Canon printer PIXMA MG6620 User Manual

							IPv4 default gatewayXXX. XXX. XXX. XXXIPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix lengthXXXIPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXMAC addressXX:XX:XX:XX:XX:XXIPsec settingsDisablePre-shared keyXXXXXXXXXXXXXXXXPrinter nameXXXXXXXXXXXXXXXBonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
◦
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Printing Out Network Setting Information
Important
•
This printout contains valuable information about your computer. Handle it with care.
•
Other settings
Important
•
You cannot select the items below when  Disable LAN is selected for  Change LAN.
◦
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
•
You cannot change this setting with the memory card inserted in the card slot.
•
You cannot use the same printer name as that already used for other LAN connected devices.
•
You cannot use a hyphen for the initial or last character of the printer name.
◦
TCP/IP settings
Performs IPv4 or IPv6 setting.
◦
Set memory card sharing
Selects whether to share the card slot with a LAN connected computer.
241 
						

							Note•
You cannot change this setting with the memory card inserted in the card slot.
◦
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1,
Windows 8, Windows 7, and Windows Vista).
Enable/disable WSD Selects whether WSD is enabled or disabled.
Note
•
When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows
8.1, Windows 8, Windows 7 and Windows Vista.
WSD scan from this device Selecting  Enable allows you to transfer the scanned data to the computer using WSD.
Timeout setting Specifies the timeout length.
◦
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enable/disable Bonjour Selecting  Enable allows you to use Bonjour to perform the network settings.
Service name Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
•
You cannot use the same service name as that already used for other LAN connected devices.
◦
LPR protocol setting
Activates/deactivates the LPR setting.
◦
PictBridge communication
Setting items for printing from a PictBridge (Wireless LAN) compliant device. Enable/disable communication Selecting  Enable allows you to print from a PictBridge (Wireless LAN) compliant device.
Timeout setting Specifies the timeout length.
◦
Wireless LAN DRX setting
Selecting  Enable allows you to activate discontinuous reception when using wireless LAN. It allows
you to save electricity.
Note
•
Depending on the access point you are using, discontinuous reception may not be activated even though  Enable is selected.
•
Discontinuous reception is activated only while the machine is on standby. (The touch screen is
in the screen saver mode.)
242 
						

							◦Access point mode settings
When you use the machine as an access point, specify the access point name and the security
setting.
Using the Machine with the Access Point Mode
243 
						

							Device user settings•
Date display format
Changes the display format of dates when printed.
Note
•
When  ON is selected for  Print date on the print settings screen in printing from a memory card, the
date is printed in the date display format you selected.
Setting Items for Photo Printing Using the Operation Panel of the Machine
•
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
•
Remove the memory card before changing this setting.
Setting Up the Card Slot as the Memory Card Drive of the Computer
•
If you set this setting to  Writable from USB PC or Writable from LAN PC , you cannot print photos
on a memory card using the operation panel of the machine. After you finish operation of the memory card dedicated drive, be sure to set it back to  Not writable from PC. When you turn off the
machine,  Writable from USB PC  or Writable from LAN PC  will be canceled and the setting is
returned to  Not writable from PC  when you turn on the machine next time.
•
When Writable from USB PC  or Writable from LAN PC  is selected, the auto power off setting is
inactive.
For details on the auto power off setting:
About ECO settings
•
Sound control
Selects the volume.
◦
Keypad volume
Selects the beep volume when tapping the touch screen or the buttons on the operation panel.
◦
Alarm volume
Selects the alarm volume.
•
Device info sending setting
Selects whether you will send the printer usage information to Canon server. The information sent to
Canon will be utilized to develop better products. Select  Agree to send the printer usage information to
Canon server.
244 
						

							PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on a PictBridge (Wireless LAN) Compliant Device
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper size to Default  on
the PictBridge (Wireless LAN) compliant device.
2.
Type  (Media type)
Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper type to Default  on
the PictBridge (Wireless LAN) compliant device.
3.
Print qlty  (Print quality)
Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device.
4.
Border  (Bordered/Borderless print)
Select the bordered/borderless layout.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Layout to Default  on the
PictBridge (Wireless LAN) compliant device.
245 
						

							5.Photo fixWhen  Auto photo fix  is selected, the scene or person's face of a shot photo is recognized and the most
suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene
with the most suitable color, brightness, or contrasts automatically to print.
Note
•
As a default, photos on a PictBridge (Wireless LAN) compliant device are printed with auto
correction applied.
•
If  No correction  is selected, photos are printed without correction.
6.
Red-EyeCorrection
Select  ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.
7.
Tap to specify the print settings.
246 
						

							Language selectionChanges the language for the messages and menus on the touch screen.247 
						

							Home screen background colorSelects the background color of the HOME screen. You can select black or white.248 
						

							Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note
•
Only  Check current version  is available when Disable LAN is selected for  Change LAN in LAN
settings .
•
Install update
Performs the firmware update of the machine. If you select  Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Important
•
When you use this function, make sure that the machine is connected to the Internet.
Note
•
If the firmware update is not complete, check the following and take an appropriate action.
•
Check the network settings such as an access point or a router.
•
If  Cannot connect to the server.  is displayed on the touch screen, tap  OK, then try again after
a while.
•
Check current version
You can check the current firmware version.
•
Update notification setting When  Yes is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the touch screen.
•
DNS server setup
Performs settings for a DNS server. Select  Auto setup or Manual setup . If you select Manual setup ,
follow the display on the touch screen to perform settings.
•
Proxy server setup
Performs settings for a proxy server. Follow the display on the touch screen to perform settings.
249 
						

							Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Setting for Printing
•
Register cassette paper info
Registers the paper size and the media type you load in the cassette.
Note
•
When you register the paper size and the media type, the screen to select whether you apply the settings to those for copying is displayed. Select  Yes to apply the registered settings to copying.
•
For details on the proper combination of paper settings you can specify by the printer driver or on
the touch screen:
Setting the Media Type with the Printer Driver and on the Printer
Setting the Paper Size with the Printer Driver and on the Printer
•
Detect paper setting mismatch
If you select  Yes, the machine detects whether the paper size and the media type are identical with
those registered in  Register cassette paper info . If printing starts with the settings that do not match,
an error message is displayed on the touch screen.
Note
•
When  No is selected,  Register cassette paper info  or Detect cassette reinsertion  is disabled.
•
Detect cassette reinsertion
If you select  Yes, the machine detects the cassette is reinserted. When the  Register cassette paper
info  screen is displayed, register the paper size and the media type.
250