Home > Canon > Printer > Canon printer imageCLASS D1180 User Manual

Canon printer imageCLASS D1180 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer imageCLASS D1180 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Copying 
    3-24
    2-Sided Copying
    2-Sided Copying
    This mode enables you to make 2-sided copies from 1-sided or 2-sided originals, or make 1-
    sided copies from 2-sided originals. This enables you to cut print costs in half when copying 
    in large quantities. This feature can be used together with both “Collating Copies”
     (see p. 3-
    19) and “2 on 1 Combination”
     (see p. 3-21). The default setting is .
    Paper used to make 2-sided copies must conform to the following specifications: Paper size: LTR, A4 and LGL (envelopes cannot be used for 2-sided copying)
    Paper weight: 16 to 32 lb (60 to 120 g/m
    2)
    Make sure to close the sub-output tray before making 2-sided copies.
    Do not open the sub-output tray while making 2-sided copies.
    When making 2-sided copies, make sure to confirm that the paper size switch lever on the rear side of the machine is set 
    to the appropriate position. Paper jams may occur if the lever is not set appropriately. For details on how to set the paper 
    size switch lever, see “Setting the Paper Size Switch Lever,
    ” on p. 2-16.
    –
    •
    •
    –
    –
    – 
    						
    							Copying 
    3-25
    2-Sided Copying
    1 to 2-Sided Copying
    You can make 2-sided copies from 1-sided 
    documents.
    1 
    Place documents.
    For details, see “Placing Documents,” on p. 2-4.
    2 
    Press  [COPY ].
    3 
    Press  [2-Sided] repeatedly to select 2-SIDED>, then press [OK].
    1   >   2 - S I D E D
    If there are odd number of documents when the 
    1-Sided to 2-Sided mode is used, the back side of 
    the last copy is left blank.
    4 
    Press  or  to select  
    or , then press [OK].
            B O O K   T Y P E T Y P E   O F   O U T P U T
    : The front and back sides of the 
    copy will have the same top-bottom 
    orientation.
    : The front and back sides 
    of the copy will have the opposite top-
    bottom orientation.
    For the landscape oriented documents:  
    When  is selected, the front and 
    back sides of the copy will have the opposite top-
    bottom orientation. When  is 
    selected, the front and back sides of the copy will 
    have the same top-bottom orientation.
    5 
    Use   –  [numeric keys] to enter the 
    desired copy quantity (1 to 99).
                T E X T / P H O T O 1 0 0 %   *             L T R0 1
    6 
    Press  [Start].
    If you want to copy multiple documents using 
    the platen glass, place a document and press 
     [Start] once for each page. When scanning is 
    complete, press [OK].
    To cancel all settings, press  [Stop/Reset].
    When you switch the mode by pressing the 
    mode keys such as 
     [SEND/FAX]/ [FAX], all settings will be also canceled. If 
    you want to keep the settings, store the settings 
    as follows:  
     [Menu] →  →  →  (See “COPY SETTINGS,” 
    on p
    . 13-5.)
    You can skip step 4. In this case, the machine 
    scans 1-sided documents to make 2-sided, 
     copies.
    –
    –
    –
    –
    – 
    						
    							Copying 
    3-26
    2-Sided Copying
    2 to 2-Sided Copying
    You can make 2-sided copies from 2-sided 
    documents.
    1 
    Place documents in the ADF.
    For details, see “Placing Documents,” on p. 2-4.
    2 
    Press  [COPY ].
    3 
    Press  [2-Sided] repeatedly to select 
     2-SIDED>, then press [OK].
    2   >   2 - S I D E D
    4 
    Press  or  to select  
    or  for the document 
    layout, then press [OK].
            B O O K   T Y P E T Y P E   O F   O R I G I N A L
    : The front and back sides of the 
    document will have the same top-bottom 
    orientation.
    : The front and back sides 
    of the document will have the opposite top-
    bottom orientation.
    –
    –
    5 
     
    Press  or  to select  
    or  for the output 
    layout, then press [OK].
            B O O K   T Y P E T Y P E   O F   O U T P U T
    : The front and back sides of the 
    copy will have the same top-bottom 
    orientation.
    : The front and back sides 
    of the copy will have the opposite top-
    bottom orientation.
    6 
    Use   –  [numeric keys] to enter the 
    desired copy quantity (1 to 99).
                T E X T / P H O T O 1 0 0 %   *             L T R0 1
    7 
    Press  [Start].
    To cancel all settings, press  [Stop/Reset].
    When you switch the mode by pressing the 
    mode keys such as 
     [SEND/FAX]/ [FAX], all settings will be also canceled. If 
    you want to keep the settings, store the settings 
    as follows: 
     [Menu] →  →  →  (See “COPY SETTINGS,” 
    on p
    . 13-5.)
    You can skip steps 4 and 5. In this case, the 
    machine scans 2-sided documents in the 
     orientation and outputs the 
    same way.
    If you press 
     [Start] in step 4 after selecting 
    , the machine scans 2-sided 
    documents in the  
    orientation and outputs the same way.
    –
    –
    –
    –
    –
    – 
    						
    							Copying 
    3-27
    2-Sided Copying
    2 to 1-Sided Copying
    You can make 1-sided copies from 2-sided 
    documents.
    1 
    Place documents in the ADF.
    For details, see “Placing Documents,” on p. 2-4.
    2 
    Press  [COPY ].
    3 
    Press  [2-Sided] repeatedly to select 
    1-SIDED>, then press [OK].
    2   >   1 - S I D E D
    4 
    Press  or  to select  
    or , then press [OK].
            B O O K   T Y P E T Y P E   O F   O R I G I N A L
    : The front and back sides of the 
    document will have the same top-bottom 
    orientation.
    : The front and back sides 
    of the document will have the opposite top-
    bottom orientation.
    –
    –
    5 
    Use  
    –  [numeric keys] to enter the 
    desired copy quantity (1 to 99).
                T E X T / P H O T O 1 0 0 %   *             L T R0 1
    6 
    Press  [Start].
    You can skip step 4. In this case, the machine 
    scans 2-sided documents in the  
    orientation to make 1-sided copies.
    To cancel all settings, press  [Stop/Reset].
    When you switch the mode by pressing the 
    mode keys such as 
     [SEND/FAX]/ [FAX], all settings will be also canceled. If 
    you want to keep the settings, store the settings 
    as follows: 
     [Menu] →  →  →  (See “COPY SETTINGS,” 
    on p
    . 13-5.)
    –
    – 
    						
    							Copying 
    3-28
    Adjusting Sharpness
    Adjusting Sharpness
    You can set the sharpness of the copied image. The default setting is .
    1 
    Place documents.
    For details, see “Placing Documents,” on p. 2-4.
    2 
    Press  [Menu].
    3 
    Press  or  to select , then press [OK].
      3 . C O P Y   S E T T I N G S M E N U
    4 
    Press  or  to select , 
    then press [OK].
      2 . S H A R P N E S S C O P Y   S E T T I N G S 3
    5 
    Press  or  to select to adjust the 
    sharpness (1 to 9), then press [OK].
                                5 S H A R P N E S S
    The highest sharpness level is 9 and the lowest 
    is 1. To copy text or lines clearly, select a high 
    sharpness level. To copy documents containing 
    printed images or other halftones, select a low 
    sharpness level.
    6 
    Press  [Stop/Reset] to return to the 
    standby mode.
    7 
    Press  [COPY ].
    8 
    Use   –  (numeric keys) to enter the 
    desired copy quantity (1 to 99).
                T E X T / P H O T O 1 0 0 %                 L T R0 1
    9 
    Press  [Start].
    If you want to copy multiple documents using 
    the platen glass, place a document and press 
     
    [Start] once for each page. 
    						
    							Copying 
    3-29
    Selecting Paper Size Group
    Selecting Paper Size Group
    This section describes how to select the paper size group. The default setting is .
    1 
    Press  [Menu].
    2 
    Press  or  to select , then press [OK].
      3 . C O P Y   S E T T I N G S M E N U
    3 
    Press  or  to select , then press [OK].
      3 . P A P E R   S I Z E   G R O U P C O P Y   S E T T I N G S
    4 
    Press  or  to select a paper size 
    group, then press [OK].
                                I N C H E S P A P E R   S I Z E   G R O U P
    You can select from the following paper size 
    groups: , , 
    5 
    Press  [Stop/Reset] to return to the 
    standby mode. 
    						
    							Copying 
    3-30
    Changing Standard Mode
    Changing Standard Mode
    The Standard mode is the combination of copy modes that the machine automatically 
    applies when the power is turned ON, or when 
     [Stop/Reset] is pressed. You can change 
    the Standard mode to suit your needs. The default settings are as follows:
    : 
    :  (5)
    :  (100%)
    : 
    : 
    : 
    : 
    –
    –
    –
    –
    –
    –
    –
    1 
    Press  [Menu].
    2 
    Press  or  to select , then press [OK].
      3 . C O P Y   S E T T I N G S M E N U
    3 
    Press  or  to select , then press [OK].
      1 . S T A N D A R D   S E T T I N G S C O P Y   S E T T I N G S
    4 
    Press  or  to select the desired 
    setting item, then press [OK].
      1 . I M A G E   Q U A L I T Y S T A N D A R D   S E T T I N G S
    You can specify the following settings:  
    , , , , , , 
    
    If you press  [Stop/Reset] before pressing [OK], 
    the setting will not be registered.
    5 
    Press  [Stop/Reset] to return to the 
    standby mode. 
    						
    							Copying 
    3-31
    Initializing the Standard Mode
    Initializing the Standard Mode
    This section describes how to initialize the current copy setting mode including standard 
    mode.
    1 
    Press  [Menu].
    2 
    Press  or  to select , then press [OK].
      3 . C O P Y   S E T T I N G S M E N U
    3 
    Press  or  to select , then press [OK].
      4 . I N I T .   C O P Y   S E T . C O P Y   S E T T I N G S
    4 
    Press  to select .
    <   Y E S                       N O   > O K   T O   I N I T I A L I Z E ?
    5 
    Press  [Stop/Reset] to return to the 
    standby mode. 
    						
    							Copying 
    3-32
    Printing a Sample Page
    Printing a Sample Page
    This machine provides you to print a sample page. You can use this function to test how the 
    printouts will look with current settings.
    The paper size must be LTR.
    The paper type must be Plain Paper (16 to 21 lb (60 to 80 g/m2)).
    Make sure that the paper setting is appropriate and the paper is loaded correctly. No error message is displayed, even if 
    the sample page is not printed correctly.
    You cannot cancel printing a sample page once printing has started.
    You cannot use this function while making copies, scanning documents, or printing reports/lists.
    –
    –
    –
    –
    –
    1 
    Press  [COPY ].
    2 
    Press and hold [OK].
    The sample page will be printed on both sides 
    of the paper. 
    						
    							Printing 
    4
    Printing 
    This chapter describes the basic print features.
    Overview of the Print Functions ................................. 4-2
    Introduction to Using Print Functions  ....................... 4-4
    Printing Documents from a Computer....................... 4-5
    Scaling Documents  ...................................................... 4-7
    Printing Multiple Pages on One Sheet  ....................... 4-9
    2-Sided Printing  .........................................................4-11
    Checking and Canceling Print Jobs  ..........................4-12   
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer imageCLASS D1180 User Manual