Garmin G1000 Manual

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A547
ADDITIONAL FEATURES
Selecting the WX Softkey	shows	the	airport	 weather	 frequency	 information,	 and	includes	 weather	data	such	
as	METAR	 and	TAF	 from	 the	SiriusXM	 Data	Link	 Receiver,	 when	available.	 	 Weather	information	 is	available	
only	 when	 an	SiriusXM	 Data	Link	 Receiver	 is	installed	 and	the	XM	 WX	 Satellite	 Weather	 subscription	 is	current.
Figure 8-31  Weather Information Page
WX Softkey 
Selected
WX Info 
When 
Available
 NOTE:  A subdued softkey label indicates the function is disabled.
 NOTE:  Only NOTAMs applicable to specific information conveyed on the displayed Jeppe\
sen chart are 
available when the NOTAM Softkey is selected.  There may be other NOTAMs available pertaining to the 
flight that may not be displayed.  Contact Jeppesen for more information regarding Jeppesen database-
published NOTAMs.
Recent	 NOTAMS	 applicable	 to	the	 current	 ChartView	 cycle	are	included	 in	the	 ChartView	 database.		Selecting	
the NOTAM Softkey	shows	the	local	 NOTAM	 information	 for	selected	 airports,	 when	available.		 When	NOTAMS	
are	not	 available,	 the	NOTAM	Softkey	 label	appears	 subdued	 and	is	disabled	 as	shown	 in	Figure	 8-31.	 	The	
NOTAM	Softkey	may	appear	on	the	Airport	Information	Page	and	all	of	the	chart	page	selections.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A548
ADDITIONAL FEATURES
Figure 8-32  NOTAM Available
NOTAM Softkey 
Appears for 
Selected Airports
Figure 8-33  Airport Information Page, Local NOTAMs
Local 
NOTAM on 
This Airport 
NOTAM Softkey 
Selected
Selecting the NOTAM Softkey	again	removes	the	NOTAMS	information.
Selecting the GO BACK Softkey	 reverts	to	the	 previous	 page	(Navigation	 Map	Page,	 Nearest	 Pages,	or	Flight	
Plan	Page).  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A549
ADDITIONAL FEATURES
CHART OPTIONS
Selecting the CHRT OPT Softkey	displays	the	next	level	of	softkeys,	the	chart	options	level	(Figure	8-20).
Selecting the ALL Softkey	shows	the	entire	approach	chart	on	the	screen.
Complete 
Chart 
Shown
Figure 8-34  Approach Information Page, ALL View  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A550
ADDITIONAL FEATURES
Selecting the HEADER Softkey	shows	the	header	view	(approach	chart	briefing	strip)	on	the	screen.
Approach 
Chart 
Briefing Strip
Figure 8-35  Approach Information Page, Header View
Selecting the PLAN Softkey	shows	the	approach	chart	two	dimensional	plan	view.
Figure 8-36  Approach Information Page, Plan View
Approach 
Chart Plan 
View  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A551
ADDITIONAL FEATURES
Selecting the PROFILE Softkey	displays	the	approach	chart	descent	profile	strip.
Approach 
Chart Descent 
Profile Strip
Figure 8-37  Approach Information Page, Profile View, Full Screen Width
Selecting the MINIMUMS Softkey	 displays	 the	minimum	 descent	altitude/visibility	 strip	at	the	 bottom	 of	the	
approach	chart.
Minimum 
Descent 
Altitude/
Visibility Strip
Figure 8-38  Approach Information Page, Minimums View, Full Screen Width  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A552
ADDITIONAL FEATURES
If	the	 chart	 scale	has	been	 adjusted	 to	view	 a	small	 area	of	the	 chart,	 selecting	 the	FIT WIDTH	Softkey	
changes	the	chart	size	to	fit	the	available	screen	width.
Select FIT WDTH 
Softkey to Show  Full Chart Width
Figure 8-39  Airport Information Page, FIT WDTH Softkey Selected  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A553
ADDITIONAL FEATURES
Selecting the FULL SCN Softkey	alternates	between	removing	and	replacing	the	data	window	to	the	right.
Selecting Additional  Information:
1) While viewing the Airport Taxi Diagram, select the FULL SCN Softkey to display the information windows 
(AIRPORT, INFO).
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the AIRPORT, INFO, RUNWAYS, or FREQUENCIES Box (INFO Box shown).
4) Turn the small FMS Knob to select the INFO Box choices.  If multiple choices are available, scroll to the desired 
choice with the large FMS Knob and press the ENT Key to complete the selection.
5) Press the FMS Knob again to deactivate the cursor.
Figure 8-40  Airport Information Page, Full Screen and Info Window
Select FULL SCN 
Softkey to Switch 
Between Chart on Full 
Screen and Chart with  Info Window Available 
Information
Selecting the BACK Softkey,	or	waiting	for	45	seconds	reverts	to	the	chart	selection	softkeys.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A554
ADDITIONAL FEATURES
The	full	screen	view	can	also	be	selected	by	using	the	page	menu	option.
Selecting full screen On or Off:
1) While viewing a terminal chart press the MENU Key to display the Page Menu OPTIONS.
2) Turn the large FMS Knob to highlight the Chart Setup Menu Option and press the ENT Key.
3) Turn the large FMS Knob to move between the FULL SCREEN and COLOR SCHEME Options.
4) Turn the small FMS Knob to choose between the On and Off Full Screen Options.
Figure 8-41  Page MenusFull Screen On/Off Selection
Chart Setup Option  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A555
ADDITIONAL FEATURES
DAY/NIGHT VIEW
ChartView	can	be	displayed	 on	a	white	 or	black	 background	 for	day	 or	night	 viewing.		 The	Day	 View	 offers	
a	better	 presentation	 in	a	bright	 environment.		 The	Night	 View	gives	 a	better	 presentation	 for	viewing	 in	a	dark	
environment.		When	the	CHART	SETUP	Box	is	selected	the	G1000	softkeys	are	blank.
Selecting Day,  Night,  or Automatic View:
1) While viewing a terminal chart press the MENU Key to display the Page Menu OPTIONS.
2) Turn the large FMS Knob to highlight the Chart Setup Menu Option and press the ENT Key.
Figure 8-42  Waypoint Information Page, OPTIONS Menu
3) Turn the large FMS Knob to move to the COLOR SCHEME Option (Figure 8-43).
4) Turn the small FMS Knob to choose between Day, Auto, and Night Options.
5) If Auto Mode is selected, turn the large FMS Knob to select the percentage field.  Use the small FMS Knob to 
change the percentage value.  The percentage value is the day/night crossover point based on the percentage of 
backlighting intensity.  For example, if the value is set to 15%, the day/night display changes when the display 
backlight reaches 15% of full brightness.
   The display must be changed in order for the new setting to become active\
.  This may be accomplished by 
selecting another page or changing the display range.
6) Press the FMS Knob when finished to remove the Chart Setup Menu.  
						

							Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04  Rev. A556
ADDITIONAL FEATURES
Figure 8-43  Arrival Information Page, Day View
Figure 8-44  Arrival Information Page, Night View