Toshiba Perception Electronic Business Communications System Installation And Maintenance Manual

							Enter: O--8 or 
0 
llB.lst be Rlad@* 
P-1 shows the p 
0 
e an entire using 
is entered, only 
1) (defined in Program): Identifies the 
as king a 
t group. 
2) Member NuIta3er: a unique to each trunk in a 
The numerical order of th 
texmine the or 
thetnlnkswill be selected 
will be selected first. Tkhighest 
Enter:Groupand 
(Trunk Directory 
defines a phant 
lines to a station 
Enter: 3-digit b---mr Private Lines Only (Trunk Gr 
I; 
to assign private 
Ames 
response e cess to 
nk for 
th day and night service, 
i 
ter: Y (yes) or  
						

							19 NARY) E2 
signs the night sta 
2 
is 
sign a to e DM us for 
entry in Sys ta 
( 1. 
S us 
C 
or 
OlS 
CQMfSCtLOnS) ., 
Enter: YJ QK N 
(Control of Disconnect)--Defines the release control of !L?& DID or 
. 
ng Party Control, circuit is not released until the 
t originated &he call disconnects. 
: First Party Release, ei can release the 
cmnnection. 
(Incanning Dialingk-Informs the aling to 
ngcall, ForTIE 
DIP - PUl 
(Dialing tgoingb-Selects thetyp of tgoing 
323, 
Enter: PlO ... Rotary Dial 10 
Dial 2 
( isionl--DeterIuines if an provided 
to the distant trunk on incoming &Us. If is entered, the system will 
eturn answer supervision. 
ter:Yor N 
Least Cost Routing Data Block (TABLEQ) 
0 Least cost 
trunkbasedon the exammes the 
dialed, checking the area 
tion and the time of day,  
						

							19 
o The ICR data block has been divided between 
utility program DICl & 
Dia. The first ICR program 
pamrenters, the fifteen (15 aneuus system 
sixteen (16) 
area/office tables to further 
program DIG! defines 
(15) tables of six 
or t day selection 
(Request)--Indicatesprogramhasl 
. sible 
scellan 
PEC entify 
systeln operating paranreters. 
table, lprogram to define each area 
Z4CC--Mea/Office Code ICable: Used in DE1 program to ify an area 
code table. 
ion sequence, ram to define 
ify Digits Table: 
tiontothedialed in 
2 program to define digit 
for the 
E Pr teach 
t for PAR 11 be: 
ICC (Interchangeable Codes)--A 
codes are used, Interchangeable 
the second digit 
three digits fol 
the first three a DDD prefix is not 
mter: Y (yes) or N (no) that interchangeable 
thathaveOor1as 
the 
as 
(Operator TimeoUt)--Mines thetinte, in seco 
1 wait for tional digits to be dialed fol 
Enter: Tme inseconds (for e: 10) 
access code has been dialed. dial tone after 
11 cause the system to give a 
en the last choice rcxlte is ing selected,  
						

							19 
( 26 
Ares Codeb-Defines the area code in 
diakd nlAl&ers 
in Toll Restri 
TEC (Toll Free calls)--A 
.;800) to the route table 
informs the system to treat arG 
er: Y (yes) or 
mdh 
DNXXN%Xe@. 
todelete semice 
(Directory Assistance Calls 
stance direct0 assistance calls (WA + 
stance Inforruation 
long distance dir 
tek=Defines the route table to be 
directory assistance 
ls (WA+555+ 1 if 
Prefixb-4X!fines the Direct Distance Dialing 
ing Plan Area). 
eable code as an areacode. 
(Route Table  
						

							19 
( 
(AreaCcdes-Add)--Indicates the area codes to 
A xmxinwm of 160 area codes 
ins 
ible 
aut 
x o-9  = 
the area 
are del 
Codes can only 
Enter: Table 
Code)--Identifies the area 
le is signed 
to, 
x=0--9 
(Route Table 
b4pecifies tie 
to 
foil 
or calls meeting 
is area/office 
table 
: RcruteTable 
(1 - 15) 
(Office Codes-Add)-Indicates 
toallcC?des 
es that are to be 
Office codes 
may be deleted 
in the same manner 
or as a rangeof cedes. 
I&E 
Office Codes 
2209 
220 - 229 
2316 
231 
- 236 
2478  
						

							19 
1 28 
P= t for 
or 
Route Eble 
(Route Schedule-- W-Defines the time of day interval for the first 
of 3 possible routing schedules. 
andendtimeareentered 
a 24 hour clock format. 
Einter: Start Time EndTime (for 
le: 0900 1700) 
(Class 3 Routing 
acceSsable to station 
in 
F-Defines the  F-Defines the 
ce  ce 
and ICl during  and ICl during 
.  . 
6)  6) in the order of  in the order of 
selection prio~ity~  selection prio~ity~ 
le: 
etc.)  ting 
ice (for le: 
etc.) 
or 
ne 
JCIJ (Class 1 Routing Priority)--Defines the 
choice sequence 
accessable to station dlasse and ICY during 
sc timinterval, 
Ebtertheroutes (RTl- 
6) in the order of selection priority. 
Enter: Routing Choice (for 
le: RT4 R!Z3 etc,) 
or 
ne 
routes defined for station class of service for 
classes of service for LCR.  
						

							SCHE3 (Route Schedule - 
of Possible B)--Defines the time of 
interval for the second, 
routi 
end of 
ScheduleAi 
Enter: 
iorityk- 
ing Choice (for but for e 
e 
ting &iority)-- 
for hed.ule 
e, 
ting Priority+-= 
w ice (for 
or 
ne for e 
§CBC (RouteScheduleC)--Defines the 
interval for the last of 
of 
are 
iority)-- as 
in e 
3 but for 
Enter: ting Choice (for 
etc) 
e CthisLkry for IL!3 
11 also cause 1 
noneforthis schedule. 
as and 
le: 
or 
ne 
a (Class 1 Routing Priority+-Same as ICl in Schedule 
ScheduleCtimeinterval. 
Enter: ting Choice (for le: 
RT 5 etc) 
Or 
ne B but for 
P= t in response to 
ify digits table)  
						

							(PRELmmwY) 
30 
ify Digits Table 
ifies the 
ify Digits Table 
Route Bible (RTl - RT6). 
re than one route, 
= 2 swnd pause 
-5secondpause 
(eachpauseccdequalsldigit) 
recordedi.ntheSystem 
the system as expl 
Theteminalis 
to the . 
RS23 
connector Uabeled 
the co 
thIXEC. piss rear 
In tion to 
connector, a 
hing custawc RanswF31c onl amnector is provided. By 
em, al.1 functions noxmally 
parfomsdbythelocal termindLcanbeperfo~fraanar~~locatian. 
The TTY and 
ports can operateata 
zeastandard of 300 or 1200 bps, and 
el ASCII code with one 
bit, 
parity bit. 
The one stop bit and one 
system transmits even parity and ignores ths parity bit on 
receive side, The 
is selectedby apush-on/pus f swit located 
on the front of the DP 
(Figure 1). Theassociated 
is on en 1200 
bpsis selected.  
						

							19 
E 31 
pin assignmenti of 
RXD Received e: 
1 
Designation 
Thedatateminalcmnectorislocatedin 
anale 25-pin EZA type connectors are 
tOptOhOttOmth@ 
comectorsarelabeled: 
terminalintothe 
data terminal. shcmld be set for 
ation before switching its for full duplex 
event unauthorized 
system requires an 
ramcanbecalledup. 
requesting each utility. Data base, the 
e are three levels of authorizati 
-digit code that is assigned in the system 
all levels are assigned 0000, 
Authorization Code Change pmcedure ( 
activity granted to each 
1 
is 
el 1: Can do all activities 
of 
3. 
Canchange the 
git 
z 
1, *  
						

							19 
(P 
:Can do all Level .1 activities 
tlatellccde. 
3 code. or 
ly assigned for end user use. 
SMDRData 
request printouts 0 
: 
rization 
e, pr 
several 
is done 
e is not effective enaCE4Tis used, 
Takecarenottokavethe 
authorization code displayed on the screen. 
Ys entered (return to Step 21, 
if valid code is enter& (pr 
to request Utility 
izatio 
after 
entered am fr 
tea the 
w * 
via a Utility Program is a matter of r 
the systw via the data terminal. 
are mnemonics that are usually abbr 
If an improper response is made to a 
anueric code. 
programin use and 
lity : 
 
ted. 
e the previ