic Dmc Fz8 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fz8 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 31
Basic 31VQT1B25 [SENSITIVITY] (P79): This setting becomes the same as when the highest ISO sensitivity is set to [ISO800] in intelligent ISO sensitivity mode [ ]. (P52) [ASPECT RATIO]/[PICT.SIZE]/[QUALITY] (P80): – [ ENLARGE]: : (7M)/ –[ 4qk6q/10k15cm]: : (2.5M EZ)/ –[ E-MAIL]: : (0.3M EZ)/ [AF MODE] (P83): [] [AF ASSIST LAMP] (P85): [ON] [METERING MODE] (P82): [] You cannot use the following functions. – High angle mode – White balance fine adjustment – Exposure compensation – Flash output...
Page 32
Basic 32VQT1B25 Taking Pictures with the Zoom You can make people and objects appear closer and landscapes can be recorded in wide angle with the 12k optical zoom. (35 mm film camera equivalent: 36 mm to 432 mm) ∫To make subjects appear closer use (Tele) Rotate the zoom lever towards Te l e . ∫To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide. ∫Changing the zoom speed You can operate the zoom at 2 speeds depending on the rotation angle of the zoom lever. The...
Page 33
Basic 33VQT1B25 This camera has a 12k optical zoom. However, if the picture size is not set to the highest setting for each aspect ratio [ / / ], a maximum of 18k optical zoom can be achieved with no picture quality deterioration. ∫Extended optical zoom mechanism When you set the picture size to [ ] (3M EZ) (3 million pixels), the 7M (7 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect. ∫Picture size and maximum zoom...
Page 34
Basic 34VQT1B25 A maximum of 48k zoom can be achieved with the 12k optical zoom and the 4k digital zoom when [D.ZOOM] is set to [ON] in the [REC] menu. However, if a picture size that can use extended optical zoom is selected, a maximum of 72k zoom can be achieved with the 18k extended optical zoom and the 4k digital zoom. ∫Menu operation 1Press [MENU/SET]. When a scene mode is selected, select the [REC] menu [ ] and then press 1. 2Press 34 to select [D.ZOOM] and then press 1. 3Press 4 to...
Page 35
Basic 35VQT1B25 Checking the Recorded Picture (Review) You can check the recorded pictures while still in [REC] mode. 1Press 4 [REV]. The last recorded picture appears for about 10 seconds. Review is canceled when the shutter button is pressed halfway or the 4 [REV] is pressed again. 2Press 2/1 to select the picture. 2: Play back the previous picture 1: Play back the next picture ∫Enlarging the picture 1Rotate the zoom lever towards [ ] (T). Rotate the zoom lever to [ ] [T] for a 4k...
Page 36
Basic 36VQT1B25 Playing back/Deleting Pictures The picture data on the built-in memory is played back or deleted when a card is not inserted. The picture data on the card is played back or deleted when a card is inserted. (P18) Once deleted, pictures cannot be recovered. Check the pictures one by one and delete unwanted pictures. ∫Playing back pictures Press 21 to select the picture. 2: Play back the previous picture 1: Play back the next picture ∫Fast forwarding/Fast rewinding Press and hold 2/1...
Page 37
Basic 37VQT1B25 ∫To delete [MULTI DELETE]/ [ALL DELETE] 1Press [ ] twice. 2Press 34 to select [MULTI DELETE] or [ALL DELETE] and then press [MENU/SET]. [MULTI DELETE] > step3. [ALL DELETE] > step5. [ALL DELETE EXCEPT ] (When [FAVORITE] (P99) is set only) > step 5. (However, this cannot be selected if none of the pictures have [ ] displayed.) 3Press 21 to select the picture and then press 4 to set. (Only when selecting [MULTI DELETE]) Repeat the above procedure. [ ] appears on the selected...
Page 38
Advanced (Recording pictures) 38VQT1B25 Advanced (Recording pictures) About the LCD Monitor/Viewfinder 1Switching the LCD monitor/ Viewfinder Press the [EVF/LCD] button to switch the monitor screen. ALCD monitor (LCD) BViewfinder (EVF) When the LCD monitor turns on, the Viewfinder turns off (and vice versa). 2Selecting the screen to be used Press the [DISPLAY] button to change the display. When the menu screen appears, the [DISPLAY] button is not activated. In playback zoom (P93), while playing...
Page 39
Advanced (Recording pictures) 39VQT1B25 In playback mode JNormal display KDisplay with recording information and histogram LNo display ¢4 Displayed if [BIRTHDAY SET.] and [WITH AGE] were set in [BABY1]/ [BABY2] (P66) and [PET] (P67) in scene mode before taking pictures. ¢5 The number of days that have passed since the travel date are displayed if [TRAVEL DATE] (P72) is set. In [NIGHT PORTRAIT] (P64), [NIGHT SCENERY] (P65), [STARRY SKY] (P67) and [FIREWORKS] (P68) in scene mode, the lines are...
Page 40
Advanced (Recording pictures) 40VQT1B25 ∫Monitor priority When [PLAY ON LCD] is set to [ON] on the [SETUP] menu (P23), the LCD monitor is turned on in the following cases. You can save the time it would take to switch the display to the LCD monitor even when using the Viewfinder to record. When switching from recording mode to playback mode. When reviewing pictures. (P35) When turning the camera on in playback mode. ∫Recording guide line When you align the subject on the horizontal and vertical...