Canon printer Color imageCLASS MF8450c User Manual

							Scanning
8-10
Basic Scanning Operations 
						

							Network
9-1
 
Flowchart for Setting Up Network ............................. 9-2
What is the Network?  .................................................. 9-3
Overview of Network Functions  ................................. 9-4
This chapter describes what the network is, what you can do with the network, and what you have to do to use the 
machine with the network.
Network
Chapter
9    
						

							Network
9-2
Flowchart for Setting Up Network
Flowchart for Setting Up Network
Follow the procedures in the flowchart below to set up each network function.  
						

							Network
9-3
What is the Network?
What is the Network?
In the computer field, a network is a system of interconnected computers that communicate 
with each other. “Internet” and “LAN” are the two most common words used to refer to 
networks. The Internet is the vast network to which computers all over the world are 
connected. Computers connected to the Internet anywhere in the world can exchange 
information with one another. On the other hand, LAN is the abbreviation for “Local Area 
Network” and means a network within a limited area (in an office, for example). 
						

							Network
9-4
Overview of Network Functions
Overview of Network Functions
This section describes actions you can perform using the network function. 
						

							Settings from a PC
10-1
 
Settings from a PC
This chapter describes how to use the Remote UI functions.
Overview of Remote UI .............................................10-2
Starting the Remote UI..............................................10-4
Settings from a 
PC
Chapter
10    
						

							Settings from a PC
10-2
Overview of Remote UI
Overview of Remote UI
Remote UI enables you to check the machine’s status and manage the machine’s functions 
from a computer on the network using a web browser. Using the computer keyboard, the 
management process, such as entering addresses to the address book will be easier. 
						

							Settings from a PC
10-3
Overview of Remote UI
Checking the Device 
Information from a computer
The Remote UI enables you to check 
the device information. Accessing to 
the device information from the 
distant place provides you with easy 
device management.
For details, see “Checking Device 
Status and Information” in the e-
Manual.
Managing jobs from a 
computer
The Remote UI enables you to manage 
print jobs and view job logs. 
Accessing to the print job information 
from the distant place provides you 
with easy job management.
For details, see “Job Management” in 
the e-Manual.
Editing the Address Book 
from a computer
The Remote UI enables you to make 
additions and changes to each item of 
the address book. You can use the PC 
keyboard, so entering a lot of 
addresses to the address book will be 
easier.
For details, see “Managing the 
Address Book” in the e-Manual.
Setting/registering from a 
computer
The Remote UI enables you to specify 
the machine’s system settings. You can 
specify the various custom system 
settings more easily and speedy.
For details, see “Customizing System 
Settings” in the e-Manual.
By using remote UI you can set and confirm following functions.  
						

							Settings from a PC
10-4
Starting the Remote UI
Starting the Remote UI
To start the Remote UI, follow the procedure described below.
1 
Prepare the Network.
Set up the machine for use in a network, then 
connect the machine and the computer to your 
network router or a hub.
For details, see “Setup Computers and Software,” 
in the Starter Guide.
2 
Start the web browser. 
3 
Enter the IP address of the machine in 
[Address] or [Location], then press [Enter] 
on the keyboard.
For details on how to check the IP address, see 
“Setting and Checking the IP Address,” in the e-
Manual.
The Remote UI screen appears.
4 
Enter the required data.
The required data differ depending on the 
authentication mode you are using.
■In case of default settings:
①
 Select [System Manager Mode] or [End-User 
Mode]. 
						

							Settings from a PC
10-5
Starting the Remote UI
② For System Manager Mode, click OK. For 
End-User Mode, enter the User Name and 
click OK.
■ In case system manager ID and password is 
set:
①

  Select [System Manager Mode] or [End-User 
Mode].
②  For System Manager Mode enter the 
System Manager ID and the Password, and 
click OK. For End-User Mode, enter the User 
Name and click OK.
■ For Department ID Management mode:
①
  Enter the Department ID and Password, and 
click OK.