Ricoh Aficio MP 9000 User Manual
Have a look at the manual Ricoh Aficio MP 9000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 128
Copier/Document Server Features
120
4Reproduction Ratio
This section describes various items of [Reproduction Ratio] under [Copier/Docu-
ment Server Features].
❖Shortcut R/E
You can register up to two frequently used Reduce/Enlarge ratios other than
the fixed Reduce/Enlarge ratio and have them shown on the initial display.
You can also change registered Reduce/ Enlarge ratios.
Metric version
25%
50% (A3→A5, F→A5)
65% (A3→F)
71% (A3→A4, A4→A5)
75% (B4→F4)
82% (F→A4, B4→A4)
93%
115%...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-127.png "Page 128
Copier/Document Server Features
120
4Reproduction Ratio
This section describes various items of [Reproduction Ratio] under [Copier/Docu-
ment Server Features].
❖Shortcut R/E
You can register up to two frequently used Reduce/Enlarge ratios other than
the fixed Reduce/Enlarge ratio and have them shown on the initial display.
You can also change registered Reduce/ Enlarge ratios.
Metric version
25%
50% (A3→A5, F→A5)
65% (A3→F)
71% (A3→A4, A4→A5)
75% (B4→F4)
82% (F→A4, B4→A4)
93%
115%...")
![Page 129
Reproduction Ratio
121
4
Inch version
25%
50% (11”×17”→5
1/2”×81/2”)
65% (11”×17”→8
1/2”×11”)
73% (11”×15”→8
1/2”×11”)
78% (8
1/2”×14”→81/2”×11”)
85% (F→8
1/2”×11”)
93%
121% (8
1/2”×14”→11”×17”)
129 (%8
1/2”×11”→11”×17”)
155% (8
1/2”×81/2”→81/2”×14”)
200% (5
1/2×81/2→11×17)
400%
User R/E Ratio (25-400%)
Off
Default:
F1: 73%
F2: 155%
❖R/E Ratio
You can specify the enlargement and reduction ratios that appear if [Re-
duce/Enlarge] is pressed on the copier screen.
Downloaded...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-128.png "Page 129
Reproduction Ratio
121
4
Inch version
25%
50% (11”×17”→5
1/2”×81/2”)
65% (11”×17”→8
1/2”×11”)
73% (11”×15”→8
1/2”×11”)
78% (8
1/2”×14”→81/2”×11”)
85% (F→8
1/2”×11”)
93%
121% (8
1/2”×14”→11”×17”)
129 (%8
1/2”×11”→11”×17”)
155% (8
1/2”×81/2”→81/2”×14”)
200% (5
1/2×81/2→11×17)
400%
User R/E Ratio (25-400%)
Off
Default:
F1: 73%
F2: 155%
❖R/E Ratio
You can specify the enlargement and reduction ratios that appear if [Re-
duce/Enlarge] is pressed on the copier screen.
Downloaded...")
![Page 131
Reproduction Ratio
123
4
❖R/E Ratio Priority
You can set the ratio with priority when [Reduce / Enlarge] is pressed.
Metric version
400%
200%
141%
122%
115%
93%
82%
75%
71%
65%
50%
25%
Inch version
400%
200%
155%
129%
121%
93%
85%
78%
73%
65%
50%
25%
❖Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a
shortcut key.
Enter a ratio using number keys (in the range of 90 to 99%).
The ratio is set to 93% by default....](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-130.png "Page 131
Reproduction Ratio
123
4
❖R/E Ratio Priority
You can set the ratio with priority when [Reduce / Enlarge] is pressed.
Metric version
400%
200%
141%
122%
115%
93%
82%
75%
71%
65%
50%
25%
Inch version
400%
200%
155%
129%
121%
93%
85%
78%
73%
65%
50%
25%
❖Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a
shortcut key.
Enter a ratio using number keys (in the range of 90 to 99%).
The ratio is set to 93% by default....")
![Page 132
Copier/Document Server Features
124
4Edit
This section describes various items of [Edit] under [Copier/Document Server Fea-
tures].
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
Metric version: 0–30 mm (in increments of 1 mm)
Inch version: 0-1.2 (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
Metric version: 2–99 mm (in increments of 1 mm)
Inch version: 0.1-3.9 (in increments of...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-131.png "Page 132
Copier/Document Server Features
124
4Edit
This section describes various items of [Edit] under [Copier/Document Server Fea-
tures].
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
Metric version: 0–30 mm (in increments of 1 mm)
Inch version: 0-1.2 (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
Metric version: 2–99 mm (in increments of 1 mm)
Inch version: 0.1-3.9 (in increments of...")
Reproduction Ratio 123 4 ❖R/E Ratio Priority You can set the ratio with priority when [Reduce / Enlarge] is pressed. Metric version 400% 200% 141% 122% 115% 93% 82% 75% 71% 65% 50% 25% Inch version 400% 200% 155% 129% 121% 93% 85% 78% 73% 65% 50% 25% ❖Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key. Enter a ratio using number keys (in the range of 90 to 99%). The ratio is set to 93% by default. Note ❒For the procedure of entering the [Copier/Document Server Features], see p.3 “Accessing User Tools (System Settings)” Reference p.3 “Accessing User Tools (System Settings)” Downloaded From ManualsPrinter.com Manuals
Copier/Document Server Features 124 4Edit This section describes various items of [Edit] under [Copier/Document Server Fea- tures]. Default settings are shown in bold type. Enter the width of the binding margin with the number keys as follows: Metric version: 0–30 mm (in increments of 1 mm) Inch version: 0-1.2 (in increments of 0.1 inch) Enter the width of the erased margin with the number keys as follows: Metric version: 2–99 mm (in increments of 1 mm) Inch version: 0.1-3.9 (in increments of 0.1 inch) An image of approximately 1.5 mm (0.06”) will not be displayed as the width of the separation line, when specifying solid or broken lines. ❖Front Margin: Left/Right You can specify left and right margins on the front side of copies in Margin Adjustment mode. Left Right Default: Metric version: Left 5 mm Inch version: Left 0.2 ❖Back Margin: Left/Right You can specify left and right margins on the back side of copies in Margin Adjustment mode. Left Right Default: Metric version: Right 5 mm Inch version: Right 0.2 ❖Front Margin: Top/Bottom You can specify top and bottom margins on the front side of copies in Margin Adjustment mode. Top Bottom Default: Metric version: Top/Bottom 0 mm Inch version: Top/Bottom 0.0 Downloaded From ManualsPrinter.com Manuals
Edit 125 4 ❖Back Margin: Top / Bottom You can specify top and bottom margins on the back side of copies in Margin Adjustment mode. Top Bottom Default: Metric version: Top/Bottom 0 mm Inch version: Top/Bottom 0.0 ❖1 Sided → 2 Sided Auto Margin: TtoT In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side. The margin is set to the same value of “Back Margin: Left/Right. Left Right Default: Metric version: Right 5 mm Inch version: Right 0.2 ❖1 Sided → 2 Sided Auto Margin: TtoB In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side. The value set for Back Margin: Top/Bottom is used. Top Bottom Default: Metric version: Top/Bottom 0 mm Inch version: Top/Bottom 0.0 ❖Creep Setting for Magazine You can specify the creep binding margin width. Range: Metric version: 0 to 99 mm (in increments of 1 mm) Inch version: 0 to 3.9 inch (in increments of 0.1 inch) Default: Metric version: 5 mm Inch version: 0.2 ❖Erase Border Width You can specify the width for erasing border in the range of 2 to 99 mm (in units of 1 mm). Default: Metric version: 10 mm Inch version: 0.4 Downloaded From ManualsPrinter.com Manuals
Copier/Document Server Features 126 4 ❖Erase Original Shadow in Combine In Combine mode, you can specify whether to erase a 3 mm, 0.1 boundary margin around all four edges of each original. On Off ❖Erase Center Width You can specify the width of the erased center margins with this function. Default: Metric version: 10 mm Inch version: 0.4 ❖Front Cover Copy in Combine You can make a combined copy on the front cover sheet when you select Front Cover mode. Combine Do not Combine ❖Copy Order in Combine You can set the copy order in Combine mode. From Left to Right From Right to Left Top to Bottom from Left Top to Bttm from Right GCST019E Downloaded From ManualsPrinter.com Manuals
Edit 127 4 ❖Orientation: Booklet, Magazine You can select the orientation of copies to open when using Booklet or Mag- azine mode. Open to Left Open to Right ❖Copy on Designating Page in Combine You can specify whether to make a combined copy on the inserted slip sheets in Desig./Chapter mode. Combine Don not Combine ❖Image Repeat Separation Line You can select a separation line from: None, Solid, Broken A, Broken B, or Crop Marks. None Solid Broken A Broken B Crop Marks Downloaded From ManualsPrinter.com Manuals
Copier/Document Server Features 128 4 ❖Double Copies Separation Line You can select a separation line using the Double Copies function from: None, Solid, Broken A, Broken B, or Crop Marks. None Solid Broken A Broken B Crop Marks ❖Separation Line in Combine You can select a separation line using the Combine function from: None, Sol- id, Broken A, Broken B, or Crop Marks. None Solid Broken A Broken B Downloaded From ManualsPrinter.com Manuals
Edit 129 4 Crop Marks ❖Copy Back Cover When copying the back cover, you can specify whether to have the back cover outside (outside page) or inside (inside page). Outside Inside ❖Double Copies Position You can select the copy position of bottom or left page according to top or right page as the original image position. Same Position as Original Image Position Symmetrical to Original Image Position Note ❒For the procedure of entering the [Copier/Document Server Features], see p.3 “Accessing User Tools (System Settings)” Reference p.3 “Accessing User Tools (System Settings)” Booklet/Magazine, Copy/ Document Server Reference Downloaded From ManualsPrinter.com Manuals
Copier/Document Server Features 130 4Stamp This section describes various items of [Stamp] under [Copier/Document Server Fea- tures]. Default settings are shown in bold type. Background Numbering This section describes various items of [Background Numbering] under [Stamp]. ❖Size You can set the size of the numbers. Small Normal Large ❖Density You can set the density of the numbers. Light Normal Dark Very Dark Preset Stamp This section describes various items of [Preset Stamp] under [Stamp]. ❖Stamp Language You can select the language of the message printed in Stamp mode. English German French Italian Spanish Dutch Portuguese Polish Czech Swedish Finnish Hungarian Downloaded From ManualsPrinter.com Manuals
Stamp 131 4 Norwegian Danish Russian Japanese Simplified Chinese Traditional Chinese Hangul ❖Stamp Priority You can select the stamp type given priority when [Preset Stamp] is pressed. COPY URGENT PRIORITY For Your Info. PRELIMINARY For Internal Use Only CONFIDENTIAL DRAFT ❖Stamp Format You can specify how each of stamp is printed. Stamp Position You can specify where to print the stamp. Top Left Top Center Top Right Center Left Center Center Right Bottom Left Bottom Center Bottom Right Downloaded From ManualsPrinter.com Manuals
Copier/Document Server Features 132 4 Stamp Position You can adjust the print position of the stamp within the available range as shown below. Metric version: Top Left…T/B: 4-144mm, L/R: 4-144mm Top Center…T/B: 4-144mm, L/R: 72-72mm Top Right…T/B: 4-144mm, L/R: 4-144mm Center Left…T/B: 72-72mm, L/R: 4-144mm Center…T/B: 72-72mm, L/R: 72-72mm Center Right…T/B: 72-72mm, L/R: 4-144mm Bottom Left…T/B: 4-144mm, L/R: 4-144mm Bottom Center…T/B: 4-144mm, L/R: 72-72mm Bottom Right…T/B: 4-144mm, L/R: 4-144mm Inch version: Top Left…T/B: 0.1-5.7”, L/R: 0.1-5.7” Top Center…T/B: 0.1-5.7”, L/R: 2.8-2.8” Top Right…T/B: 0.1-5.7”, L/R: 0.1-5.7” Center Left…T/B: 2.8-2.8”, L/R: 0.1-5.7” Center…T/B: 2.8-2.8”, L/R: 2.8-2.8” Center Right…T/B: 2.8-2.8”, L/R: 0.1-5.7” Bottom Left…T/B: 0.1-5.7”, L/R: 0.1-5.7” Bottom Center…T/B: 0.1-5.7”, L/R: 2.8-2.8” Bottom Right…T/B: 0.1-5.7”, L/R: 0.1-5.7” Size You can set the size of the stamp. 1X 2X 4X Density You can set the pattern used to print the stamp. Normal The stamp is printed on the image. You cannot check which parts will overlap. Lighter The image can be seen through the stamp. Lightest The image appears even clearer than in the Lighter setting. Downloaded From ManualsPrinter.com Manuals