Canon printer PIXMA MX490 User Manual

							The IJ Scan Utility main screen appears.
Note
•
Refer to the following pages for details on the setting items in the Settings dialog box.
Settings (Document Scan) Dialog Box
Settings (Photo Scan) Dialog Box
Settings (Custom Scan) Dialog Box
7.
Click Custom .
Multiple items are scanned at one time.
Note
•
Click Cancel  to cancel the scan.
•
Scanned images are saved in the folder set for  Save in in the corresponding Settings dialog box
displayed by clicking  Settings.... In each Settings dialog box, you can also make advanced scan
settings.
491 
						

							Scanning Multiple Documents at One Time from the ADF (Auto
Document Feeder)
Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.
Note
•
You can scan multiple documents at one time from the ADF when scanning via  Auto, Document ,
Custom , or ScanGear .
Refer to "Scanning with Application Software that You are Using (ScanGear)" for your model from
Home of the  Online Manual  for how to scan using ScanGear (scanner driver).
Using Auto Scan: The item type is detected automatically. Click  Auto in the IJ Scan Utility main screen and scan.
Easy Scanning with Auto Scan
Not Using Auto Scan:
In the Settings dialog box, set  Select Source to ADF or Auto, and scan.
Note
•
The screens for scanning documents are used as examples in the following descriptions.
1.
Place the documents on the ADF.
Placing Documents (ADF (Auto Document Feeder))
2.
Start IJ Scan Utility.
3.
Click  Settings... .
The Settings dialog box appears.
4.
Click Document Scan .
492 
						

							5.
Select Select Source  according to the documents to be scanned.
To scan only the front side of each document, select  Document (ADF/Platen) or Document (ADF
Simplex) .
To scan the front side then the back side of each document, select  Document (ADF Manual Duplex).
6.
Set the color mode, document size, and scanning resolution as required.
Click  Document Scan Orientation Settings...  to specify the orientation of the documents to be
scanned. In the displayed dialog box, you can specify the  Orientation and Binding Side . How to place
the documents when scanning the back sides depends on the  Binding Side.
When setting is completed, click  OK.
493 
						

							The IJ Scan Utility main screen appears.
Note
•
Refer to the following pages for details on the setting items in the Settings dialog box.
Settings (Document Scan) Dialog Box
Settings (Custom Scan) Dialog Box
7.
Click Document .
Scanning starts.
Note
•
Click Cancel  to cancel the scan.
When  Document (ADF Manual Duplex)  is selected for Select Source, proceed to Step 8.
8.
Follow the on-screen instructions to place the documents.
Note
•
The screens for scanning with  Orientation set to Portrait  are used as examples in the following
descriptions.
494 
						

							When Long edge is Selected for Binding Side in Document Scan Orientation Settings...:Place the documents after rotating the output documents 180 degrees.
When Short edge is Selected for Binding Side in Document Scan Orientation Settings...:
Place the documents without changing the orientation of the output documents.
9.
Click  OK.
Scanning starts.
Note
•
Click  Cancel  to cancel the scan.
•
Scanned images are saved in the folder set for  Save in in the corresponding Settings dialog box
displayed by clicking  Settings.... In each Settings dialog box, you can also make advanced scan
settings.
495 
						

							Saving after Checking Scan ResultsYou can check the scan results, then save the images to a computer.
Important
•
You cannot check the scan results before saving when scanned using  Auto scan or the operation
panel.
Note
•
The screens for scanning photos are used as examples in the following descriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box  appears.
3.
Click Photo Scan .
4.
Select the Check scan results  checkbox, then click  OK.
496 
						

							The IJ Scan Utility main screen appears.
Note
•
Refer to the following pages for details on the setting items in the Settings dialog box.
Settings (Document Scan) Dialog Box
Settings (Photo Scan) Dialog Box
Settings (Custom Scan) Dialog Box
Settings (Scan and Stitch) Dialog Box
Settings (ScanGear) Dialog Box
5.
Click Photo .
Scanning starts.
When scanning is completed, the  Save Settings dialog box appears.
Note
•
Click Cancel  to cancel the scan.
6.
Change the image order or file save options as required.
You can change the image order or file save options in the 
Save Settings dialog box .
497 
						

							Note•
The default save folders are as follows.
•
Windows 8.1: Documents folder
•
Windows 8:  My Documents  folder
•
Windows 7: My Documents  folder
•
Windows Vista:  Documents folder
•
Windows XP:  My Documents  folder
7.
Click OK.
Scanned images are saved according to the settings.
498 
						

							Sending Scanned Images via E-mailYou can send scanned images via e-mail.
Note
•
The screens for scanning photos are used as examples in the following descriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box  appears.
3.
Click Photo Scan .
4.
Select Attach to e-mail  in Application Settings , then select an e-mail client.
499 
						

							Note
•
You can add e-mail clients to use for attachments from the pull-down menu.
•
If None (Attach Manually)  is selected, manually attach scanned and saved images to e-mail.
5.
Click OK.
The IJ Scan Utility main screen appears.
Note
•
Refer to the following pages for details on the setting items in the Settings dialog box.
Settings (Auto Scan) Dialog Box
Settings (Document Scan) Dialog Box
500