Ricoh Aficio MP 9000 User Manual

							System
163
5
❖Initial Print Job List
You can set the desired type of print job list that appears on the screen when
you press [Print Jobs].
Complete List
Displays the list of print jobs stored in the machine.
List Per User ID
Displays the list of the User ID who stored a file in the machine.
❖Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority,
according to paper size or resolution.
 Font Priority
This setting uses memory for registering fonts.
Frame Priority
This setting uses frame memory for high speed printing.
❖Duplex
You can select to have print on both sides of each pages.
Off
 Long Edge Bind
 Short Edge Bind
❖Copies
You can specify the number of print sets. This setting is disabled if the num-
ber of pages to print has been specified with the printer driver or another
command.
 1–9999
Default: 1
❖Blank Page Print
You can select whether or not to print blank pages.
On
Off
Pages that match one of the following conditions are identified as blank.
 There are no images.
 There are images but they are outside of the printable area.
 There are only blank characters.
❖Toner Saving
Select either to apply or not to apply Toner Saving.
On
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Features
164
5
❖Spool Image
You can select to print spool images. The print job transmitted from the com-
puter is temporarily stored on the machines hard disk as bit map images that
can be printed when transmission is complete. If more than one print job is
transmitted, a spool image is printed for each.
Off
On
❖Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before al-
lowing other functions such as the copier and scanner functions to interrupt
it.
Long Wait
 Medium Wait
Short Wait
In Reserved Job Order
❖Printer Language
You can specify the printer language.
Auto
PCL
PS
PDF
This menu appears only when the PostScript 3 unit (optional) is installed.
❖Sub Paper Size
You can enable the Auto Substitute Paper Size (A4.LT) feature.
Auto
Off
❖Page Size
You can select the default paper size.
12×18
11×17
8
1/2×14
8
1/2×11
5
1/2×81/2
71/4×101/2
8×13
8
1/2×13
8
1/4×13
A3
B4 JIS
Downloaded From ManualsPrinter.com Manuals 
						

							System
165
5
A4
B5 JIS
A5
B6 JIS
A6
8K
 16K
 Custom Size
Default: 
Metric version: A4
 Inch version: 8
1/2×11
❖Letterhead Setting
You can rotate original images when printing.
When printing, original images are always rotated by 180 degrees. Therefore,
output might not be as expected when printing onto letterhead or preprinted
paper requiring orientation. Using this function, you can specify image rota-
tion.
Off
When set to Off, original images are rotated by 180 degrees.
Auto Detect
When set to Auto Detect, the machine detects a letterhead or preprinted
paper automatically, and does not rotate them.
 On (Always)
When set to On (Always), the machine does not rotate the original images.
This function reduces printing speed.
❖Bypass Tray Setting Priority
You can specify which of the two options, (Printer) Driver / Command or
Machine Settings, has priority for determining the paper size for the bypass
tray.
Driver / Command
 Machine Settings
❖Edge to Edge Print
You can select whether or not to print on the entire sheet.
On
Off
The 5 mm margin along the edges may not be printed properly.
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Features
166
5
❖Default Printer Language
You can set the default printer language if the machine cannot find the printer
language automatically.
PCL
PS
PDF
This menu appears only when the PostScript 3 unit (optional) is installed.
❖Tray Switching
You can set to switch the paper tray.
Off
On
Reference
Loading paper, Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							Host Interface
167
5 Host Interface
This section describes various items of [Host Interface] under [Printer Features].
Default settings are shown in bold type.
❖I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change
this setting.
128KB
 256KB
❖I/O Timeout
You can set how many seconds the machine should wait before ending a print
job. If data from another port usually arrives in the middle of a print job, you
should increase this timeout period.
 10 seconds
15 seconds
 20 seconds
 25 seconds
 60 seconds
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Features
168
5PCL Menu
This section describes various items of [PCL Menu] under [Printer Features].
Default settings are shown in bold type.
❖Orientation
You can set the page orientation.
Portrait
Landscape
❖Form Lines
You can set the number of lines per page.
 5 to 128 by 1
Default: 
Metric version: 64
 Inch version: 60
❖Font Source
You can set the storage location of the default font.
Resident
RAM
HDD
SD
RAM, HDD and SD can be selected only when fonts have been downloaded
to the machine.
❖Font Number
You can set the ID of the default font you want to use.
 0 to 63 by 1
The ID is set to 0 by default.
❖Point Size
You can set the point size you want to use for the selected font.
 4.00 to 999.75 by 0.25
This setting is effective only with variable-space fonts.
The size is set to 12.00 by default.
❖Font Pitch
You can set the number of characters per inch for the selected font.
 0.44 to 99.99 by 0.01
This setting is effective only with fixed-space fonts.
The font pitch is set to 10.00 by default.
Downloaded From ManualsPrinter.com Manuals 
						

							PCL Menu
169
5
❖Symbol Set
You can specify the set of print characters for the selected font. The available
options are as follows:
Roman-8, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852, PC8-TK,
Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US, MS Publ, Math-8,
PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21,
ISO 60, ISO 69, Win 3.0
❖Courier Font
You can select a courier font type.
Regular
Dark
❖Extend A4 Width
You can extend the printing area width (when printing on A4 sheet with
PCL).
Off
On
When the setting is On, the width will be 8
1/2 inches.
❖Append CR to LF
When set to On, a carriage return will follow each line feed: CR=CR, LF=CR−LF,
FF=CR−FF.
Off
On
❖Resolution
You can set the print resolution in dots per inch.
 300 dpi
600 dpi
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Features
170
5PS Menu
This section describes various items of [PS Menu] under [Printer Features].
Default settings are shown in bold type.
This menu appears only when the optional PostScript 3 unit is installed.
❖Data Format
You can select a data format.
Binary Data
TBCP
This setting is not effective when operating the machine with a parallel or
EtherTalk connection.
When operating the machine with a parallel connection, and also if the binary
data is sent from the printer driver, the print job is canceled.
When operating the machine with an Ethernet connection, the print job is can-
celed under the following conditions;
 The printer driver data format is TBCP, and the data format selected on the
display panel is Binary Data.
  The printer driver data format is binary, and the data format selected on
the display panel is TBCP.
❖Resolution
You can set the print resolution in dots per inch.
 300 dpi
600 dpi
 1200 dpi
Downloaded From ManualsPrinter.com Manuals 
						

							PDF Menu
171
5 PDF Menu
This section describes various items of [PDF Menu] under [Printer Features].
Default settings are shown in bold type.
❖Change PDF Password
Set the password for the PDF file executing PDF Direct Print.
 Current Password
 New Password
 Confirm New Password
A password can be set using on the Web Image Monitor, but in this case the
password information is sent through the network. If secu rity is a priority, set
the password using this menu from the Control Panel.
❖PDF Group Password
Set the group password already specified with DeskTopBinder Lite.
 Current Password
 New Password
 Confirm New Password
A password can be set using on the Web Image Monitor, but in this case the
password information is sent through the network. If secu rity is a priority, set
the password using this menu from the Control Panel.
❖Resolution
You can set the print resolution in dots per inch.
 300 dpi
600 dpi
 1200 dpi
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Features
172
5
Downloaded From ManualsPrinter.com Manuals