Panasonic Digital Color Imaging System DP-C106 Operating Instructions

							Copy Features
39
Advanced Features
The Advanced Features option includes the following:
• Output – to change the tray that your copies output to. The option can
be set to either the Exit Tray, the left-hand side Output Tray, or the Top
Tray, the tray above the printer where print jobs are output.
•  If the 10 Bin Sorter option is attached, there are other output selections
available. Refer to Determining Output with the Optional 10 Bin Sorter
for additional information.
• Erase – to set an erase value from 0 — 50 mm for the following
dimensions on your copy output:
• Horizontal
• Vertical
• Center
The DP-C106 Copier/Printer automatically creates a 4 mm border on every
copy. This is not an erase feature and can not be deleted.
• 2-Sided – to produce double sided output, output with images on both
the front and back sides, from single sided input. The following
orientation options are available for the 2-Sided feature:
•  Portrait – to have the images flip along the long edge of the output.
• Landscape – to have the images flip along the short edge of the
output.
• 2 Up – to copy two images onto a single page. The following image
positions are available for the 2 Up feature:
• ON (L➙R) – to position the images in order from left to right.
• ON (R➙L) – to position the images in order from right to left.
You can not use the 2 Up feature with the following:
• 2-Sided Selection
• Auto Paper Tray Selection
• Auto Reduce/Enlarge Feature 
						

							Copy Features
40
Using the Output Feature
Use the following procedure to make a copy using the Output feature:
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3.  Position the original on the Document Glass or in the ADF.
For more information on position originals on the Document Glass and Using
the ADF, go to the Basic Copying.
4. Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5. Use the (        ) ARROW  buttons to highlight the Output selection.
6. Press the Select button. Output Destination selection is displayed on the
Copier Screen.
7. Use the (        ) ARROW  buttons to highlight one of the following:
•  Exit Tray to direct output to the printer side output tray.
• Top Tray to direct output to the printer top output tray.
•  Sort/Stack selections if option is enabled. Refer to Determining
Output with the Optional 10 Bin Sorter.
8. Press the Select button. Advanced Features selection is displayed on
the Copier Screen.
9. Press the Exit button. The Main Screen is displayed on the Copier
Screen.
10.  Enter your desired number of copies using the Numeric Keypad.
11. Press the Start button. 
						

							Copy Features
41
Determining Output with the  Optional 10 Bin Sorter
The 10 Bin Sorter functions are available to copy jobs only.
1. Select the Copy button on the copier control panel to enter Copy Mode.
2. Select the Advanced Features button.
3. Select the Output feature.
4.  Select one of the following options:
12 x 18 Oversize paper cannot be sent to the 10 Bin Sorter.
• Exit Tray (default): Up to 100 output pages can be delivered to the
top output bin without sorting.
Example: Three copies of a single-sided three-page job will be
delivered in the order 3-3-3, 2-2-2, 1-1-1, with page 1 on top.
• High Cap: Up to 500 sheets can be stacked in the sorter’s bottom
high capacity bin without sorting. A message displays when the
high cap bin is full.
Example: One hundred copies of a single-sided three-page job will
be delivered so that 100 copies of page 3 are output first, followed
by 100 copies of page 2, then 100 copies of page 1, with page 1 on
top.
Only Plain paper jobs may be sorted or stacked. Transparencies, Thick,
Postcard or other special stock may be sent to the Exit Tray or High Cap bin.
• Sort (by set): Up to 30 sheets are sorted into a maximum of 10
sets and delivered to the sorting bins.
Example: Three copies of a single-sided three-page job will be
delivered in 3-2-1 order to each of the top three bins (page 3 is
copied first and placed in the bottom of the stack). The final order
will appear as 1-2-3, with page 1 on top.
• Stack (by page): Up to 30 sheets of the same page (up to 10
pages) can be delivered to each of the 10 sorting bins. If more than
10 pages are in the set, all extra copies will be sent to the High Cap
bin.
Example: Three copies of a single-sided three-page job will be
delivered with all copies of page three sent to bin 3, all copies of
page 2 sent to bin 2 and all copies of page 1 sent to the top bin.
5. Press Select, then Exit to continue programming the job.
6.  After the job completes, select the Clear All button to return the settings
to the default. 
						

							Copy Features
42
Using the Erase Feature
Use the following procedure to make a copy using the Output feature:
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3.  Position the original on the Document Glass or in the ADF.
For more information on positioning originals on the Document Glass and
Using the ADF, go to the Basic Copying.
4. Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5. Use the (        ) ARROW  buttons to highlight the Erase feature.
6. Press the Select button. Erase selection is displayed on the Copier
screen.
7. Use the (        ) ARROW  buttons to highlight one of the following:
• ON, to turn the Erase feature On.
•  OFF, to turn the Erase feature Off.
8. Press the Select button. One of the following happens:
•  If you selected OFF, Advanced Features selections will redisplay
on the Copier Screen. Skip to step 10.
•  If you selected ON, Erase value selection is displayed on the
Copier Screen. Use the (        ) ARROW  buttons to highlight an
erase dimension. Use the Numeric Keypad to enter an erase value
between 0 mm and 50 mm.
If you enter an incorrect value, press the Clear button to delete it.
Horizontal
Vertical
Center 
						

							Copy Features
43
9. Press the Select button. Advanced Features selection is displayed on
the Copier Screen.
10. Press the Exit button. The Main Screen is displayed on the Copier
Screen.
11.  Enter your desired number of copies using the Numeric Keypad.
12. Press the Start button.
If you enter two values and wish to change the first, you must first exit and
then return before making the desired change.
Using the 2-Sided Feature
Use the following procedure to make a copy using the 2-Sided feature:
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3.  Position the originals in the ADF.
You must use the ADF to create a 2-Sided copy. For more information on
positioning originals in the ADF, go to the Basic Copying.
4. Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5. Use the (        ) ARROW  buttons to highlight the 2-Sided feature.
6. Press the Select button. 2-Sided selection is displayed on the Copier
Screen. 
						

							Copy Features
44
7. Use the (        ) ARROW  buttons to highlight one of the following:
•  OFF to turn the 2-Sided feature off.
•  Long Edge Binding to flip the images along the long edge of the
output. This feature prints the top of the long edge side 1 image on
the same edge of the page as the top of the side 2 image. For
Portrait documents, this creates a book effect. For Landscape
documents, this creates a landscape effect.
•  Short Edge Binding to flip the images along the short edge of the
output. This feature prints the top of the side 1 short edge image on
the opposite edge of the page from the top of the side 2 image. For
Portrait documents, this creates a calendar effect. For Landscape
documents, this creates a book effect.
The Copier Screen displays an error message if the 2 Up feature is on when
you try to switch the 2-Sided feature on. For information on using the 2 Up
feature, see “Using the 2 Up Feature.”
8. Press the Select button. One of the following happens:
•  If you selected OFF, Advanced Features selection is displayed on
the Copier Screen. Skip to step 12.
•  If you selected Portrait or Landscape, Page Count is displayed on
the Copier Screen.
9. Using the (        ) ARROW  buttons, select one of the following:
• Number – to manually enter the number of originals.
•  Auto Count – to have the copier detect the number of originals.
Skip to step 12.
10.  Using the Numeric Keypad, enter the number of originals loaded in the
ADF.
11. Press the Select button. 2-Sided selection is displayed on the Copier
Screen.
12. Press the Exit button. The Main Screen is displayed on the Copier
Screen.
13.  Enter your desired number of copies using the Numeric Keypad.
14. Press the Start button. 
						

							Copy Features
45
Using the 2 Up Feature
Use the following procedure to make a copy using the 2 Up feature:
1.  If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3.  Position the originals in the ADF with the long edge of the paper entering
the ADF first (Long Edge Feed).
You must use the ADF  to create a 2 Up copy. For more information on
positioning originals in the ADF, go to the Basic Copying chapter.
4.  Select the Paper Supply and the % of Reduction/Enlargement required.
Several common sizes are listed below. Use the Zoom feature to
determine the best reduction for other sizes.
OriginalDesired 2-Up OutputReduction
8.5 x 11 in. Portrait 8.5 x 11 in. Landscape 64%
8.5 x 11 in. Portrait 11 x 17 in. Landscape 100%
8.5 x 11 in. Portrait 11 x 14 in. Landscape 75%
A4 Portrait A4 Landscape 70%
A4 Portrait B4 Landscape 86%
A4 Portrait A3 Landscape 100%
5.  Load paper into the Paper Tray by placing the short edge of the paper to
feed into the machine first (Short Edge Feed).
6. Press the Advanced Features button to display the Advanced Features
selections on the Copier Screen.
7. Use the (        ) ARROW  buttons to highlight the 2 Up feature.
8.  Press the Select button to display the 2 Up selection on the Copier
Screen. 
						

							Copy Features
46
9. Use the (        ) ARROW  buttons to select one of the following:
•  NO to turn the 2 Up feature Off.
• YES (L→R) to turn the 2 Up feature On, and position the images
from left to right.
• YES (R→L) to turn the 2 Up feature On, and position the images
from right to left.
The Copier Screen displays an error message if the 2-Sided feature is On
when you try to switch On the 2 Up feature. For information on using the 2-
Sided feature, go to the “Using the 2-Sided Feature”.
10.  Press the Select button.
•  If you selected OFF, Advanced Features selection is displayed on
the Copier Screen. Skip to step 14.
•  If you selected YES (L→R) or YES (R→L), Page Count selection is
displayed on the Copier Screen.
11. Using the (        ) ARROW  buttons, select one of the following:
•  Number – to manually enter the number of originals.
•  Auto Count – to have the copier detect the number of originals.
Skip to step 12.
12.  Using the Numeric Keypad, enter the number of originals loaded in the
ADF.
13. Press the Select button. 2 Up selection is displayed on the Copier
Screen.
14. Press the Exit button. Advance Features selection is displayed on the
Copier Screen.
15. Press the Exit button to return to the Main Screen.
16.  Enter the desired number of copies using the Numeric Keypad.
17. Press the Start button.
The Copier Screen displays an error message if the Reduce/Enlarge feature
is set at Auto or if the Paper Supply feature is set at Auto. For information on
using the Reduce/Enlarge feature go to the “Using the Reduce/Enlarge
Feature”. For information on using the Paper Supply feature go to the “Using
the Paper Supply Feature”. 
						

							47
Tools Mode
Use the Tools button on the Copier Control Panel to access Tools Mode on
your DP-C106. The Tools Mode feature provides access to meter information
and the administrative features that allow you to customize and service your
copier.
For the Administration features, the default administrator password is 9999.
Change the password as soon as possible to prevent unauthorized
personnel from accessing the Administrator Menu and its options.
Meter Check
The Meter Check feature provides a statistical report on the number of
images produced on your DP-C106. The Billing Meters screen displays the
following image counts:
• Meter 1 displays the total number of color prints and copies made.
• Meter 2 displays the total number of black and white prints and copies
made.
• Meter 3 displays the total number of copies and prints made to date by
your DP-C106.
The Meter Check feature tracks the use of your Copier/Printer so that you
may follow maintenance and service requirements accurately.
The Meter Check feature also tracks the types of copies and prints made on
your DP-C106 so that you may customize your copy functions for this
purpose.
For example, if Meter 2 readings are always higher than Meter 1 readings,
your Copier/Printer is used more for color images than for black and white
images. You may change your default settings to reflect this function.
4 
						

							Tools Mode
48
Use the following procedure to access the Meter Check screen:
1. Press the Tools button on the Copier Control Panel to display the Tools
Main Menu on the Copier Screen.
2.  Using the  (        ) ARROW buttons highlight the Meter Check feature.
3. Press the Select button. Meter Check is displayed on the Copier Screen.
4.  To exit the Meter Check feature, press the Exit button. The Tools Main
Menu is displayed on the Copier Screen.
5. Press the Tools button in order to exit Tools Mode.
Administrative Features
Accessing the Tools Mode allows you to alter several administrative features
available with the DP-C106. Those features include:
• Defaults for Copy
• Color
•  Auto Color Adjust
•  Detect Document Size
•  Auto Mode Change
•  Limit Copy Set Size
• Timer Preset
• Sound Preset
• User Password
• ADMIN Password
• Version Information
• Self Diagnostics
• Transporting Scanner