1991 1999 ford explorer chilton User Manual

							Click to enlarge
60/40 split seat-Explorer Click to enlarge
Remove the seat track insulator (Ranger passenger seat only).
1. 
Remove the 4 seat track-to-floorpan screws (2 each side) and lift the seat and track assembly from
the vehicle.
2. 
To remove the seat tracks from the seat cushion, position the seat upside down on a clean bench.
3. 
Disconnect the latch tie rod assembly and assist spring from the tracks.
4. 
Remove 4 track-to-seat cushion screws (2 each side) from the track assemblies. Remove the tracks
from seat cushion.
5. 
To install: Position the tracks to the seat cushion. Install the 4 track-to-seat cushion screws (2 each side) and
tighten.
6. 
Connect the latch tie rod assembly and assist spring to the tracks.
7. 
Position the seat and track assembly in the vehicle.
8. 
Install 4 track-to-floorpan screws and tighten to specification.
9. 
Install the seat track insulators (Ranger passenger seat only).
10.  HOW TO USE THIS BOOK
1134 REMOVAL & INSTALLATION 
						

							
Seat Belt Systems
REMOVAL & INSTALLATION
Seat belt system-Ranger with bench seatClick to enlarge
HOW TO USE THIS BOOK
Seat Belt Systems 1135 
						

							Seat belt system-Ranger with bucket seat
Click to enlarge
HOW TO USE THIS BOOK
1136 REMOVAL & INSTALLATION 
						

							Rear seat belts-Ranger Super Cab
Click to enlarge
HOW TO USE THIS BOOK
REMOVAL & INSTALLATION 1137 
						

							Outboard seat belts-Explorer
Click to enlarge
HOW TO USE THIS BOOK
1138 REMOVAL & INSTALLATION 
						

							Center seat belts-Explorer
Click to enlarge
HOW TO USE THIS BOOK
REMOVAL & INSTALLATION 1139 
						

							Rear seat belt system-Explorer
Click to enlarge
Remove the retaining bolt from the retractor assembly if applicable.
1. 
Lift the carpet as required, and remove the retaining bolt securing the assembly to the floorpan or side
panel.
2. 
Remove the bolt from the strap guide, if necessary, and remove the assembly from the vehicle.
3. 
Installation is the reverse of removal. Refer to the proper illustration for proper torque values.
4. 
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning. HOW TO USE THIS BOOK
1140 REMOVAL & INSTALLATION 
						

							
SPECIFICATION CHARTS
Torque SpecificationsClick to enlarge
SPECIFICATION CHARTS 1141 
						

							Torque Specifications
Click to enlarge
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning. HOW TO USE THIS BOOK
1142 SPECIFICATION CHARTS