Konica Minolta bizhub 211 User Manual

							Introduction1
bizhub 163/211 1-9Documents
Mixed document widths
For details, refer to page 4-22.
Downloaded From ManualsPrinter.com Manuals 
						

							1Introduction
1-10 bizhub 163/211
1.4 Explanation of manual conventions
The marks and text formats used in this manual are described below.
Safety advices
6 DANGER
Failure to observe instructions highlighted in this manner may result in 
fatal or critical injuries in fact of electrical power.
%Observe all dangers in order to prevent injuries.
7 WARNING
Failure to observe instructions highlighted in this manner may result in 
serious injuries or property damage.
%Observe all warnings in order to prevent injuries and to ensure safe use 
of the machine.
7 CAUTION 
Failure to observe instructions highlighted in this manner may result in 
slight injuries or property damage.
%Observe all cautions in order to prevent injuries and to ensure safe use 
of the machine.
Sequence of action
1The number 1 as formatted here 
indicates the first step of a sequence 
of actions. 
2Subsequent numbers as formatted 
here indicate subsequent steps of a 
sequence of actions.
?Text formatted in this style 
provides additional assistance. 
%Text formatted in this style describes the action that will ensure the 
desired results are achieved. 
An illustration inserted 
here shows what operations 
must be performed.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction1
bizhub 163/211 1-11Tips
2
Note 
Text highlighted in this manner contains useful information and tips to 
ensure safe use of the machine.
2
Reminder 
Text highlighted in this manner contains information that should be 
reminded.
!
Detail 
Text highlighted in this manner contains references for more detailed 
information.
Special text markings
[Stop] key
The names of keys on the control panel are written as shown above.
MACHINE SETTING
Display texts are written as shown above.
Downloaded From ManualsPrinter.com Manuals 
						

							1Introduction
1-12 bizhub 163/211
1.5 Descriptions and symbols of documents and paper
The descriptions and symbols used in this manual for documents and paper 
are explained below.
Output side and feed direction
Paper is fed through this machine along the right side, positioned with the 
side to be copied or printed on facing down, then fed out into the output tray 
at the top of the machine. The direction in which paper is fed (indicated by 
arrows in the following illustration), is called the feed direction.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction1
bizhub 163/211 1-13Width and length
Whenever paper dimensions are 
mentioned in this manual, the first value 
always refers to the width of the paper 
(shown as X in the illustration), and the 
second value refers to the length (shown 
as Y).
Paper orientation
Lengthwise (w)
If the length (Y) is longer than the width (X), 
the paper orientation is indicated by w.
Crosswise (v)
If the length (Y) is shorter than the width (X), 
the paper orientation is indicated by v.
Downloaded From ManualsPrinter.com Manuals 
						

							1Introduction
1-14 bizhub 163/211
1.6 Legal restrictions on copying
Certain types of documents must not be copied with the purpose or intent to 
pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to 
responsible copying.
Financial instruments
-Personal checks
-Travelers checks
-Money orders
-Certificates of deposit
-Bonds or other certificates of indebtedness
-Stock certificates
Legal documents
-Food stamps
-Postage stamps (canceled or uncanceled)
-Checks or drafts drawn by government agencies
-Internal revenue stamps (canceled or uncanceled)
-Passports
-Immigration papers
-Motor vehicle licenses and titles
-House and property titles and deeds
General
-Identification cards, badges, or insignias
-Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or 
foreign currencies, or works of art, without permission of the copyright 
owner.
When in doubt about the nature of a document, consult with legal counsel.
Downloaded From ManualsPrinter.com Manuals 
						

							2Installation and operation 
precautions
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							Installation and operation precautions2
bizhub 163/211 2-3
2 Installation and operation precautions
2.1 Safety information
This section contains detailed instructions on the operation and maintenance 
of this machine. To achieve optimum utility of this device, all operators 
should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the 
supply. It contains important information related to user safety and 
preventing equipment problems.
Please keep this manual in a handy place near the machine.
Make sure you observe all of the precautions appear in each section of this 
manual.
KM_Ver.01E_C
2
Note 
Some parts of the contents of this section may not correspond with the 
purchased product.
Warning and precaution symbols 
The following indicators are used on the warning labels or in this manual to 
categorize the level of safety warnings.
7 WARNING
Ignoring this warnings could cause serious injury or even death.
%Do not ignore this safety advices.
7 CAUTION 
Ignoring this cautions could cause injury or damage to property.
%Do not ignore this safety advices.
Downloaded From ManualsPrinter.com Manuals 
						

							2Installation and operation precautions
2-4 bizhub 163/211Meaning of symbols
Disassemble and modification
7 WARNING
Ignoring this warnings could cause serious injury or even death.
%Do not ignore this safety advices.
SymbolMeaningExampleMeaning
A triangle indicates a danger 
against which you should take 
precaution.This symbol warns against pos-
sible causes of burns.
A diagonal line indicates a pro-
hibited course of action.This symbol warns against dis-
mantling the device.
A black circle indicates an im-
perative course of action.This symbol indicates you must 
unplug the device.
WarningSymbol
• Do not attempt to remove the covers and panels which have 
been fixed to the product. Some products have a high-volt-
age part or a laser beam source inside that could cause an 
electrical shock or blindness.
• Do not modify this product, as a fire, electrical shock, or 
breakdown could result. If the product employs a laser, the 
laser beam source could cause blindness.
Downloaded From ManualsPrinter.com Manuals