Home > Oki > Printer > OKI C130n User Manual

OKI C130n User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual OKI C130n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							101 - C130n User’s Guide
    Important!
    Do not touch the PC drum and the transfer belt on the imaging 
    cartridge.
     
    Position the removed imaging cartridge horizontally as shown in 
    the illustration.
     
    Be sure to keep the imaging cartridge horizontal and place it where 
    it will not become dirty.
     
    Do not leave the imaging cartridge removed for more than 15 
    minutes, and do not place the removed imaging cartridge in a 
    location where it would be exposed to direct light (such as 
    sunlight).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							102 - C130n User’s Guide
    3Clean the media feed rollers (1, bottom view) by wiping them with a soft, 
    dry cloth.
    WARNING!
    The area around the fuser 
    unit is extremely hot.
     
    Touching anything other 
    than the indicated levers 
    may result in burns. If you 
    get burned, immediately 
    cool the skin under cold 
    water, and then seek 
    professional medical 
    attention.
     
     
     
    Downloaded From ManualsPrinter.com Manuals 
    						
    							103 - C130n User’s Guide
    Important!
    Decreased print quality may 
    result if the surface of the 
    transfer roller is touched.
     
    Be careful not to touch the 
    surface of the transfer roller 
    (1, bottom view).
     
     
     
     
     
     
    4Slowly insert the imaging 
    cartridge vertically, and then 
    push it slightly down toward you 
    to finish reinstalling the imaging 
    cartridge.
    5Carefully close the top cover.
    Cleaning the Print Head 
    Window
    Downloaded From ManualsPrinter.com Manuals 
    						
    							104 - C130n User’s Guide
    1Perform the operation described below to switch the printer to the P/H 
    CLEAN UP mode.
    NoteTo exit P/H CLEAN UP mode, press the Cancel key.
    2Open the front cover.
    NoteBefore opening the front 
    cover, open Tray
     1 if it is 
    not already open.
    The magenta toner cartridge has 
    been moved to the position from 
    where it can be replaced.
    Press KeyUntil Display Reads
    MENU 
    MAIN MANU
    MAIN MENU  
    PRINT MENU
     × 2MAIN MENU  
    QUALITY MENU
    QUALITY MENU 
    REPLACE TONER
     × 3QUALITY MENU 
    P/H CLEAN UP
    P/H CLEAN UP 
    *YES
    *YES 
    IS SELECTED
    Then it changes to 
    OPEN DOOR 
    REMOVE TONER
    ENTER
    ENTER
    ENTER
    ENTER
    ENTER
    Downloaded From ManualsPrinter.com Manuals 
    						
    							105 - C130n User’s Guide
    3Pull down the handle on the 
    toner cartridge until the toner 
    cartridge is unlocked and moves 
    out slightly toward you. 
    4Remove the toner cartridge. 
    NoteWhen the magenta toner 
    cartridge is removed, a 
    gap is created within the 
    printer so that the print 
    head window can easily 
    be cleaned.
     
     
     
     
     
    Important!
    Do not touch the contact 
    indicated in the illustration.
     
     
     
     
     
     
     
     
     
     
     
    Downloaded From ManualsPrinter.com Manuals 
    						
    							106 - C130n User’s Guide
    5Close the front cover.
    NoteThe toner cartridge rotate 
    within the printer.
    6After the toner cartridges have 
    finished rotating, open the top 
    cover.
    7Grab the handle and lift it up 
    slightly to the back, and then 
    slowly pull the imaging cartridge 
    out vertically.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							107 - C130n User’s Guide
    Important!
    Do not touch the PC drum and the transfer belt on the imaging 
    cartridge. 
    Position the removed imaging cartridge horizontally as shown in 
    the illustration.
     
    Be sure to keep the imaging cartridge horizontal and place it where 
    it will not become dirty.
     
    Do not leave the imaging cartridge removed for more than 
    15
     minutes, and do not place the removed imaging cartridge in a 
    location where it would be exposed to direct light (such as 
    sunlight).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							108 - C130n User’s Guide
    8Clean the print head window (1, bottom view) by wiping it with a soft, dry 
    cloth.
    CAUTION
    The area around the fuser 
    unit is extremely hot.
     
    Touching anything other 
    than the indicated levers 
    may result in burns. If you 
    get burned, immediately 
    cool the skin under cold 
    water, and then seek 
    professional medical 
    attention.
     
     
     
     
    Downloaded From ManualsPrinter.com Manuals 
    						
    							109 - C130n User’s Guide
    Important!
    Decreased print quality may 
    result if the surface of the 
    transfer roller is touched.
     
    Be careful not to touch the 
    surface of the transfer roller 
    (1, bottom view).
     
     
     
     
     
     
     
    9Slowly insert the imaging 
    cartridge vertically, and then 
    push it slightly down toward you 
    to finish reinstalling the imaging 
    cartridge.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							110 - C130n User’s Guide
    10Close the top cover.
    11After the toner cartridges have 
    finished rotating, open the front 
    cover.
     
     
     
     
     
     
     
     
     
     
     
     
     
    12Align the shaft on each end of the toner cartridge with its holders, and 
    then insert the cartridge.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Oki manuals Comments (0)

    Related Manuals for OKI C130n User Manual