Canon printer PIXMA MG6620 User Manual

							About Special Copy MenuThe following menus are selectable in the  Advanced print menu to copy originals.Borderless copy You can copy images so that they fill the entire page without borders.
Copying without Borders
Frame erase copy When copying thick originals such as books, you can make a copy without black margins around the
image and gutter shadows.
Copying Thick Originals Such as Books
Photo copy You can copy all photos you scanned.
Copying Photos541 
						

							Copying Thick Originals Such as BooksWhen copying thick originals such as books, you can make a copy without black margins around the imageand gutter shadows. Using this function, you can reduce unnecessary ink consumption.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Flick the HOME screen, then tap   Advanced print .
Using the Operation Panel
4.
Tap Frame erase copy .
5.
Load the original document on the platen glass.
6.
Specify the settings as necessary.
Tap  Copies  to display the screen to specify the number of copies.
For the setting items other than  Copies:
Setting Items for Copying
Note
•
When the Copy standby screen is displayed, tapping  allows you to preview an image of the
printout on the preview screen.
Displaying the Preview Screen
7.
Press the  Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Note
•
Close the document cover.
•
There may be a narrow black margin that appears around the image. This function removes the dark margins only. If a scanned book is too thin or when the machine is used near a window or in a bright
environment, a faint black frame may remain. Also, if the color of an original is dark, the machine cannot
distinguish the document color from the shadow and this may cause slight cropping or a shadow on the
crease.
542 
						

							Copying without BordersYou can copy images on photo paper so that they fill the entire page without borders.1.
Make sure that the machine is turned on.
2.
Load the photo paper.
3.
Flick the HOME screen, then tap   Advanced print .
Using the Operation Panel
4.
Tap Borderless copy .
5.
Load the original on the platen glass.
6.
Specify the settings as necessary.
Tap  Copies  to display the screen to specify the number of copies.
For the setting items other than  Copies:
Setting Items for Copying
7.
Press the  Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Note
•
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed. However, the
cropped area will be larger if the extension amount is large.
For details:
Extended copy amount
•
For details on the paper size and the media type available for borderless copying:
Printing Area
543 
						

							Copying PhotosYou can scan printed photos and print them all at one time.1.
Make sure that the machine is turned on.
2.
Load the photo paper.
3.
Flick the HOME screen, then tap   Advanced print .
Using the Operation Panel
4.
Tap Photo copy .
5.
Confirm the on-screen instructions, then tap  OK.
6.
Load the printed photo on the platen glass following the on-screen instructions, then tap
OK .
Note
•
For details on loading photos on the platen glass:
Loading Originals
When scanning is complete, the print settings confirmation screen is displayed.
7.
Specify the settings as necessary.
Flick to display setting items, then tap the setting item to display the settings. Tap to specify the setting.
544 
						

							Note•
Depending on the setting item, some settings cannot be specified in combination with the settingof other setting items. If the setting cannot be specified in combination is selected, 
 and  Error
details  are displayed on the touch screen. In this case, tap 
 on the upper left on the touch
screen to confirm the message, then change the setting.
1.
Copies
Specifies the number of copies.
2.
Page size
Select the page size of the loaded paper.
3.
Type  (Media type)
Select the media type of the loaded paper.
4.
Print qlty  (Print quality)
Select print quality according to the original.
5.
Border  (Bordered/Borderless print)
Select bordered or borderless print.
6.
Photo fix
Select  No correction , Auto photo fix , or Fade restoration .
Note
•
When No correction  is selected, the machine prints the scanned image without correction.
•
When Auto photo fix  is selected, the machine corrects the scanned image automatically.
•
When Fade restoration  is selected, the machine corrects the scanned image that have faded
over time.
7.
By tapping, you can preview an image of the printout on the preview screen. Flick the photo to change the display.
Note
•
If  appears on the photo, the printed photo may not be scanned properly. Rescan the printed
photo.
8.
Press the  Color button for color printing, or the  Black button for black & white printing.
The machine starts printing.
Note
•
If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By tapping  Yes, the machine starts printing. If you rescan the photo, tap  No
and scan the photo again.
545 
						

							Copying Two Pages to Fit onto a Single PageWhen you select  2-on-1 copy for Layout  in Copy , you can copy two original pages onto a single sheet of
paper by reducing each image.
Tap  Settings  on the Copy standby screen to display the print settings screen, then select  2-on-1 copy for
Layout .
Select 2-on-1 copy , then tap OK.
If you tap  Advanced  with 2-on-1 copy  selected, you can specify the orientation and the order of the
original.
•
When you select  Orientation: Portrait  and Left to right :
•
When you select  Orientation: Portrait  and Right to left :
•
When you select  Orientation: Landscape  and Top to bottom :
•
When you select  Orientation: Landscape  and Bottom to top :
After selecting the order, you can select whether you use the preview screen. If you tap  ON, the preview
screen is displayed so that you can check the orientation.
Note
•
If  Device memory is full. Cannot continue process.  appears on the touch screen when scanning, set
the print quality to  Standard, then try copying again. If the problem is not resolved, set the print quality
to  Draft  and try copying again.
•
This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy four original pages on one sheet of paper. In this
case, two original pages are copied on each side of paper.
546 
						

							If you use this function in combination, select 2-sided for 2-sidedPrintSetting , then select the
orientation and the stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
When checking the orientation: When you are using the preview screen, the screen below is displayed before copying starts so that youcan check the orientation.
A.
Tap to rotate the original by 180 degrees.
B.
Tap to start scanning the original.
C.
Tap to rescan the original.
When scanning is finished: The screen below appears after scanning the first sheet of original.
A.
Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen glass, then tap  Scan.
B.
Tap to start copying the original already scanned.
Note
•
You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
547 
						

							•If you use this function in combination with Two-sided copy, the screen above is displayed afterscanning the second sheet of original is complete. Follow the on-screen instructions to scan the third
and fourth sheet of original.
548 
						

							Copying Four Pages to Fit onto a Single PageWhen you select  4-on-1 copy for Layout  in Copy , you can copy four original pages onto a single sheet of
paper by reducing each image. Four different layouts are available.
Select  4-on-1 copy , then tap OK.
If you tap  Advanced  with 4-on-1 copy  selected, you can specify the orientation and the order of the
original.
Note
•
The order is the same regardless of the orientation.
•
When you select  Upper-left to right
•
When you select Upper-right to left
o
•
When you select Upper-left to bottom
•
When you select Upper-right to bottom
549 
						

							After selecting the order, you can select whether you use the preview screen. If you tap ON, the preview
screen is displayed so that you can check the orientation.
Note
•
If  Device memory is full. Cannot continue process.  appears on the touch screen when scanning, set
the print quality to  Standard, then try copying again. If the problem is not resolved, set the print quality
to  Draft  and try copying again.
•
This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy eight original pages on one sheet of paper. In this
case, four original pages are copied on each side of paper.
If you use this function in combination, select  2-sided for 2-sidedPrintSetting , then select the
orientation and the stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
When checking the orientation: When you are using the preview screen, the screen below is displayed before copying starts so that youcan check the orientation.
A.
Tap to rotate the original by 180 degrees.
B.
Tap to start scanning the original.
C.
Tap to rescan the original.
When scanning is finished: The screen below appears after scanning each sheet of original.
A.
Tap to start scanning the original.
550