Canon printer Color imageCLASS MF8450c User Manual

							Fax
5-80
Printing the TX Terminal ID
Printing the TX Terminal ID 
The TX Terminal ID setting enables you to specify whether the Terminal ID information is 
printed at the top of every document that you send via fax. Information such as your fax 
number and name is printed, enabling the recipient to know who sent the document.
The default settings are as follows:: On
: Outside
: Fax
–
–
–
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK]. 
						

							Fax
5-81
Printing the TX Terminal ID
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
: Does not print the Terminal ID 
information. If you select  and press 
[OK], go to step 13.
: Prints the Terminal ID information. If 
you select  and press [OK], press [OK] 
again, then go to the next step.
8 
Press the right Any key to select 
.
–
–
9 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
10
  Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
: The Terminal ID information is 
printed inside the image area on the 
recipient’s paper.
: The Terminal ID information is 
printed outside the image area on the 
recipient’s paper.
11
  Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
–
– 
						

							Fax
5-82
Printing the TX Terminal ID
12
 Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
: “FAX” is printed before the fax number.
: “ TEL” is printed before the telephone 
number.
13
  Press  (Main Menu) to return to the 
Main Menu screen.
–
– 
						

							Fax
5-83
Adjusting Sharpness
Adjusting Sharpness
This mode enables you to scan original images with a sharper or softer contrast. 
The default setting is .
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK]. 
						

							Fax
5-84
Adjusting Sharpness
7 
Use [◀], [▶] or  (Scroll Wheel) to slide 
the indicator towards  or , 
then press [OK].
: To scan originals containing printed 
images or other halftones, the setting should 
be towards . This setting lessens the 
moiré effect (a shimmering, wavy pattern).
: To scan text or lines clearly, the 
setting should be towards . This 
setting is particularly suited for scanning 
blueprints and faint pencil drawn images.
8 
Press  (Main Menu) to return to the 
Main Menu screen.
–
– 
						

							Fax
5-85
Specifying What to Display on the Screen for a Send Operation
Specifying What to Display on the Screen for 
a Send Operation
This mode enables you to specify what screen is displayed for a send operation. When you 
select  on the Main Menu screen and press [OK], the screen specified here is 
displayed for a send operation. 
The default setting is .
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK]. 
						

							Fax
5-86
Specifying What to Display on the Screen for a Send Operation
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
the initial screen, then press [OK].
: The Set Favorites screen is 
displayed on the initial Send screen.
: The One-touch Selection/Clear 
screen is displayed on the initial Send screen.
: The Select Send Type 
screen is displayed on the initial Send screen.
8 
Press  (Main Menu) to return to the 
Main Menu screen.
–
–
– 
						

							Fax
5-87
Restoring the Send Function Settings to Their Default
Restoring the Send Function Settings to 
Their Default
You can restore almost all of the Send Function Settings to their default settings.
You cannot initialize  and . ( is disabled for the fax functions.)
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK]. 
						

							Fax
5-88
Restoring the Send Function Settings to Their Default
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
8 
Press  (Main Menu) to return to the 
Main Menu screen. 
						

							Fax
5-89
Send Start Speed
Send Start Speed
This function enables you to change the send start speeds, which is useful when there is 
difficulty initiating the sending of a document. 
The default setting is .
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
If the System Manager ID and System Password 
have been set, enter the System Manager ID and 
System Password using 
  –  (numeric keys), 
then press 
 (Log In/Out) to enter the System 
Management Settings menu.
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].