NEC Neax 2400 Ipx Office Data Specification

NDA-24298 CHAPTER 4
Page 867
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
ACTKC: Assignment of Connection Trunk Data for LDM
1. General
This command assigns and deletes the connection trunk data for B-channel/D-channel route by designating the
range of trunk numbers and LENS.
2. Precautions
1. This command can be used only when the PBX and the MAT are connected in on-line state.
3. Data Entry Instruction
Note 1:When “Delete” is selected in “KIND” box, the data for “C_RT”, “C_TK” and “STEP”...

CHAPTER 4 NDA-24298
Page 868
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
[Details on Trunk Arrangement “TYPE”]
When assigning the consecutive trunk data using the ACTKC command, you must select the trunk arrangement
type (1-6) in the “TYPE” parameter.
The following examples apply when the 16 COT circuit cards are accommodated:
TYPE=1 (Level → Group → Unit)
Trunk data is arranged in the following numerical order:
U=2
00
PIM C/EU=3
05 10 15 20
16
C
O
PIM C/E
U=0U=1
T
16
C
O
T 16
C
O
T16
C...

NDA-24298 CHAPTER 4
Page 869
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=2 (Level → Unit → Group)
Trunk data is arranged in the following numerical order:
TYPE=3 (Group → Level → Unit)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1 LV 2 LV 3
LV 4
LV 5
LV 6
LV 71
2 3 4
5
6
7
8
0233 40
0381 88
0565 72
04
17 2449
56
05 06
U=2
U=0
03 02 9 16
00
41 48
01
57 6425
32
16 15
U=3
U=1
73 8089
96
Group No. Level No.
1MGSlot No.
LV 7...

CHAPTER 4 NDA-24298
Page 870
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=4 (Group → Unit → Level)
Trunk data is arranged in the following numerical order:
TYPE=5 (Unit → Level → Group)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71 13 85
024 88
05 7 91
8 92
05 06
U=2
U=0
03 02 5 89
006 90
01 9 93
16 15
U=3
U=1
12 96
Group No. Level No.
1MGSlot No.
16 17 18
2
033
04 19 20 21 24
LV 7
LV 6
LV 5...

NDA-24298 CHAPTER 4
Page 871
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
TYPE=6 (Unit → Group → Level)
Trunk data is arranged in the following numerical order:
LV 7
LV 6
LV 5
LV 4
LV 3
LV 2
LV 1
LV 0
LV 0 LV 1
LV 2
LV 3
LV 4
LV 5
LV 6
LV 71 13 85
0211 95
05 3 87
7 91
05 06
U=2
U=0
03 02 2 86
006 90
01 4 89
16 15
U=3
U=1
12 96
Group No. Level No.
1MGSlot No.
23 14 18
5
039
04 15 19 16 24
92 94
20 22
810
17 21 89 93 

CHAPTER 4 NDA-24298
Page 872
Issue 1
ACTKC : Assignment of Connection Trunk Data for LDM
4. Data Sheet
CONNECTION 
ROUTE
NUMBER 
(C_RT) 
1-1023CONNECTION 
TRUNK 
NUMBER
 (C_TK) 1-4095COUNT 
UP 
STEP 
(STEP) 
1-10CONNECTION
EQUIPMENT
NUMBER
(C_LENS)GROUP
NUMBER 
(GROUP) 
0-31LEVEL
NUMBER 
(LEVEL)
 0-7COUNT 
UP 
TYPE 
(TYPE) 
1-6STATUS
START END START END
START END START END 

NDA-24298 CHAPTER 4
Page 873
Issue 1
AFCH : Assignment of FCCH Number for Local Data Memory
AFCH: Assignment of FCCH Number for Local Data Memory
1. General
This command assigns the FCCH card that provides the D-channel in the Fusion Network link.
2. Precautions
1. Before executing this command, the trunk for D-channel should be assigned by the ACRD/ACTK
commands.
2. Use sequential numbers starting from 1 at each node.
3. Assign odd numbers for Group and 0 (zero) for Level in the parameter FCHEN.
4. For...

CHAPTER 4 NDA-24298
Page 874
Issue 1
AFCH : Assignment of FCCH Number for Local Data Memory
4. Data Sheet
FCCH NUMBER (FCHN)
1-255LENS OF FCCH (FCHEN)
REMARKS
MG U G L
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 

NDA-24298 CHAPTER 4
Page 875
Issue 1
AFPC : Assignment of FCCH Routing Data for Local Data Memory
AFPC: Assignment of FCCH Routing Data for Local Data Memory
1. General
This command assigns the B-channel and the D-channel data for each FPC.
2. Precautions
1. The maximum number of alternative connection trunks is 8 for 1 FPC.
2. The maximum number of the alternative FCH cards is 8 for 1 destination FPC.  (In Fusion Link using the
FCH card.)
3. The maximum number of the alternative FPCs is 8 for 1...

CHAPTER 4 NDA-24298
Page 876
Issue 1
AFPC : Assignment of FCCH Routing Data for Local Data Memory
3. Data Entry Instructions
Note 1:“USE_GATE” data is automatically set and this parameter won’t appear on the MAT display.
Note 2:It depends on the assignment on P_ROUTE parameter, whether the direct connection or FCH connection
routing is selected.
In redundant configuration of internal LAN, #A/#B system changeover is to be activated in case all the
routes, both for direct connection and FCH connection, are...