Konica Minolta bizhub 211 User Manual

							Advanced copy operations6
bizhub 163/211 6-13
3Press the [+] or [,] key until 2in1 or 4in1 is selected, and then press 
the [OK] key.
– Two page arrangements are available for 4in1 copies.
The manufacturer’s default setting is PATTERN1.
– For details on specifying the setting, refer to Selecting the 4in1 
page order (4IN1 COPY ORDER parameter) on page 7-76.
The indicator on the [Combine Original] key lights up.
4If necessary, specify any other copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
5Using the keypad, type in the desired number of copies, and then press 
the [Start] key.
– If multiple copies are to be printed, press the [Finishing] key, and 
then select SORT.
COMBINE ORIGINAL
2in1
OFF
4in1
Pattern 1 Pattern 2
Downloaded From ManualsPrinter.com Manuals 
						

							6Advanced copy operations
6-14 bizhub 163/211
6.3 Making double-sided copies
Double-sided copies in addition to 2in1 and 4in1 double-sided copies can be 
made from single-sided or double-sided documents.
2
Note 
The optional duplex unit must be installed. (bizhub 211 only)
The type of double-sided copy that can be made depends on the options 
that are installed.
When copying double-sided documents, use reverse automatic 
document feeder DF-605.
Types of double-sided copying
Double-sided copy methodsOriginal cover 
OC-504Automatic doc-
ument feeder 
DF-502Reverse 
automatic docu-
ment feeder 
DF-605
Single-sided documents % 
Double-sided copyooo
Double-sided document % 
Double-sided copyo*eo
Single-sided documents % 2in1 
double-sided copyooo
Single-sided documents % 4in1 
double-sided copyooo
2
1
1
1
2
1
1
2
1
1
2
1
1
4
1
3
1
2
1
1
13122 1
8
11
1
7344 3
122 1
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced copy operations6
bizhub 163/211 6-15
* To copy double-sided documents using the original glass, press the [Simplex/Duplex] key, and 
then select 1-SIDE%2-SIDE to scan the front and back sides of the document in order.
Precautions on double-sided copying
Double-sided copying is not possible under the following conditions:
-Double-sided documents are loaded into the automatic document 
feeder.
-Documents of mixed widths are loaded into the document feeder.
-The manual bypass tray is selected.
-Special paper (cards, OHP transparencies, envelopes, or label sheets) is 
loaded.
-The paper type setting is 1-SIDE.
-Paper with a width less than 140 mm is selected.
Double-sided documents % 2in1 
double-sided copieso*eo
Double-sided documents % 4in1 
double-sided copieso*eo
Double-sided copy methodsOriginal cover 
OC-504Automatic doc-
ument feeder 
DF-502Reverse 
automatic docu-
ment feeder 
DF-605
7
1
5
1
3
12
1
17126 53122 1
2
15
2
1
1
1534
12312
109
7344 3
122 1
Downloaded From ManualsPrinter.com Manuals 
						

							6Advanced copy operations
6-16 bizhub 163/211Using the original glass
1Position the first page of the 
document on the original glass.
2Press the [Simplex/Duplex] key.
3Press the [+] or [,] key until 1-SIDE % 2-SIDE is selected, and then 
press the [OK] key.
4If necessary, specify any other copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
5Using the keypad, type in the desired number of copies, and then press 
the [Start] key.
SIMPLEX/DUPLEX
1-SIDE1-SIDE
1-SIDE2-SIDE
2-SIDE1-SIDE
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced copy operations6
bizhub 163/211 6-17
6Place the next document page on the original glass, and then press the 
[OK] key.
– Repeat this step for all pages of the document.
7Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							6Advanced copy operations
6-18 bizhub 163/211Using the document feeder
1Load the document into the 
document feeder.
2Press the [Simplex/Duplex] key.
3Press the [+] or [,] key until 1-SIDE%2-SIDE is selected, and then 
press the [OK] key.
4If necessary, specify any other copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
5Using the keypad, type in the desired number of copies.
6Press the [Start] key.
SIMPLEX/DUPLEX
1-SIDE1-SIDE
1-SIDE2-SIDE
2-SIDE1-SIDE
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced copy operations6
bizhub 163/211 6-19
6.4 Making copies using the BOOK SEPARATION 
function
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Press the [Function] key.
The COPY FUNCTION menu 
appears.
3Press the [+] or [,] key until BOOK SEPARATION is selected, and 
then press the [OK] key.
Documents Copies
COPY FUNCTION
BOOK SEPARATION
NEG.
RETURN
POS.
Downloaded From ManualsPrinter.com Manuals 
						

							6Advanced copy operations
6-20 bizhub 163/211
4Press the [+] or [,] key until ON is selected, and then press the [OK] 
key.
– The document type can be changed in the Utility mode. The default 
binding setting is for left-bound books. To copy right-bound books, 
change the document type using the BINDING POSITION 
parameter in the Utility mode. (Refer to Selecting the book binding 
position (BINDING POSITION parameter) on page 7-66.)
/ appears beside BOOK SEPARATION in the COPY FUNCTION 
menu.
5To erase around the text or along the binding, select ERASE in the 
COPY FUNCTION menu, and then press the [OK] key.
– To begin copying, continue with step 7.
BOOK SEPARATION SET
ON
OFF
ALIGN BOOK TO CENTER
COPY FUNCTION
PAGE MARGIN
ERASE
X/Y ZOOM
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced copy operations6
bizhub 163/211 6-21
6Press the [+] or [,] key until FRAME ERASE, CENTER ERASE or 
CENTER+FRAME ERASE is selected, and then press the [OK] key.
– For details on the areas that are erased, refer to Frame/center 
erasing methods on page 6-22.
– The width of the erased area for the FRAME ERASE setting can be 
set between 5 and 20 mm, in 1 mm increments. The manufacturer’s 
default setting is 10 mm.
– The width of the erased area for the CENTER ERASE setting is fixed 
at 10 mm.
– The width of the erased area for the FRAME ERASE setting can be 
changed using the ERASE SETTING parameter in the Utility mode. 
(Refer to Adjusting the width of the erased area (ERASE 
SETTING parameter) on page 7-69.)
/ appears beside ERASE in the COPY FUNCTION menu.
7Press the [Back] key.
The main screen appears again.
8If necessary, specify any other copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
9Using the keypad, type in the desired number of copies, and then press 
the [Start] key.
ERASE SETTING
FRAME ERASE
OFF
CENTER ERASE
ERASE SETTING
CENTER+FRAME ERASE
Downloaded From ManualsPrinter.com Manuals 
						

							6Advanced copy operations
6-22 bizhub 163/211Frame/center erasing methods
ERASE settingsDescriptionFinish
FRAME ERASE
(book frame
erased)Copies are printed with 
the frame around the 
document erased.
CENTER ERASE
(book center
erased)Copies are printed with 
the area along the 
binding erased.
CENTER+FRAME 
ERASE
(book frame +center 
erased)Copies are printed with 
the frame around the 
document and along 
the binding erased.
Documents Copies
Documents Copies
Documents Copies
Downloaded From ManualsPrinter.com Manuals