Toshiba Perception Electronic Business Communications System Installation And Maintenance Manual

							EiFuml4 
EXURl5 
ERUX16 
ExCR17 
EFuCR18 Nov. 84 PRCC%AMMIN(; (P-NARY) 
PAGE 73 
Number of Area Code is over @&&mm 160) 
Number of Office Code is over (?&X~RUKI 800) 
Schedule time is out of range, (B&O 23, 
0 59) 
Schedule time error. 
Route No. is double assigned, 
leted. 
If an CW response is received, 
l--The following responses are possible: 
Pm= Output System Data Block 
ct1 x = Ignore line,entered 
Ctl H= Backspace 
DEL = Stop printing and return to REQ 
DEZDEL= Abort program  
						

							Nov. 84 
PRCGEGMMINS (PRELIMINARY) 
PAGE7 
Authorization Procedure must be coqleted. 
If an 9X response is received, 
proceed as follows: 
ng responses are possible: 
PRT= Output System Data Block 
ctl x = Ignore line entered 
Ctl. H= Backspace. 
DEL= Stop printing and return to 
DEL DEL= Abort program 
Authorization Procedure mst be completed, If an OK response is received, 
proceed as follows: I) 
l--The following responses are possible: 
EIAILLI- All SDBs will be output in numerical order of &ports (lowest first) 
PORNM= Port NNXdatawill beoutput 
PORVAC = A list of all unassigned po 11 be outpu 
DNALL = All SDBs will be output in cd. order ( st first) by DN 
(PDN for EXTs) 
DNNNN = DN NNN data will be c&put; if it is a mltiple appearance DN, all 
Data Blocks it appears in will be output 
EiKTU= All J%!l SDBs will be cutput in order of PDN (lowest first) 
STTWiL= All standard telephone Data Blocks will be output in order of DN 
(lowest first) 
ctl x = Ignore line entered 
Ctl. H= Backspace 
DEL= Stop printing and return to REQ 
DE&DEL= Abort program  
						

							Nov. 84 
PROGRAMMING (PRELIMINARY) 
PAGE 75 
Authorization Procedure must be completed. 
proceed as follows: If an -OK response is received, 
E l-The following responses are possible: 
Pm= COSData?3lockwill beoutput 
ctl x = Ignore line entered 
ctl E = Backspace 
DEL= Stop printing and return to REQ 
DELDEL= Abort program 
Authorization Procedure must be coqleted, 
proceed as follows: If an @OK response is received, 
l--T&he following responses are possible: 
TRDAU: All Toll restriction-data blocks will. be output. 
PAR: Miscellaneous Paramteres Table will. be output. 
CISALL: All code tables; area, office and area/officewill. be output for all8 
classes, 
CILSCNX: All code tables; area, office and area/office will be output for Class 
X. 
MC&L: All area/office code tables will be output. 
AOCMXX: The area code and all office codes for AredOffice Code Table no. XX 
will be a&put. 
CODXEC: 
ctl x = The Area/Office Cede Table relating to area code XXX will be cxltput. 
Ignore line entered 
CU. H = Backs!oace 
DEL= 
Stop printing and return to FUQ 
DfZLDEL= Abort program  
						

							NOV. a4 PRCGUWMING (PRELIMINARY) 
E 76 
Authorization Procedure must be ccq$eted. If an mOKg response is receivedp 
proceed as follows: 
l--The following responses are possible: 
Output all Speed Dial List Data Blocks 
=outputSystemSpeed Dial List DataBlock 
LfSTfSJ= Output List #N Data Block 
ctl x = Ignore line entered 
Ctl. H= 
BaCkspace 
DEL = Stop printing and return to 
DEL DEL= Abort program 
at 
proceed as follows: leted. If an ) response is received, 
l--The following responses are possible: 
- PRT= Output SMDRDataBlock 
ctl x = Ignore line entered 
Ctl H= Backspace 
DEL= Stop printing and return to R3Q 
DELDEL= Abort program  
						

							Nov. 84 
PRcmAmmG(PmNARY) 
PAGE 77 
Authorization Procedure must be ccxnpleted. 
proceed as follows: If an %K* response is received, 
l--The following responses are possible: 
AI&= AllTGPDataBlcckswill beoutput 
GE?PXX= 2GPXXDataBlockwill he output 
CcX=All00TrunkDataBlockswillheo~tp~t 
EEX= 
AllFxTTunkDataBl~kswillbea;ltput 
WAT = 
All WATS TrunkDats Blocks will be output 
TIE= AllTIETnmkDataBlockswillbeautput 
DID= 
All DI~TrunkDataBlockswill beoutput 
CSA = 
All a3ATnlnkDataBlockswillbeoutput 
PVL= AllPvLTrunkDataBlo&swillbea~tp~t 
ctl x = Ignore line entered 
CtlH= 
-J-pace 
DEL= Stop printing snd return to REQ 
DELDEL= Abortprogram  
						

							Nav. 84 
PROGRAMMING (PRELIMINARY) 
PPGE 78 
Authorization Procedure must be coqleted. If an ( 
proceed as follows: response is r--iv&, 
following responses are possible: 
- All TDBs will be output in numerical order of ports (1 
st first) 
PORJlNX=n>B of Port NNXdatawill be output 
= A.Uuna.ssigned trunk ports will be output 
TGPNN = All TDBs assigned to trunkgrc~pN~will be output, 
cm = AllCYaTrunkDataBlockswill beoutput 
FEX= All FxTnlnkDataBlockswill beoutput 
WA!?2 = 
All WATS TrunkData Blocks will be output 
TIE = 
All TIETrunkDataBlockswill bemtput 
DID = All DIDTmnkDataBlockswill be outmt 
CSA = All CCSATrunkData Blockswi.ll be output 
NIT = Output the Night Station Assignments for all CO, IX, and WATS trunks 
PVIJ= All PvLTrunkmtaBlockswill beoutput 
ctl x = 
Ignore line entered 
c&l H = 
Backspace 
DEL = Stop printing and return to REQ 
D&DEL= Abortprogram 
Authorization Procedure must be cqleted. 
If an OK response is receivedl 
proceed as follows:  
						

							NOV. a4 
PRCGRAMING (PRELIMINARY) 
Pm3 79 
NOTE l---The following responses are possible: 
L&RALL: All Least Cost Routing datablocks will be output. 
PAR: Miscelleaneous Paramhers Table will be output, 
AcTALr,J: All areacode tableswill bemtput. 
242mxWkAllareacode tables thatpointto route number (RN0) will be 
output. 
AOCAU: All area/office cede tables will be oUtput. 
OACWW Area/Office Code Table XX will be out@. 
ACCRNXX: All Area/Office Code Tables that point to route rmtber (RNO) XX will 
be output. 
CODXXX: All area code and area/office code tables relating to area code )[xx 
will be output. 
RTALIL: All Route Tables will be output. 
TGPXX: AllRouteTables usingTru&GroupXXwill 
tput . 
RTMDXX: 
All Rmte Tables using Modify Digit Table 
Modify Digits Table XX will be output. lbe output. 
MIzaxx: 
ctl. x = Ignore line entered 
Ctl H= 
BaCkspaCe 
DEL= Stop printing and return to 
DEL DEL= Abort program 
Authorization Promdure must be ccqleted. 
proceed as follows: If an CX response is received,  
						

							Nov.84 P 
NG (PE?ELIMINARY) PPGE 80 
t?DTE l-The followiq responses are possible: 
ALL= Output all Call Pick-up Groups listed by DN 
DNXXX= 
ctl x = List the 
numbers of all Call Pick-up Grmps containing DN 
Ignore line entered 
Ctl H= 
au=kspace 
DEL= Stop printing and return to KEQ 
DE&DEL= Abortprogram 
Authorization Procedure must be completed. 
proceed as follows: If an CK response is received, 
l--The following responses axe possible: 
ALL= Output all Hunting sequences 
DJXXX= 
Output all Hunts containing DN 
ctl x = Ignore line entered, 
Ctl H= Backspace 
DEL = Stop printing and return to m 
DE&DEL= Abort program 
Authorization Procedure must be mnpleted. If an OK response is 
received, proceed as follows: 
ram is loaded and durq is proceeding, 
is coqlete. 
3. Prcgram aborts automatically.  
						

							MOV. a4 
PRCXRAMEK (PEUZLMINARY) 
PAGE 81 
Authorization Procedure rmst be cmpleted. If an flOK response is 
received, proceed as follows: 
1, P&am is now active; proceed to 
tested, and enter % 
(*a351 and the following commands 
SPKR key off 1 AllL 
--- 
 --l key 2 
1 
I 
1 key 6 1;; 
I Dial kev 0 
I LED9=01 
Dial key * 
Dial kev # 
I Kev StriD 0 IKXDO=On I 
Strip 
2 ILED2 
Strip3 - 
, - IA \ - AA, 
I I c 
rizn (1 - nr, 17 - Ad=!= 
; 
J Key Strip 19 
1 LED 19 
= on (18 = off)  
						

							Nov. 84 PRrnNG (PFWXMINARY) 
P?GE 82 
* If an *OK response is 
active; proceed to the 
the following carnMnds sole 
to be tested, aRd 
Dial key 7 ICI OPR= on, STRl!VCT= on,Otherz 
J Dial key * 
1 ICIim=on, STAT- =( 
3ZR CALL I Associated LED = on. Others = off 
Key Strip 1 MSG I AsscciatedLED=on,Others=off 
I 
Kev StriD 2 HCXD I AllLEm=off 
Key Strip 2 EXCL SEX 1 Associated LED = on, Others = off 
Key Strip 2 EXCL DEST 1 Associated LED = on, Others = off 
I Key Strip 2 VEE?/CEG I Associated LED = on, Others = off