Panasonic Software Dp 130p Operating Instructions

							Installing the LPR (Line Printer Remote) Monitor
21
Windows 98/Me
Printer Section
NOTE1. The LPR Monitor is necessary to install your PC if printing a data via LAN.
12The LPR Port Name dialog box appears.
Type the IP Address of the machine and lpas the
queue name separated by a :
Ex: 10.74.229.105:lp
Click on the   button. If an error occurs
because the queue name was already used for the
same IP Address, select a different unique name
such as lpr.
13The screen reverts to the Printer’s Properties.
Check that the Print to the following port: was
changed as entered, and click on the Apply button
first and then on the   button.
The printer properties dialog box is closed and you
have now configured the printer as a network printer.
OK
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
22
Log in using an account with the administrators right.
Windows NT 4.0
1Click on the Start button, point to Settings, and click
Control Panel.
The Control Panel window appears.
Double-click on the Network applet.
The Network dialog box appears.
2Click on the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in the
Network Services list.)
If it is already installed, skip over to Step 7. Otherwise
continue installing the LPR Service.
3Click on the   button to display the
Select Network Service dialog box, then select
Microsoft TCP/IP Printing.
Click on the   button.Add...
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
23
Windows NT 4.0
Printer Section
4The Windows NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type
D:\i386 (where D: is your CD-ROM drive).
Click on the   button.
5After the files are copied into your Hard Drive, the
display returns to the Network dialog box. Confirm
that the Microsoft TCP/IP Printing service was added
to Network Services list.
Click on the   button.
Note:
Delete and Reinstall the Microsoft TCP/IP
Printing if an error occurs, and the Microsoft
TCP/IP Printing is displayed in the Network
Services list, but, the OK button does not
change into a Close button.
6The Network Settings Change dialog box is
displayed, click on the   button to confirm
whether to restart your computer now.
You have now completed the LPR Service
installation.
7After your computer is rebooted, click the Start
button, point to Settings, and then click Printers.
The Printers folder appears.
Right-click on your desired printer (Ex. Panasonic
DP-3000) and select Properties from the pop-up
menu.
Continue
Close
Yes
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
24
Windows NT 4.0
8The following step is to Register the LPR Port for
network printing.
Before proceeding, ensure that the Printer is
installed, connected to the Network, is turned ON
and operating properly.
Select the Ports Tab and click on the
 button.
9The Printer Ports dialog box appears.
Select LPR Port and click the 
button.
10The Add LPR compatible printer dialog box
appears.
Enter the IP Address of the Printer in the upper field,
and lp for the print queue name in the lower field.
Click on the   button.
(Please wait while the wizard verifies the IP Address
and connectivity to the Network)
Add Port...
New Port
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
25
Windows NT 4.0
Printer Section
11The Printer Ports dialog box appears.
Click on the   button.
12Select the printer port and click the 
button.
The printer properties dialog box is closed and you
have now configured the printer as a network printer.
Close
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
26
Log in using an account with the administrators right.
Windows 2000/XP
1Open the Printers folder.
Right-click on your desired printer (Ex.
Panasonic DP-3000) and select Properties
from the pop-up menu.
The printer properties dialog box appears.
2Select the Ports Tab and click on the
 button.
Add Port... 
						

							Installing the LPR (Line Printer Remote) Monitor
27
Windows 2000/XP
Printer Section
3Select Standard TCP/IP Port and click the
 button.
4Click on the   button.
5Enter the IP Address and the Port Name and
click the   button.
Note:
The Port Name is automatically
entered by Windows 2000/XP. You
may change this as required.
New Port ...
Next
Next
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
28
Windows 2000/XP
6Select Custom and click the 
button.
71. Under the Protocol, select LPR.
2. Under the LPR Settings, enter the
Queue Name (Ex. LPR1) and check the
LPR Byte Counting Enabled.
3. Click on the   button.
8Click on the   button.
Click on the   button.
The printer properties dialog box is closed and
you have now configured the printer as a
network printer.
Settings...
OK
Next
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
29
Windows 2000/XP
Printer Section
9Click on the   button.
10Click on the   button.
11Click on the   button.
Click on the   button.
The printer properties dialog box is closed and
you have now configured the printer as a
network printer.
Finish
Close
Apply
OK 
						

							30
Configuring the Printer Driver Settings
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. Upon printing, changing the properties of Paper/Layout, Handling, Quality and Device
Options is allowed by clicking Properties in the print dialog box of an application.
2.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified.
Windows 98/Me
1
Click the Start button, point to Settings, and then click
Printers.
2
Right-click the desired printer icon in the printers folder,
and select Properties in the pop-up menu.
The printer properties dialog box appears.