HP 5500 Ei 5500 Si Switch Series Configuration Guide
Have a look at the manual HP 5500 Ei 5500 Si Switch Series Configuration Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 1527
391
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM multicast routing table information on Switch E.
[SwitchE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry...](http://img.usermanuals.tech/thumb/36/58909/w64_hp-5500-ei-5500-si-switch-series-configuration-guide-1526.png "Page 1527
391
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM multicast routing table information on Switch E.
[SwitchE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry...")
![Page 1529
393
2.
Enable IPv6 multicast routing and IPv6 administra tive scoping, and enable IPv6 PIM-SM and MLD:
# Enable IPv6 multicast routing and administrative scoping on Switch A, enable IPv6 PIM-SM on
each interface, and enable MLD on the host-side interface VLAN-interface 100.
system-view
[SwitchA] multicast ipv6 routing-enable
[SwitchA] pim ipv6
[SwitchA-pim6] c-bsr admin-scope
[SwitchA-pim6] quit
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] mld enable...](http://img.usermanuals.tech/thumb/36/58909/w64_hp-5500-ei-5500-si-switch-series-configuration-guide-1528.png "Page 1529
393
2.
Enable IPv6 multicast routing and IPv6 administra tive scoping, and enable IPv6 PIM-SM and MLD:
# Enable IPv6 multicast routing and administrative scoping on Switch A, enable IPv6 PIM-SM on
each interface, and enable MLD on the host-side interface VLAN-interface 100.
system-view
[SwitchA] multicast ipv6 routing-enable
[SwitchA] pim ipv6
[SwitchA-pim6] c-bsr admin-scope
[SwitchA-pim6] quit
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] mld enable...")
![Page 1530
394
# On Switch C, configure VLAN-interface 103 and VLAN-interface 106 to be the boundary of
admin-scope zone 2.
system-view
[SwitchC] interface vlan-interface 103
[SwitchC-Vlan-interface103] multicast ipv6 boundary scope 4
[SwitchC-Vlan-interface103] quit
[SwitchC] interface vlan-interface 106
[SwitchC-Vlan-interface106] multicast ipv6 boundary scope 4
[SwitchC-Vlan-interface106] quit
# On Switch D, configure VLAN-interface 107 to be the boundary of admin-scope zone 2.
system-view...](http://img.usermanuals.tech/thumb/36/58909/w64_hp-5500-ei-5500-si-switch-series-configuration-guide-1529.png "Page 1530
394
# On Switch C, configure VLAN-interface 103 and VLAN-interface 106 to be the boundary of
admin-scope zone 2.
system-view
[SwitchC] interface vlan-interface 103
[SwitchC-Vlan-interface103] multicast ipv6 boundary scope 4
[SwitchC-Vlan-interface103] quit
[SwitchC] interface vlan-interface 106
[SwitchC-Vlan-interface106] multicast ipv6 boundary scope 4
[SwitchC-Vlan-interface106] quit
# On Switch D, configure VLAN-interface 107 to be the boundary of admin-scope zone 2.
system-view...")
395
Expires: 00:01:25
Elected BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Uptime: 00:04:54
Next BSR message scheduled at: 00:00:06
Candidate BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Candidate RP: 1002::2(Vlan-interface101)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:15
# Display BSR information and the locally configured C-RP information on Switch D.
[SwitchD] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Accept Preferred
Scope: 14
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 3002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Uptime: 00:03:48
Next BSR message scheduled at: 00:01:12
Candidate BSR Address: 3002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Candidate RP: 3002::2(Vlan-interface104)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:10
# Display BSR information and the locally configured C-RP information on Switch F.
[SwitchF] display pim ipv6 bsr-info
396
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Uptime: 00:01:11
Next BSR message scheduled at: 00:00:49
Candidate BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Candidate RP: 8001::1(Vlan-interface109)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:55
To view the RP information learned on a switch, use the display pim ipv6 rp-info command. For
example:
# Display RP information on Switch B.
[SwitchB] display pim ipv6 rp-info
PIM-SM BSR RP information:
prefix/prefix length: FF0E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF1E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF2E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF3E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
397
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF4E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF5E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF6E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF7E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF8E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF9E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFAE::/16
RP: 8001::1
Priority: 192
398
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFBE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFCE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF04::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF14::/16
RP: 1002::2
399
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF24::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF34::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF44::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF54::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF64::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF74::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF84::/16
400
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF94::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFA4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFB4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFC4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFD4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFE4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
401
prefix/prefix length: FFF4::/16
RP: 1002::2
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
# Display RP information on Switch F.
[SwitchF] display pim rp-info
PIM-SM BSR RP information:
prefix/prefix length: FF0E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF1E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF2E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF3E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF4E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF5E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
402
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF6E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF7E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF8E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF9E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFAE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFBE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFCE::/16
RP: 8001::1
Priority: 192
403
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
IPv6 BIDIR-PIM configuration example
Network requirements
In the IPv6 BIDIR-PIM domain shown in Figure 106. S ource 1 and Source 2 send different IPv6 multicast
information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast information from
the two sources.
VLAN interface 102 of Switch C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6
BIDIR-PIM domain.
MLDv1 runs between Switch B and Host A and between Switch D and Host B.
404 Figure 106 Network diagram Device Interface IPv6 address Device Interface IPv6 address Switch A Vlan-int100 1001::1/64 Switch D Vlan-int300 4001::1/64 Vlan-int101 1002::1/64 Vlan-int400 5001::1/64 Switch B Vlan-int200 2001::1/64 Vlan-int103 3001::2/64 Vlan-int101 1002::2/64 Source 1 - 1001::2/64 Vlan-int102 2002::1/64 Source 2 - 5001::2/64 Switch C Vlan-int102 2002::2/64 Receiver 1 - 2001::2/64 Vlan-int103 3001::1/64 Receiver 2 - 4001::2/64 Loop0 6001::1/128 Configuration procedure 1. Configure IPv6 forwarding, IPv6 addresses and the IPv6 unicast routing protocol: Enable IPv6 forwarding on each switch, and config ure the IPv6 address and prefix length for each interface as per Figure 106. (Details not shown.) Conf igure OSPFv3 on the switches in the IPv6 BIDIR-PIM domain to ensure network-layer reachability among them. (Details not shown.) 2. Enable IPv6 multicast routing, IPv6 PIM-SM, IPv6 BIDIR-PIM, and MLD: # On Switch A, enable IPv6 multicast routing, en able IPv6 PIM-SM on each interface, and enable IPv6 BIDIR-PIM. system-view [SwitchA] multicast ipv6 routing-enable [SwitchA] interface vlan-interface 100 [SwitchA-Vlan-interface100] pim ipv6 sm [SwitchA-Vlan-interface100] quit [SwitchA] interface vlan-interface 101 [SwitchA-Vlan-interface101] pim ipv6 sm [SwitchA-Vlan-interface101] quit [SwitchA] pim ipv6 [SwitchA-pim6] bidir-pim enable [SwitchA-pim6] quit IPv6 BIDIR-PIM Source 1 Source 2 Host A Receiver 1 Switch A Vlan-int101 Vlan-int101Vlan-int102 Vlan-int102 Vlan-int103 Vlan-int103 Vlan-int100 Vlan-int200Vlan-i nt300Vlan-int400 Switch D Switch C Switch B Host B Receiver 2 Loop0