Ricoh Aficio MP 9000 User Manual

							Stamp
133
4
 Page to Stamp
You can specify whether to print the stamp on all pages or only the first
page.
All Pages
1st Page Only
 Dup. Back Pg. Stamp Pos.
You can adjust the stamp pos ition for back side in duplex mode, within the
available range as shown below.
Metric version:
 Left-Right: Left 432 mm – Right 432 mm
 Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
 Left-Right: Left 17.0” – Right 17.0”
 Top-Bottom: Top 17.0” – Bottom 17.0”
Reference
Preset Stamp, Copy/ Document Server Reference
User Stamp
This section describes various items of [User Stamp] under [Stamp].
❖Program/Delete Stamp
You can register, change, or delete these designs as user stamps.
You can register up to five custom stamps with your favorite designs.
❖Stamp Format:1-5
You can specify how each of registered User Stamps 1 to 5 is printed.
Stamp Position
You can specify where to print the User Stamp.
Top Left
Top Center
Top Right
Center Left
Center
 Center Right
Bottom Left
Bottom Center
 Bottom Right
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
134
4
Stamp Position
You can adjust the print position of the User Stamp within the available
range as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Center…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Center Left…T/B: 72-72mm, L/R: 4-144mm
 Center…T/B: 72-72mm, L/R: 72-72mm
 Center Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bottom Center…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Top Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Top Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Center Left…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Center…T/B: 2.8-2.8”, L/R: 2.8-2.8”
 Center Right…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Bottom Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Bottom Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Bottom Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Page to Stamp
You can specify whether to print the stamp on all pages or only the first
page.
 All Pages
1st Page Only
 Dup. Back Pg. Stamp Pos.
You can adjust the stamp pos ition for back side in duplex mode, within the
available range as shown below.
Metric version:
 Left-Right: Left 432 mm – Right 432 mm
 Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
 Left-Right: Left 17.0” – Right 17.0”
 Top-Bottom: Top 17.0” – Bottom 17.0”
Reference
Copy/ Document Server ReferenceUser Stamp
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
135
4
Date Stamp
This section describes various items of [Date Stamp] under [Stamp].
❖Format
You can select the date format for Date Stamp mode.
 MM/DD/YYYY
 MM.DD.YYYY
 DD/MM/YYYY
 DD.MM.YYYY
 YYYY.MM.DD
Default:
Metric version: DD/MM/YYYY
 Inch version: MM/DD/YYYY
❖Font
You can select the Date Stamp font.
Font 1
Font 2
Font 3
❖Size
You can set the Date Stamp size.
Auto
Large
 Middle
Small
❖Superimpose
You can have the Date Stamp printed in white when it overlaps black parts of
the image.
On
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
136
4
❖Stamp Setting
You can specify how Date Stamp is printed.
Stamp Position
You can specify where to print the Date Stamp.
Top Left
Top Center
 Top Right
Bottom Left
Bottom Center
 Bottom Right
Stamp Position
You can adjust the print position of the Date Stamp within the available
range as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Center…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Center Left…T/B: 72-72mm, L/R: 4-144mm
 Center…T/B: 72-72mm, L/R: 72-72mm
 Center Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bottom Center…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Top Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Top Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Center Left…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Center…T/B: 2.8-2.8”, L/R: 2.8-2.8”
 Center Right…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Bottom Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Bottom Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Bottom Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Page to Stamp
You can specify whether to print the stamp on all pages or only the first
page.
All Pages
1st Page Only
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
137
4
 Dup. Back Pg. Stamp Pos.
You can adjust the stamp pos ition for back side in duplex mode, within the
available range as shown below.
Metric version:
 Left-Right: Left 432 mm – Right 432 mm
 Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
 Left-Right: Left 17.0” – Right 17.0”
 Top-Bottom: Top 17.0” – Bottom 17.0”
Page Numbering
This section describes various items of [Page Numbering] under [Stamp].
❖Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
P1,P2…
 1/5,2/5…
 -1-,-2-…
 P.1,P.2…
1,2…
 1-1,1-2…
❖Font
You can select the font in Page Numbering mode.
Font 1
Font 2
Font 3
❖Size
You can set the size of the stamp printed in Page Numbering mode.
Auto
Large
 Middle
Small
❖Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed in Duplex
mode.
Opposite Position
 Same Position
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
138
4
❖Page Numbering in Combine
You can set page numbering when using the Combine function and the Page
Numbering function together.
Per Original
Per Copy
❖Stamp on Designating Slip Sheet
You can select to print the page number onto slip sheets when using the Des-
ignate function set to [Copy] and the Page Numbering function together.
On
Off
❖Stamp Position
You can specify how each of stamp is printed.
Stamp Position
You can specify where to print the stamp.
Top Left
Top Center
 Top Right
Bottom Left
Bottom Center
 Bottom Right
For the patterns of P1, P2, ---, 1/5, 2/5, ---, P.1, P.2, ---, 1, 2, --, and Page
1, Page 2, ---, the machine is shipped from the factory with this position set
to Top Right. 
For the patterns of -1-, -2-, --- and 1-1, 1-2, --- , the machine has this position
set to Bottom Center. 
The setting range is as follows:
Stamp Position
You can adjust the print position of the stamp within the available range
as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Center…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Center Left…T/B: 72-72mm, L/R: 4-144mm
 Center…T/B: 72-72mm, L/R: 72-72mm
 Center Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bottom Center…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
139
4
Inch version:
 Top Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Top Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Top Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Center Left…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Center…T/B: 2.8-2.8”, L/R: 2.8-2.8”
 Center Right…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Bottom Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Bottom Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Bottom Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Dup. Back Pg. Stamp Pos.
You can adjust the stamp pos ition for back side in duplex mode, within the
available range as shown below.
Metric version:
 Left-Right: Left 432 mm – Right 432 mm
 Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
 Left-Right: Left 17.0” – Right 17.0”
 Top-Bottom: Top 17.0” – Bottom 17.0”
❖Superimpose
You can have page numbers printed in white when they overlap black parts
of the image.
On
Off
❖Page Numbering Initial Letter
Switch the page print language.
P1, P2, ... / P.1, P.2 ...
 S1, S2, ... / S.1, S.2 ...
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
140
4
Stamp Text
This section describes various items of [Stamp Text] under [Stamp].
❖Font
You can select the font in Stamp Text mode.
Font 1
Font 2
Font 3
❖Size
You can set the size of the stamp printed in Stamp Text mode.
Auto
Large
 Middle
Small
❖Superimpose
You can have the Stamp Text printed in white when it overlaps black parts of
the image.
On
Off
❖Stamp Setting
You can specify how Stamp Text is printed.
Stamp Position
You can specify where to print the Stamp Text.
Top Left
Top Center
Top Right
Bottom Left
 Center Right
Downloaded From ManualsPrinter.com Manuals 
						

							Stamp
141
4
Stamp Position
You can adjust the print position of the Stamp Text within the available
range as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Center…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Center Left…T/B: 72-72mm, L/R: 4-144mm
 Center…T/B: 72-72mm, L/R: 72-72mm
 Center Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bottom Center…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm, L/R: 4-144mm
Inch version:
 Top Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Top Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Top Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Center Left…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Center…T/B: 2.8-2.8”, L/R: 2.8-2.8”
 Center Right…T/B: 2.8-2.8”, L/R: 0.1-5.7”
 Bottom Left…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Bottom Center…T/B: 0.1-5.7”, L/R: 2.8-2.8”
 Bottom Right…T/B: 0.1-5.7”, L/R: 0.1-5.7”
 Page to Stamp
You can specify whether to print the stamp on all pages or only the first
page.
All Pages
1st Page Only
 Dup. Back Pg. Stamp Pos.
You can adjust the stamp pos ition for back side in duplex mode, within the
available range as shown below.
Metric version:
 Left-Right: Left 432 mm – Right 432 mm
 Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
 Left-Right: Left 17.0” – Right 17.0”
 Top-Bottom: Top 17.0” – Bottom 17.0”
Note
❒For the procedure of entering the [Copier/Document Server Features], see p.3
“Accessing User Tools (System Settings)”
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
142
4Input/Output
This section describes various items of [Input/Output] under [Copier/Document Serv-
er Features].
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to 5 second(s) by default.
❖Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an orig-
inal placed on the exposure glass.
Face Up
Face Down
❖Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖Sort/Stack Shift setting
You can specify whethere to shift the Shift Tray in sort mode or stack mode.
On
Off
❖Insert Separation Sheet
You can specify the number of copy pages for inserting the Separation Sheet
from 1 to 999 pages in increments of 1 page.
Downloaded From ManualsPrinter.com Manuals