Ricoh Aficio MP1600L User Manual

Timer Settings
43
2 Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
Auto Off.
The machine status after the Auto Off operation is referred to as Off mode
or Sleep mode. Use this setting to specify how long the machine remains
idle before...

System Settings
44
2
❖Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is 30 sec..
❖Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
The default setting is On.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting time is 60 sec..
❖Scanner Auto Reset Timer (scanner)
Specifies the time...

Interface Settings
45
2 Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Default settings are shown in bold type.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [IP Add.] and [Subnet M] as
xxx.xxx.xxx.xxx(x indicates a number)....

System Settings
46
2
❖IPv6 Stateless Setting
Specify IPv6 Stateless Setting.
The default setting is Active.
❖DNS Configuration
Make settings for the DNS server.
The default setting is Specify.
When you select [Specify], enter the DNS server IPv4 address as
xxx.xxx.xxx.xxx(x indicates a number).
The default settings of DNS server 1-2 are 000.000.000.000.
❖DDNS Configuration
Specify the DDNS settings.
The default setting is Active.
❖Domain Name
Specify the domain name.
The default setting is Specify.
❖WINS...

Interface Settings
47
2
❖SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
*+,/:;=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
❖SMB Work Group
Specify the SMB work group.
Enter the group name using up to 15 characters.
*+,/:;=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
❖Ethernet Speed
Set the access speed for networks.
Select a speed that...

System Settings
48
2
❖Host Name
Specify the host name.
Enter the host name using up to 63 characters.
❖Machine Name
Specify the machine name.
Enter the machine name using up to 31 characters.
Reference
p.4 “Accessing User Tools”
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings. [Parallel Interface] is displayed when this machine is installed with
the IEEE 1284 interface board.
❖Parallel Timing
Sets the timing for the control signal of the...

Interface Settings
49
2
IEEE 802.11b
This section describes various items of [IEEE 802.11b] under [Interface Settings].
This section describes the user tools in the IEEE 802.11b menu under Interface
Settings. [IEEE 802.11b] is displayed when this machine is installed with the wire-
less LAN interface board.
Be sure to make all settings simultaneously.
❖Communication Mode
Specifies the communication mode of the wireless LAN.
The default setting is 802.11 Ad hoc.
❖SSID Setting
Specifies SSID to distinguish...

System Settings
50
2
❖Restore Defaults
You can return the IEEE 802.11b (wireless LAN) settings to their defaults.
No 
Yes
Reference
p.4 “Accessing User Tools”
Print I/F Settings List
You can check items related to the network environment.
The configuration page shows the current network settings and network infor-
mation.
ASelect [System Settings] using {U} or {T}, and then press the {OK} key.
BSelect [Interface Settings] using {U} or {T}, and then press the {OK} key.
CSelect [Print I/F Settings List]...

File Transfer
51
2 File Transfer
This section describes the user tools in the File Transfer menu under System Set-
tings.
Default settings are shown in bold type.
❖Delivery Option
Enables or disables sending stored or scanned documents via the ScanRouter
delivery server.
The default setting is Off.
Specify this option when selecting whether or not to use the ScanRouter de-
livery software. If you do, you will have to preregister I/O devices in the
ScanRouter delivery software.
❖SMTP Server
Specify the...

System Settings
52
2
❖POP before SMTP
Specify POP authentication (POP before SMTP).
When sending e-mail via an SMTP server, you can enhance the level of SMTP
server security by connecting to the POP server for authentication.
To enable POP server authentication before sending e-mail via the SMTP
server, set [POP before SMTP] to [On]. E-mail is sent to the SMTP server after the
time specified for [Wait Time after Auth.] has elapsed.
If you select [On], enter server name in [Reception Protocol]. Also,...