Panasonic Projector PT-RS11K User Manual

Chapter 6 Appendix — Technical information
ENGLISH - 201
Attention
 fIf a command is sent after the light source starts lighting, there may be a delay in response or the command may not be executed.  T ry 
sending or receiving any command after 60 seconds.
 f When transmitting multiple commands, be sure to wait until 0.5 seconds h\
as elapsed after receiving the response from the projector before 
sending the next command. When transmitting a command which does not need a parameter , a colon (:) is not...

Chapter 6 Appendix — Technical information
202 - ENGLISH
Control command
The following table lists the commands that can be used to control the p\
rojector using a computer.
 rProjector control command
Command Details Parameter/response 
string Remark (parameter)
PON Power on
―To check if the power is on, use the “Power query” command.
POF Power standby
QPW Power query 000
001 STANDBY
Power on
IIS Switching the input 
signal RG1
RGB1
RG2 RGB2
DVI DVI
- D
HD1 HDMI
DL1 DIGITAL LINK
SD1 SDI1
SD2 SDI2
OSH...

Chapter 6 Appendix — Technical information
ENGLISH - 203
 terminal
It is possible to control the projector remotely (by external contact) from a control panel located away from the 
projector where remote control signals cannot reach.
Use the  terminal on the connecting terminals of the projector to connect to the control panel.
Remote control Contact controlRemote control/contact control Standby Lit
Light source
RGB1 DIGITAL LINK
RGB2 HDMI
DVI-D
Installation locations in meeting rooms, etc. Remote...

Chapter 6 Appendix — Technical information
204 - ENGLISH
Two-window display combination list
l: P IN P (picture in picture) combination is possible
a: P IN P (picture in picture) combination is possible through the same frequency
―: P IN P (picture in picture) combination is not possible
Sub window
RGB1 RGB2
Main window Still image Movie
*1Y/C Video Still image Movie*1
RGB1 inputStill image signal
――――
ll
Movie signal*1― ―――
la
Y/C signal ――――
la
Video signal ――――
la
RGB2 input Still image signal
llll―...

Chapter 6 Appendix — Technical information
ENGLISH - 205
Control device password
To initialize your password, consult your distributor.
Upgrade Kit
If the optional Upgrade Kit (Model No.: ET-UK20) is applied, the following functions are extended.
FunctionStandard status When the Upgrade Kit is applied
Adjustment range of 
[VERTICAL KEYSTONE] Maximum of ±40°
*1Maximum of ±45°*1
Adjustment range of 
[HORIZONTAL KEYSTONE] Maximum of ±15°*1Maximum of ±40°*1
Adjustment range of 
[CURVED] Vertical arc, Maximum...

Chapter 6 Appendix — Technical information
206 - ENGLISH
List of compatible signals
The following table specifies the video signals compatible with the projector.
 fSymbols that indicate formats are as follows.
 gV

: VIDEO, Y/C
 gR: RGB
 gY

: YC
BCR/YPBPR
 gD: DVI - D
 gH: HDMI
 gS: SDI
Compatible signal Resolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
NTSC/NTSC4.43/
PAL - M/PAL60 720
  x   480i15.7 59.9 ―V― ― ―...

Chapter 6 Appendix — Technical information
ENGLISH - 207
Compatible signalResolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
1024 x 768 1   024   x   768
39.6 50.0 51.9 R/D/H ― ― ― ― ―
1   024   x   768
48.4 60.0 65.0 R/D/H
l―
l l l
1   024   x   768
56.5 70.1 75.0 R/D/H
l―
l l l
1   024   x   768
60.0 75.0 78.8 R/D/H
l―
l l l
1   024   x   76865.5 81.6 86.0 R/D/H ― ― ― ― ―
1
  024   x   76868.7 85.0 94.5 R/D/H ― ―...

Chapter 6 Appendix — Technical information
208 - ENGLISH
Compatible signalResolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
1920 x 1200 1   920   x   1   200
61.8 49.9 158.3 R/D/H ― ― ― ― ―
1   920   x   1   200*874.0 60.0 154.0 R/D/H
l―
l l*10l*10
1 920 x 1 200*974.6 59.9 193.3 R― ― ― ― ―
*1 Signals with a  l  in the Plug and play columns are signals described in EDID (extended display identification data) of the...

Chapter 6 Appendix — Technical information
ENGLISH - 209
List of 3D compatible signals
The following table specifies the 3D compatible video signals that the projector can project.
 fAbbreviations for input formats and 3D formats in the table have the following meanings.
 gFP: Frame packing format
 gSBS: Side by side format
 gTB: 

Top and bottom format
 gLBL: Line by line format
 gFS: Frame sequential format
 g3G: 3G

- SDI Level B simultaneous format
 gH

- D: HDMI & DVI - D input simultaneous format...

Chapter 6 Appendix — Technical information
210 - ENGLISH
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) HDMI
DVI - DHorizontal
(kHz)Vertical(Hz) FPSBS*1TB FSSBS*1TB LBL FS
1600
 
x
 
1200 1
 
600
 
x
 
1
 
200 75.0 60.0 162.0 ― ― ― ―
l― ― ―
1
 
600
 
x
 
1
 
200 61.8 49.9 131.5 ― ― ― ―
l― ― ―
1680
 
x
 
1050 1
 
680
 
x
 
1
 
050 65.3 60.0 146.3 ― ― ― ―
l― ― ―
1
 
680
 
x
 
1
 
050 54.1 50.0 119.5 ― ― ― ―
l― ― ―
1920
 
x
 
1080 1
 
920
 
x
 
1
 
080 55.6 49.9 141.5 ― ― ― ―...