Canon printer Color imageCLASS MF8450c User Manual

							Fax
5-40
Specifying Destinations
6 
Repeat step 4 and 5 until all the 
destinations are set.
Only one new destination can be specified. If 
you add destinations, specify them from 
Address Book.
You cannot specify the detail settings for each 
destination.
–
–
7 
Press  (Start).
Scanning starts if the original is placed in the 
feeder, and the scanned data is sent to the 
specified destination when scanning is 
complete.
To cancel scanning, press the left Any key to 
select  or press 
 (Stop).
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
–
–
9 
Press  (Start).
10
  Follow the instructions on the display, 
then press 
 (Start) once for each 
original.
11
  When scanning is complete, press the 
right Any key to select .
Scanning starts, and the scanned data is sent 
to the specified destination when scanning is 
complete.
To cancel scanning, press the left Any key to 
select  or press 
 (Stop).
–
– 
						

							Fax
5-41
Selecting Resolution
Selecting Resolution
You can specify the resolution before scanning the original. 
T
he default setting is .
The maximum size of an image that you can send at a resolution of 400 x 400 dpi is LGL.
For details on how to send the documents, see “Basic M ethods for Sending Faxes,” on p. 5-17.
–
–
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press 
[OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired resolution, then press [OK]. 
						

							Fax
5-42
Adjusting Density
Adjusting Density
You can adjust the density to the most appropriate level for the original manually.
Manual Exposure Adjustment 
You can manually adjust the scan exposure to the most appropriate level for the original.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Use [◀], [▶] or (Scroll Wheel) to adjust 
the density, then press [OK].
Move the indicator to the left to make the 
exposure lighter or move it to the right to make 
the exposure darker. 
						

							Fax
5-43
Adjusting Density
Adjusting Base Color 
This mode enables you to erase the background color of the original when scanning. This mode is especially 
useful for scanning originals such as catalogs and paper, that have turned yellow from age.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
1 
Press  (Main Menu). 
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Press the right Any key to select 
. 
						

							Fax
5-44
Adjusting Density
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
background setting, then press [OK].
: Does not erase the background color 
of the original.
: If you want to erase 
the background color of the original, 
following step is not necessary.
: If you want to 
make fine adjustments to the density of the 
background color, go to the next step.
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired color, then press [OK].
8 
Use [◀], [▶] or  (Scroll Wheel) to 
adjust the strength of the color, then 
press [OK].
If you adjust the strength of , the levels 
of  and  adjust automatically to 
the same level as . If you adjust the 
strength of  or , the  
level returns to its default level. –
–
–
9 
Press the right Any key to select . 
						

							Fax
5-45
Selecting Image Quality
Selecting Image Quality
You can manually select the original type according to the type of image that you are 
scanning. 
The default setting is .
Combinations of these three modes ( Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one of these 
modes, the previously set mode is canceled.
If you scan an original containing halftones, such as a printed image, using the  mode, the moiré effect (a shimmering, wavy 
pattern) may occur. In this case, you can lessen this moiré effect by using the sharpness mode. (See “A
djusting Sharpness,” on p. 5-83.)
If the original is a transparency, select the original type and adjust the exposure to the most appropriate level for the original.
For details on how to send the documents, see “Basic M
 ethods for Sending Faxes,” on p. 5-17.
–
–
–
–
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press [OK]. 
						

							Fax
5-46
Selecting Image Quality
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the image quality, then press [OK].
: This mode is best suited for 
scanning originals containing both text and 
photos such as magazines or catalogs.
: This mode is best suited for scanning 
text originals. Blueprints or pencil drawn 
originals can also be scanned clearly.
: This mode is best suited for 
scanning photos printed on photographic 
paper or photo originals containing halftones 
(e.g. printed photos).
–
–
– 
						

							Fax
5-47
2-Sided Original
2-Sided Original
You can set the machine to automatically turn over 2-sided originals that are placed in the 
feeder, and scan each side separately. 
The default setting is .
The 2-sided original mode cannot be used when sending a fax document in the direct sending or manual sending mode.
When you are scanning originals with a horizontal (landscape) orientation, such as LTRR, make sure to place them 
horizontally into the feeder. If these originals are placed vertically, the back sides of these originals are scanned upside 
down.
For details on how to send the documents, see “Basic M
ethods for Sending Faxes,” on p. 5-17.
–
–
–
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
If  or  has been selected,  is displayed. 
						

							Fax
5-48
2-Sided Original
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the type of original, then press [OK].
: 1-sided originals are scanned.
: The front and back 
sides of the original have the same top-
bottom orientation.
: The front and back 
sides of the original have opposite top-
bottom orientations.
–
–
– 
						

							Fax
5-49
Sending Originals at a Preset Time (Delayed Sending)
Sending Originals at a Preset Time (Delayed 
Sending)
The delayed sending mode enables you to store a send job in memory, and have it sent at a 
later time. 
The default setting is .
You can reserve up to 70 jobs for the delayed sending. However, the actual number of jobs that can be reserved may be 
less than 70, depending on the following conditions:If multiple documents are being sent at the same time.
If large documents are being sent.
If there are jobs other than delayed sending.
Once the delayed documents are sent, the documents are automatically deleted from memory.
You can check the status or cancel the transmission of jobs for which a preset send time has been specified. (See 
“Checking/Deleting Fax Transmission Documents,” on p. 5-138.)
–
•
•
•
–
–
1 
Place your originals.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].