OKI C130n User Manual

							61 - C130n User’s Guide
Loading Plain Paper
1Remove the dust cover from 
Tray
 1.
2Slide the media guides to 
provide more space between 
them.
3Load the paper face up in the 
tray.
Downloaded From ManualsPrinter.com Manuals 
						

							62 - C130n User’s Guide
NoteDo not load paper above 
the 
 mark. Up to 200 
sheets (80 g/m2 [21 lb]) of 
plain paper can be 
loaded into the tray at 
one time.
4Slide the media guides against 
the edges of the paper.
5Reattach the dust cover. 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							63 - C130n User’s Guide
Other Media
When loading media other than plain paper, set the media mode (for 
example, Label, or Thick Stock) in the driver for optimum print quality.
Loading Labels/Postcard/Thick Stock and Letterhead
1Remove the dust cover from 
Tray
 1.
2Remove any media from the 
tray.
3Slide the media guides to 
provide more space between 
them.
Downloaded From ManualsPrinter.com Manuals 
						

							64 - C130n User’s Guide
4Load the media face up in the 
tray.
NoteUp to 50 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the media.
6Reattach the dust cover. 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							65 - C130n User’s Guide
Tray 2
Only Letter or A4 plain paper can be loaded in Tray 2.
Loading Plain Paper
1Pull out Tray 2 as far as 
possible.
2Lift up Tray 2 to remove it.
3Remove the lid from Tray 2.
Downloaded From ManualsPrinter.com Manuals 
						

							66 - C130n User’s Guide
4Press down the media pressure 
plate to lock it into place.
5Load the paper face up in the 
tray.
NoteDo not load above the 
100% line. Up to 500 
sheets (80 g/m
2 [21 lb]) of 
plain paper can be 
loaded into the tray at 
one time.
100%
75
50
Downloaded From ManualsPrinter.com Manuals 
						

							67 - C130n User’s Guide
6Reattach the lid to Tray 2.
7Reinsert Tray 2 into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							68 - C130n User’s Guide
Duplexing
Select paper with high opacity for duplex (double sided) printing. Opacity 
refers to how effectively paper blocks out what is written on the opposite side 
of the page. If the paper has low opacity (high translucency), then the printed 
data from one side of the page will show through to the other side. Check 
your application for margin information. For best results, print a small quantity 
to make sure the opacity is acceptable.
Duplex (Double sided) printing can be done automatically with the duplex 
option installed and selected.
Important!
Only Letter/A4 plain paper, 60–90 g/m2 (16–24 lb bond) can be 
autoduplexed. See “Print Media” on page 53. 
 
Duplexing labels, postcards, thick stock, or letterhead is not 
supported.
Duplex Printing
You should verify that the duplex option is physically installed on the printer to 
successfully duplex the job.
Check your application to determine how to set your margins for duplex  
printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip 
at the top.
If “Long Edge” is selected, the pages will be laid out to flip 
at the sides.
1
3
1
21
111
12
3
Downloaded From ManualsPrinter.com Manuals 
						

							69 - C130n User’s Guide
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is 
performed.
The following Order settings are available when “Booklet” is selected.
1Load plain paper into the tray.
2From the printer driver, specify the layout for duplex printing.
3Click OK.
NoteWith autoduplexing, the back side is printed first, and then the front 
side is printed.
If “Left Binding” is selected, the pages can be folded as a 
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a 
right-bound booklet.
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals 
						

							70 - C130n User’s Guide
Output Tray
All printed media is output to the face-down output tray on top of the printer. 
This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m2 
(21 lb) paper. 
NoteIf the media is stacked too high in the output tray, your printer may 
experience media misfeeds, excessive media curl, or static buildup. 
Downloaded From ManualsPrinter.com Manuals