Toshiba E740 Pocket Pc Instructions Manual

							 Bluetooth Settings Help 
Users Manual 9-8 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
 
Device Address This is the hexadecimal number for example, 
listed on Bluetooth™ as BDA:XX…X.  
■ You can delete all of the “ghost” devices from the remote device 
list by tapping Delete Ghost Device on the Tools menu. 
■ A maximum of 255 devices can be displayed on the remote device 
list. 
■ You can differentiate between devices with the same name on the 
remote device list by checking the device address. Tap and hold 
on the device name and then select Property from the pop-up 
menu to display the device address.  
						

							 Bluetooth Settings Help 
Users Manual 9-9 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
4 Tap and hold on the name of the device to which you want to 
connect. A pop-up menu will appear. 
 
5 Tap Service List on the pop-up menu to display a list of services for 
that device.  
No information will appear on the service list when the remote device 
has not been connected before. 
 
Once you have used this program to connect to a remote device, the 
service information for the previously connected device will be 
displayed in the service list. 
 Connected icon  
 Serial Port icon  
 Dial-up Networking icon  
						

							 Bluetooth Settings Help 
Users Manual 9-10 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
When a remote device has initiated the connection to the local device, the remote device status will appear as Connected on the remote device list 
but Not Connected in the service information. Once the Bluetooth™ 
device is connected via a serial port or Dial-up Network, the corresponding icon will change to a connected icon. A maximum of 30 
services can be displayed in the service information for a remote device. 
6 Tap Refresh to display the Authentication screen. 
If the remote device has already been authenticated, or if the Security 
Mode of both the local and remote devices is set to Security Off, the 
Authentication screen will not appear. Proceed to step 9. 
When the Security Mode of a device is set to On, a Bluetooth Passkey 
is used to allow other devices to connect to that device. This passkey, 
comprised of a maximum of 16 alphanumeric characters, is entered 
for both devices. Depending on the remote device, there may be fixed 
values or a character limit when entering the passkey. Please check 
the settings on the remote device first. 
 
■ Enter the Bluetooth Passkey within 20 seconds.  
The passkey must not exceed 16 alphanumeric characters. The 
default Bluetooth Passkey allows you to connect to other Toshiba 
Pocket PC Pocket PCs. 
7 Enter the Bluetooth Passkey on the local device and tap OK. 
The Authentication screen will now appear on the remote device. 
  
						

							 Bluetooth Settings Help 
Users Manual 9-11 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
8 The same passkey must be entered on the remote device. 
The remote device will be authenticated and the service list will be 
updated. 
 
9 Tap and hold on the name of the service to which you want to 
connect. A pop-up menu will appear. 
  
						

							 Bluetooth Settings Help 
Users Manual 9-12 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
10 Tap Connect on the pop-up menu. 
A connecting message will appear.  
Once a connection is established, the service icon will change to a 
connected icon. 
 
Tap OK to return to the Remote Device List screen. 
If security is enabled only on remote device, the Authentication screen will 
appear on the remote device first and then on the local device after the 
Bluetooth™ Passkey is entered. If auto-suspend is enabled in the Power 
Management, Toshiba Pocket PC will be turned off automatically after 
specific period of time and the Bluetooth™ connection is terminated. 
Connect to PC via ActiveSync 
Requirements: The PC must be Bluetooth™-enabled and ActiveSync 
must have been installed. Your Toshiba Pocket PC must also have been 
synchronized with the PC using a cradle or a cable at least once to 
establish a “partnership” to the PC. 
1 Connect your Toshiba Pocket PC to the computer to which you want 
to connect. 
Establish a Bluetooth™ connection to the PC by following the steps in 
“Bluetooth Connection”. 
2 Tap Start and then ActiveSync on your Toshiba Pocket PC. 
Tap Options on the Tools menu, check Enable synchronization 
when docked in cradle, using: W, and then select Bluetooth™. 
3 On the PC, select a port assigned to Bluetooth connection. 
The connection status on the right side of the screen will rotate with a 
green icon, indicating that the PC is ready to connect. 
  
						

							 Bluetooth Settings Help 
Users Manual 9-13 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
4 On your Toshiba Pocket PC, tap Start, Programs, and then 
Bluetooth Connection. 
The connection and authentication processes will begin. 
Bluetooth Connection changes the synchronization interface to Bluetooth automatically. If you want to use ActiveSync via USB interface 
after using Bluetooth Connection, please reset the ActiveSync interface 
to USB. 
Bluetooth as a serial connection 
To use Bluetooth™ as a serial connection, select COM4 Bluetooth as the 
modem on your Toshiba Pocket PC. 
Bluetooth™ Settings 
Changing the User Mode 
Check the local device setting and make any necessary changes. 
1 Tap Start, Programs, and then Bluetooth Setup to display the 
Bluetooth Settings screen. 
 
Tap W and select the desired User Mode. 
There are 2 states, “Waiting to connect” and “Connected” for the 
connection status. 
   
						

							 Bluetooth Settings Help 
Users Manual 9-14 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
2 Tap the Settings button. 
The Settings menu allows you to make advanced settings for the 
User Mode and display the local device information. 
 
3 Tap Change User Mode. 
 
You can select Office, Mobile, Home or Other for the User Mode. 
Selecting a User Mode immediately enables the corresponding 
settings. 
Tap OK or Cancel to return to the previous screen.  
						

							 Bluetooth Settings Help 
Users Manual 9-15 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
User Mode security settings 
The User Modes have been programmed with the following Security 
Modes. 
User Mode  Security Mode 
Office On 
Mobile On 
Home Off 
Other On  
Because Bluetooth is a wireless network, and unknown devices can 
connect to the local device, you can restrict remote access to your 
device. 
■ To change the Security Mode setting, refer to step 5 of “Changing the 
User Mode.” 
■ If the Security Mode of the local device is On, the authentication will 
be performed when establishing a connection between remote and 
local devices 
■ Tap on the desired User Mode on the Change User Mode screen. 
The settings for the selected User Mode will be enabled. 
1 Tap Advanced Settings to display the User Mode Properties 
screen. You can modify each User Mode setting. 
 
Set the Discovery Mode (Non-discoverable Mode or General 
Discoverable Mode).  
						

							 Bluetooth Settings Help 
Users Manual 9-16 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Set the Connectability Mode (Non-connectable Mode or Connectable 
Mode). 
Set the Security Mode (Security Off or Security On). 
■ When using the Security On mode, you can check Enable 
Encryption to encrypt all data sent and received. 
2 Tap OK to return to the Change User Mode screen and enable the 
new User Mode settings. 
Displaying the local device information 
1 Tap Local Device Property button from the Settings screen. 
The Local Device Property screen will appear. 
 
When setting or changing the device name on the Local Device 
Property screen, enter a name that does not exceed 17 characters. 
You cannot change the settings for items other than Device Name. 
2 Tap OK to return to the Settings menu and enable the new Device 
Name setting.  
						

							 Bluetooth Settings Help 
Users Manual 9-17 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Disconnecting/Exiting Bluetooth™ Connection 
If you turn off the power of your Toshiba Pocket PC without first 
disconnecting the Bluetooth connection, the following error message may 
appear the next time you turn on the power of the Toshiba Pocket PC: 
“An error has occurred with Bluetooth, either because the power has 
been turned off or because the device has been disabled. Confirm that 
the card is working properly.” 
1 In such a case, please tap OK. 
Tap Remote Devices on the BluetoothSettings screen. 
Remote devices will be searched. 
To disconnect a connection established from local device, proceed to 
step 2 below. To disconnect a connection established from remote 
device, first change the device attribute setting to local device and 
then proceed to step 2 below.