Panasonic Digital Color Imaging System DP-C106 Operating Instructions

							Basic Copying
19
5.  Return the Document Tray to the original position.
6.  If you are loading large size originals into the ADF, pull out the Exit Tray
Extension of the Document Exit Tray.
CAUTION
Pay attention to the following cautions when using the ADF:
•  Do not press on the originals while using the ADF; this could cause a
paper jam.
•  Do not let more than 30 sheets stack on the Document Exit Tray.  Do not
place any objects on the Document Exit Tray.  Both actions could cause
a paper jam.
The ADF accepts all paper sizes between 8.5 x 11 inch or B5 (182 x 257 mm)
and 11 x 17 inch and A3 (297 x 420 mm).  The ADF accepts all paper weights
between 38 and 128 gsm or between 10 and 34 lb.  To copy an original that is
not within these specifications, you must use the Document Glass.
For specific information on media regulations for the ADF, go to the
Technical Data in CDs Operating Instructions.
The ADF does not accept jobs with mixed size originals.
0302513A -W O L
03 02 51 6A -W O L 
						

							Basic Copying
20
Making a Copy
Perform the following steps to make a copy on the DP-C106:
1.  If the Copier/Printer is in printer mode, press the Copy button.
2. Press the Clear All button to reset all default settings.
The settings for all of the copy features are not displayed on the Main
Screen.  Feature settings may be altered from a previous copy job.  Press
the Clear All button to ensure that all copy features are on the default
settings.
3.  Position the originals on the Document Glass or in the ADF.
4.  Select the desired number of copies using the Numeric Keypad.  If you
enter the wrong number, press the Clear button.
5.  Press the Start button.
For directions on applying additional copy features, go to the Copy Features. 
						

							21
Copy Features
The following copy features are available on the DP-C106 Copier/Printer:
• Reduce/Enlarge Options
• Paper Supply Selection
•  Original Type Selection
• Lighten/Darken Adjustment
• Quality Adjustment
• Advanced Features
This chapter provides detailed information about using each of these features.
Reduce/Enlarge
The Reduce/Enlarge button allows you to increase or decrease the size of the
original image onto your copy output. Selecting a Reduce/Enlarge percentage
on the Copier Control Panel specifies a desired change in the original image
size.
The following Reduce/Enlarge options are available on your DP-C106
Copier/Printer:
•  100 % - The copy image will be the same size as the original image.
• Auto % - The DP-C106 Copier/Printer automatically detects original
document size. After you select your desired paper output size, the
Copier/Printer reduces or enlarges the image to fit onto the output paper.
3 
						

							Copy Features
22
•  Preset % - The Preset % settings are shown on the Copier Control
Panel. The Copier/Printer automatically determines output size based on
the selected reduction or enlargement percentage.
The following tables list the Preset % selections available on the DP-
C106 and how each percentage affects certain paper sizes.
•  Manual % selections - The Zoom (       ) ARROW buttons allow you to
set a manual zoom percentage between 25% and 400%. The manual
zoom percentage displays on the Copier Screen.
Using the Reduce/Enlarge Feature
Follow these steps to make a copy using the Reduce/Enlarge feature:
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3.  Position the original on the Document Glass or in the ADF.
For information on positioning documents on the Document Glass or using
the ADF, go to the Basic Copying.
PercentagePaper Sizes
64%
11 x 17 in → 8.5 x 11 in
78%
8.5 x 14 in → 8.5 x 11 in
129%
8.5 x 11 in → 11 x 17 in
154%
5.5 x 8.5 in → 8.5 x 14 in
200%
5.5 x 8.5 in → 11 x 17 in
PercentagePaper Sizes
70 %
A3 → A4
81%
B4 → A4
86%
A3 → B4; A4 → B5
115%
B4 → A3; B5 → A4
141%
B5 → B4
U.S. Preset % selections International Preset % selections 
						

							Copy Features
23
4.  Perform one of the following:
• Use the Reduce/Enlarge (        ) ARROW buttons to select 100 %
to produce a copy that is the same size as the original document.
• Use the Reduce/Enlarge (        ) ARROW buttons to select Auto%.
• Use the Reduce/Enlarge (        ) ARROW buttons to select a
Preset % reduction/enlargement setting.
• Use the Zoom (        ) ARROW buttons to select a Manual %
reduction or enlargement percentage.
You can enter any percent between 25 % and 400 %.
5.  If you selected Auto %, select a desired Paper Supply.
You cannot use the Auto Paper Supply selection with the Auto %
Reduce/Enlarge option. You must select a specific Paper Supply when using
the Auto % Reduce/Enlarge option. Information on the Paper Supply feature
is provided in the next section.
You cannot select an Enlarge value greater than 100% when Auto Paper
Supply is selected. You must manually select the appropriate Paper Supply.
6.  Select the desired number of copies using the Numeric Keypad.
7. Press the Start button. 
						

							Copy Features
24
Paper Supply
The Paper Supply feature allows you to select the desired paper for your
copies.
The following Paper Supply selections are available on the DP-C106:
• Auto – The Copier/Printer automatically determines original size and the
appropriate paper supply. The Copier/Printer then pulls the appropriate
copy stock from Paper Tray 1, 2, or 3.
• Paper Trays 1, 2, and 3 – This Paper Supply option allows you to
manually select a Paper Tray loaded with the desired output size.
Selecting Paper Tray 1, 2, or 3 along with the Auto % reduce/enlarge option
prompts the DP-C106 to fit the original image on the desired output paper
size. More information on using the Reduce/Enlarge feature is provided at
the beginning of this chapter.
• Bypass Tray – This option allows you load your desired output paper
into the Bypass Tray. Use this method when copying original documents
onto transparencies, labels, envelopes, postcards and other
unconventional paper stocks.
More information on using the Bypass Tray is provided later in this chapter.
Using Paper Trays 1, 2, and 3
Use the following procedure to make a copy using the Paper Trays 1, 2, or 3:
For instructions on loading Paper Trays 1, 2, or 3, go to the “Setting Up the
DP-C106 in Intallation Instructions.
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore all default settings.
3.  Position the original on the Document Glass or in the ADF.
For more information on positioning original documents, go to the “Basic
Copying”. 
						

							Copy Features
25
4. Use the Paper Supply ARROW buttons to select one of the following:
• Auto
You cannot use the Auto Paper Supply feature with the Auto %
Reduce/Enlarge option. You must select a specific reduce/enlarge
percentage. Information on the Reduce/Enlarge feature is provided at the
beginning of this chapter.
• Tray 1
• Tray 2
• Tray 3
If paper is not loaded in the Paper Tray, the message “ADD PAPER TO
TRAY X” is displayed on the Copier Screen, where “X” is the selected tray.
For information on loading the paper tray, go to the “Loading Paper In the
Paper Trays” procedure in the “Setting Up the DP-C106 in Installation
Instructions.
5.  Select your desired number of copies using the Numeric Keypad.
6. Press the Start button.
Using the Bypass Tray
Use the Bypass Tray to copy onto unconventional paper sizes or weights,
such as postcards, transparencies or envelopes.
Loading the Bypass Tray
Use the following procedure to load the Bypass Tray:
1.  Lower the Bypass Tray.
0302500WOL 
						

							Copy Features
26
2.  Perform one of the following:
•  If loading A3 oversize paper, ensure that the blue-green, left-hand
Paper Guide is lowered and snapped into place.
•   If loading any other size paper, lift the blue-green, left-hand Paper
Guide.
3.  Slide the right-hand Paper Guide all the way to the right.
4.  If you are printing on longer paper, pull out the Tray Extension.
0302502A -WOL
030203O 
						

							Copy Features
27
5.  Insert your paper stock into the Bypass Tray. Place the left-hand edge of
the paper stock against the left-hand paper guide.
Follow these guidelines to help minimize paper jams in the Bypass Tray:
• Do not use paper that is folded, creased or curled.
• Do not load more sheets than can fit easily under the Paper
Guide Tab.
• Whenever possible, load paper for long edge feed.
6.  Slide the right-hand Paper Guide to fit against your paper stock.
Pushing the Paper Guide to tightly against the paper stock can cause a
paper jam.
When paper stock is first loaded in the Bypass Tray, the Bypass Tray paper
selection screen automatically is displayed on the Copier Screen. For further
directions on using the Bypass Tray, go to the “Making a Copy Using the
Bypass Tray”.
0302504B -WOL
0302505A -WOL 
						

							Copy Features
28
Loading Transparencies into the Bypass Tray
Transparencies can be fed only from the Bypass Tray or optional
Transparency Tray that goes into Tray 1 position.
CAUTION
Do not use White-Framed Transparencies in this unit.  To prevent the white
tape(s) from jamming inside the Fuser Unit, this machine is designed with a
White-Frame Detection Sensor.  Upon detecting the White-Frame of the
Transparency, the unit stops feeding, causes a Jam Indication and the
Printer Screen displays: “WRONG OHP TYPE INSTALLED.
Leaving transparencies in the Bypass Tray can cause static build up, which
can cause a jam. Be sure to remove the transparencies when the job is
complete.
Use the following procedure to load transparencies into the Bypass Tray:
1.  Fan the transparency sheets a few at a time to separate them and
prevent static.
2.  Insert transparencies into the Bypass Tray until they are touching the
feeding slot.  Slide the right-hand Paper Guide against the transparency
stack.
0302514A -WOL