Panasonic Dmc Fz50 Operating Instructions Manual

Menu Settings
101 VQT0X92
• You can set the aperture value, the shutter 
speed and the ISO sensitivity on the 
camera even when attaching the external 
flash.
• Some commercial external flashes have 
synchro terminals with high-voltage or 
reversed polarity. Using such extra flashes 
may cause a malfunction or the camera 
may not operate normally.
• If you use commercially available 
external flashes with communication 
functions other than the dedicated one, 
they may not operate normally or they 
may...

Menu Settings
102VQT0X92
Using the [PLAY] mode 
menu
You can use various functions in playback 
mode to rotate pictures, set protection for 
them etc.
• Refer to P102  to 111 for each menu item.
1Press [MENU/SET].
2Press / to select the menu 
item and then press .
• Press  at  to switch to the next 
menu screen.
• After performing steps 1 and 2, refer to 
the description of the menu item in the 
operating instructions and then set it.
wAbout the menu screen items• There are 3 menu screens (1/3, 2/3...

Menu Settings
103 VQT0X92
• The cursor displayed during a slide 
show  or while a slide show is paused 
 or during [MANUAL] slide show  is 
the same as ///.
•Press  to pause the slide show. Press 
 again to cancel pause.
•Press / while paused to display the 
previous or next picture. (However, the 
selected effect is disabled.)
3Press  to finish.
wSetting the audio, duration and effect
Select [DURATION], [EFFECT] or [AUDIO] 
on the screen shown in step
2 and set.• You can only select [MANUAL]...

Menu Settings
104VQT0X92
2Press [MENU/SET] to close the 
menu.
3Press  to select the picture 
then press 
.
• Repeat the above procedure.
•If  is pressed while the [ ] favorites 
icon is displayed, [ ] is cleared, and 
the favorites setting is canceled.
• You can set up to 999 pictures as 
favorites.
wDeleting all favorites
1Select [CANCEL] on the screen shown in 
step 
1 and then press [MENU/SET].
2Press  to select [YES] and then press 
[MENU/SET].
3Press [MENU/SET] to close the menu.
• When...

Menu Settings
105 VQT0X92
2Press  to select the direction 
to rotate the picture and then 
press [MENU/SET].
3Press [MENU/SET] twice to close 
the menu.
wExample
When rotating clockwise ( )
Original
picture
• When [ROTATE DISP.] is set to [ON], 
pictures recorded holding the camera 
vertically are played back vertically 
(rotated).
• If you take pictures when aiming the 
camera up or down, it may not be possible 
to display the pictures vertically. (P34)
• The picture may be slightly blurred when 
the...

Menu Settings
106VQT0X92
wSingle setting
1Press  to select the picture 
to print and then press 
 to 
set the number of prints.
• The number of prints icon [ ] 
appears.
• The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
wMulti setting
1Press  to select the picture 
to print then press 
 to set 
the number of prints.
• The number of prints icon [ ]
appears.
• Repeat the...

Menu Settings
107 VQT0X92
• DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge. The date 
printing setting on the printer may take 
priority over the date printing setting on 
the camera. Check the date printing 
setting on the printer also. (P115)
• It is necessary to delete all previous 
DPOF print information made on other 
equipment when setting DPOF print on 
the camera.
• If the file is not based on the DCF 
standard, the DPOF print setting...

Menu Settings
108VQT0X92
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P102)
You can add the audio after taking a 
picture.
1Press  to select the picture 
and then press 
 to start audio 
recording.
• The message [OVERWRITE AUDIO 
DATA?] screen appears when audio has 
already been recorded. Press  to 
select [YES] and then press [MENU/
SET] to start audio recording. (The 
original audio is overwritten.)
• Audio dubbing cannot be used with the 
following pictures.
– Motion...

Menu Settings
109 VQT0X92
2Press  to select the size and 
then press 
.
• Sizes smaller than the recorded picture 
are displayed.
– [ ]/[ ]/[ ]/[ ]/[ ]/[ ]
(When the aspect ratio setting is 
[].)
–[ ]/[ ]/[ ]
(When the aspect ratio setting is 
[].)
–[ ]/[ ]
(When the aspect ratio setting is 
[].)
• The message [DELETE ORIGINAL 
PICTURE?] appears.
3Press  to select [YES] or 
[NO] and then press [MENU/SET].
• The picture is overwritten when you 
select [YES]. Resized pictures cannot 
be restored...

Menu Settings
110VQT0X92
5Press  to select [YES] or 
[NO] and then press [MENU/SET].
• The picture is overwritten when you 
select [YES]. The trimmed pictures 
cannot be restored when they are 
overwritten.
• A trimmed picture is newly created 
when you select [NO].
• When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a trimmed picture.
6Press [MENU/SET] twice to close 
the menu.
\
• Depending on the cut size, the picture size 
of the trimmed picture may...