Panasonic Kx Taw848 Feature Manual
Have a look at the manual Panasonic Kx Taw848 Feature Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 416
4.4 Extension [4]
416 Feature Guide
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the PS will check
its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-415.png "Page 416
4.4 Extension [4]
416 Feature Guide
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the PS will check
its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating...")
![Page 417
4.4 Extension [4]
Feature Guide 417
Ext No. or Floating Ext No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming call distribution group to which intercom
calls are forwarded.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating Ext No. (for Hurry-up)
Specifies the floating extension number of an incoming call distribution group for which Manual...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-416.png "Page 417
4.4 Extension [4]
Feature Guide 417
Ext No. or Floating Ext No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming call distribution group to which intercom
calls are forwarded.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating Ext No. (for Hurry-up)
Specifies the floating extension number of an incoming call distribution group for which Manual...")
![Page 418
4.4 Extension [4]
418 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the PS’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for One-touch)
Specifies the...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-417.png "Page 418
4.4 Extension [4]
418 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the PS’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for One-touch)
Specifies the...")
![Page 419
4.4 Extension [4]
Feature Guide 419
Optional parameter (or Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button
whose Parameter Selection on this screen is Specific.
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-418.png "Page 419
4.4 Extension [4]
Feature Guide 419
Optional parameter (or Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button
whose Parameter Selection on this screen is Specific.
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose...")
![Page 420
4.4 Extension [4]
420 Feature Guide
4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key
Data Copy
The flexible CO button settings of a PS can be copied to different PSs. Select the PS that has
the settings to copy to other PSs from the Extension Number / Name list, then click Copy To.
Destination Extension Line
Select the number and name of the PS that will receive the copied settings. Multiple PSs can
be selected. To select all PSs at once, click Select All.
4.4.11 DSS Console—Main [4-3-1]
A...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-419.png "Page 420
4.4 Extension [4]
420 Feature Guide
4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key
Data Copy
The flexible CO button settings of a PS can be copied to different PSs. Select the PS that has
the settings to copy to other PSs from the Extension Number / Name list, then click Copy To.
Destination Extension Line
Select the number and name of the PS that will receive the copied settings. Multiple PSs can
be selected. To select all PSs at once, click Select All.
4.4.11 DSS Console—Main [4-3-1]
A...")
![Page 421
4.4 Extension [4]
Feature Guide 421
4.4.12 DSS Console—Flexible Key [4-3-2]
Each flexible DSS button can be customized to access a certain feature. A maximum of 66
flexible DSS buttons can be customized for each DSS Console. Select the desired DSS
Console from the DSS Console No./ Pair Extension list.
Ty p e
Specifies the feature to be assigned to the flexible DSS button.
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-420.png "Page 421
4.4 Extension [4]
Feature Guide 421
4.4.12 DSS Console—Flexible Key [4-3-2]
Each flexible DSS button can be customized to access a certain feature. A maximum of 66
flexible DSS buttons can be customized for each DSS Console. Select the desired DSS
Console from the DSS Console No./ Pair Extension list.
Ty p e
Specifies the feature to be assigned to the flexible DSS button.
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line...")
![Page 422
4.4 Extension [4]
422 Feature Guide
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are
logged-in to or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-421.png "Page 422
4.4 Extension [4]
422 Feature Guide
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are
logged-in to or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used...")
![Page 423
4.4 Extension [4]
Feature Guide 423
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed. Va lu e Ra n g e1–7
Feature Guide References
Feature References
1.18.2 Flexible Buttons...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-422.png "Page 423
4.4 Extension [4]
Feature Guide 423
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed. Va lu e Ra n g e1–7
Feature Guide References
Feature References
1.18.2 Flexible Buttons...")
![Page 424
4.4 Extension [4]
424 Feature Guide
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the paired
extension will check its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group to which both
intercom and CO line calls are forwarded.
Ext No. or...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-423.png "Page 424
4.4 Extension [4]
424 Feature Guide
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the paired
extension will check its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group to which both
intercom and CO line calls are forwarded.
Ext No. or...")
![Page 425
4.4 Extension [4]
Feature Guide 425
Ext No. or Floating Ext No. (for Call Log)
Specifies the paired extension’s number or the floating extension number of an incoming call
distribution group for which call log information is displayed. If the cell is left empty, the paired
extension will display its own call log information.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-424.png "Page 425
4.4 Extension [4]
Feature Guide 425
Ext No. or Floating Ext No. (for Call Log)
Specifies the paired extension’s number or the floating extension number of an incoming call
distribution group for which call log information is displayed. If the cell is left empty, the paired
extension will display its own call log information.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating...")
![Page 426
4.4 Extension [4]
426 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the paired
extension’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-425.png "Page 426
4.4 Extension [4]
426 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the paired
extension’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for...")
4.4 Extension [4] Feature Guide 421 4.4.12 DSS Console—Flexible Key [4-3-2] Each flexible DSS button can be customized to access a certain feature. A maximum of 66 flexible DSS buttons can be customized for each DSS Console. Select the desired DSS Console from the DSS Console No./ Pair Extension list. Ty p e Specifies the feature to be assigned to the flexible DSS button. Parameter Selection (for Single CO) Specifies the CO line to be accessed. Parameter Selection (for Group CO) Specifies the CO line group to be accessed. DefaultNot Stored Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G- DN, Message Waiting, FWD/DND (Both), FWD/DND (External), FWD/DND (Internal), Group FWD (Both), Group FWD (External), Group FWD (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out, Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, Time Service - Automatic / Manual, Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1 Va lu e Ra n g e1–64 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy
4.4 Extension [4] 422 Feature Guide Parameter Selection (for Call Park) Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone. Parameter Selection (for Log-in/Log-out) Specifies which incoming call distribution groups that the paired extension belongs to are logged-in to or logged-out from. Parameter Selection (for Time Service) Selects which time modes are switched manually. Parameter Selection (for TRS Level Change) Specifies the TRS level to be used temporarily on a certain extension. DefaultAutomatic Va lu e Ra n g eAutomatic, Specific Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNone Va lu e Ra n g eNone: The incoming call distribution group is selected manually. All: All incoming call distribution groups that the paired extension belongs to. Incoming Group: A specified incoming call distribution group Feature Guide References Feature References 1.2.2.6 Log-in/Log-out 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultAll Va lu e Ra n g eAll (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night Feature Guide References Feature References 1.18.2 Flexible Buttons 2.2.4 Time Service Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1
4.4 Extension [4] Feature Guide 423 Parameter Selection (for Time Service - Automatic / Manual) Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic. Ext No. or Floating Ext No. (for DSS) Specifies the number of an extension to be accessed. Ext No. or Floating Ext No. (for G-DN) Specifies the floating extension number of an incoming call distribution group to be accessed. Va lu e Ra n g e1–7 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons 2.2.4 Time Service Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy
4.4 Extension [4] 424 Feature Guide Ext No. or Floating Ext No. (for Message Waiting) Specifies the number of an extension or floating extension number of an incoming call distribution group for which messages are checked. If this cell is left empty, the paired extension will check its own messages only. Ext No. or Floating Ext No. (for Group FWD (Both)) Specifies the floating extension number of an incoming call distribution group to which both intercom and CO line calls are forwarded. Ext No. or Floating Ext No. (for Group FWD (External)) Specifies the floating extension number of an incoming call distribution group to which CO line calls are forwarded. Ext No. or Floating Ext No. (for Group FWD (Internal)) Specifies the floating extension number of an incoming call distribution group to which intercom calls are forwarded. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9)
4.4 Extension [4] Feature Guide 425 Ext No. or Floating Ext No. (for Call Log) Specifies the paired extension’s number or the floating extension number of an incoming call distribution group for which call log information is displayed. If the cell is left empty, the paired extension will display its own call log information. Ext No. or Floating Ext No. (for Log-in/Log-out) Specifies the floating extension number of an incoming call distribution group to log-in to or log- out from. Ext No. or Floating Ext No. (for Hurry-up) Specifies the floating extension number of an incoming call distribution group for which Manual Queue Redirection is performed for the longest waiting call. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy
4.4 Extension [4] 426 Feature Guide Ext No. or Floating Ext No. (for Two-way Record) Specifies the floating extension number of the VM (DPT) group containing the paired extension’s mailbox. Ext No. or Floating Ext No. (for Two-way Transfer) Specifies the floating extension number of the VM (DPT) group containing the desired mailbox. Ext No. or Floating Ext No. (for Voice Mail Transfer) Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox. Dial (for One-touch) Specifies the number to be dialed. The PBX can have a maximum of 1000 One-touch Dialing buttons for extensions and DSS Consoles. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
4.4 Extension [4] Feature Guide 427 Optional parameter (or Ringing Tone Type Number) (for Time Service) Specifies the Time Table to be used for changing time modes in the Automatic Switching mode. Optional parameter (or Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, G-DN) Specifies the ring tone type. Optional parameter (or Ringing Tone Type Number) (for Call Park) Specifies the number of the parking zone a call is to be parked by pressing the Call Park button whose Parameter Selection on this screen is Specific. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Default1 Va lu e Ra n g e1–30 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g e0–99 Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy
4.4 Extension [4] 428 Feature Guide Extension Number of Mailbox (for Two-way Transfer) Specifies the number of the extension whose mailbox will be used to record conversations. (For example, a secretary records a conversation into the mailbox of a boss.) This setting establishes the One-touch Two-way Transfer button. If the cell is left empty, the paired extension user can specify the number of an extension each time. 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy The flexible DSS button settings of a DSS Console can be copied to different DSS Consoles. Select the DSS Console that has the setting to copy to other DSS Consoles from the DSS Console No./ Pair Extension list, then click Copy To. Destination DSS Console Select the number of the DSS Console and paired extension. Multiple DSS Consoles can be selected. To select all DSS Consoles at once, click Select All. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References Feature References None Programming References 4.4.12 DSS Console—Flexible Key [4-3-2]
4.5 Optional Device [5] Feature Guide 429 4.5 Optional Device [5] 4.5.1 Doorphone [5-1] The settings to establish doorphone calls can be programmed. Physical—Slot Indicates the slot position (reference only). Physical—Port Indicates the port number (reference only). Name Specifies the doorphone name. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Destination—Day, Lunch, Break, Night Specifies the destination number of doorphone calls for each port in each time mode. DefaultCurrent slot number Va lu e Ra n g eSlot number Feature Guide References Feature References 1.15.1 Doorphone Call Programming References 4.1.1 Slot [1-1] DefaultCurrent port number Va lu e Ra n g ePo r t n um b er Feature Guide References Feature References 1.15.1 Doorphone Call Programming References 4.1.1 Slot [1-1] DefaultNot stored. Va lu e Ra n g eMax. 20 characters Feature Guide References Feature References 1.15.1 Doorphone Call Programming References None DefaultNot stored.
4.5 Optional Device [5] 430 Feature Guide Tenant Number Specifies the tenant number for the doorphone port in order to apply the Time Table (day/lunch/ break/night). COS Specifies the Class of Service (COS) number. COS programming determines the doorphone ports that are able to make CO line calls, and sets restrictions on intercom calls from certain extensions (Internal Call Block). VM Trunk Group Number Specifies the number of the VPS trunk (CO line) group sent to the VPS when the doorphone call destination is the floating extension number of a VM (DPT) group. The VPS trunk (CO line) group number is used to send the applicable company greeting message of the VPS to the caller. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause]) Feature Guide References Feature References 1.15.1 Doorphone Call Programming References 4.2.8 Time Service—Week Table [2-5-1] Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.15.1 Doorphone Call Programming References None Default1 Va lu e Ra n g e1–64 Feature Guide References Feature References 1.1.2.2 Internal Call Block 1.15.1 Doorphone Call Programming References 4.2.14 Class of Service—COS Settings [2-7-1]—TRS / CO—TRS Level—Day, Lunch, Break, Night 4.2.16 Class of Service—Internal Call Block [2-7-3] Default1 Va lu e Ra n g e1–48