Panasonic Digital Color Imaging System DP-C106 Operating Instructions

							Tools Mode
49
Use the following procedure to access the Administrative Features menu:
1. Press the Tools button on the Copier Control Panel to display the Tools
Main Menu on the Copier Screen.
2.  Using the (       ) ARROW buttons highlight the Admin menu selection.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
The default system administrator password is 9999. Change the password
as soon as possible to prevent unauthorized personnel from accessing the
Administrator Menu and its options. For directions on changing the
Administrator Password, go to the Administrator Password procedure
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5.  Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.  Use the (        ) ARROW buttons to highlight your desired feature. Press
the Select button to view the feature options.
Specific information on each of the available Administrative features is
discussed in the following sections.
7.  To exit the Administrator Menu, press the Exit button. The Tools Main
Menu is displayed on the Copier Screen.
8.  To exit Tools Mode, press the Tools button. 
						

							Tools Mode
50
Defaults for Copy
The DP-C106 automatically restores default feature settings.
•  When the power is switched On.
•  When restoring power from Energy Saver Mode.
• When the Clear All button is pressed.
To change the default settings for the following features, select the Defaults
for Copy option from the Administrator menu in Tools Mode:
• Paper: This option allows you to change the default setting for the Paper
Supply feature.
The Paper Supply default can be set at Auto, Tray 1, Tray 2 or Tray 3.
The Paper Supply default cannot be Auto if the Reduce/Enlarge default
setting is Auto %.
• Reduce/Enlarge: This option allows you to change the default setting for
the Reduce/Enlarge feature.
The Reduce/Enlarge can be set to Auto %, 100 %, or to any of the
Preset % options listed on the Copier Control Panel.
The Reduce/Enlarge default setting cannot be on Auto % if the Paper Supply
default is set to Auto.
• Copy Density: This option allows you to change the default setting for the
Lighten/Darken feature.
The Lighten/Darken default can be set to Auto or any of the five density
levels between Dark and Light. 
						

							Tools Mode
51
• Color Mode: This option allows you to change the default setting for the
Original Type feature.
The Original Type default can be programmed to one of the following:
• Black Text
• Black Text/Photo
• Black Photograph
• Color Text/Photo
•  Color Prnt Photo
• Color Photograph
• Auto
Setting a default value for the Color Mode feature is useful when most
originals are of the same type.
• Output: This option allows you to change the default Output location for
copies.
The Output destination default can be set to the Exit Tray or the Top
Tray.
Media types other than Plain will automatically output to the Exit Tray, even if
Top Tray is selected. Additional output selections are available if the 10 Bin
Sorter option is part of the configuration. Refer to Determining Output with
the Optional 10 Bin Sorter in the Copy Features section for more information.
All paper fed from the Bypass Tray automatically outputs to the Exit Tray,
even if the Top Tray is set as the default.
• Erase: The option allows you to change the default measurements for the
Erase feature when it is on.
Each Erase dimension can be set at a value between 0 and 50 mm. The
new value is the default measurement for that dimension when the
Erase feature is on.
The default setting for the Erase option is Off. Changing the dimensional
values does not set the default to On; it only changes the default
dimensional values when the Erase feature is switched On. 
						

							Tools Mode
52
Use the following procedure to change a Defaults for Copy setting:
1. Press the Tools button on the Copier Control Panel to display the Tools
Main Menu on the Copier Screen.
2.  Using the (        ) ARROW buttons highlight the Admin menu option.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering the password, press the Clear button.
5.  Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.  Use the (        ) ARROW buttons to highlight the Defaults for Copy option.
7. Press the Select button. Defaults for Copy selection is displayed on the
Copier Screen.
8.  Using the (        ) ARROW buttons, highlight the feature whose defaults
you wish to change.
9. Press the Select button. The feature selections are displayed on the
Copier Screen.
10.  Use the (        ) ARROW buttons to highlight a new default setting.
To change the default for the Erase feature, you must enter an erase
measurement using the Numeric Keypad. If you enter a wrong number,
press the Clear button and enter the correct number.
11. Press the Select button. Defaults for Copy selection are displayed on
the Copier Screen. The new default setting displays next to the
appropriate feature.
12.  To change the default for another feature, repeat steps 8 through 11.
13. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
14.  To exit Tools Mode, press the Tools button. 
						

							Tools Mode
53
Color
The color balance setting changes the toner density for the colors yellow,
magenta, cyan and black. Each color is set for a high, medium and low
density. Each color has a density setting for three document types:
Text/Photo, Print Photo, and Photograph.
The color balance adjustment is for copies only. When the machine is in the
printer mode, color adjustments do not affect the output.
Use the following procedure to adjust the Color settings:
1. Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.  Using the (        ) ARROW buttons highlight the Admin menu option.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5.  Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.  Using the (        ) ARROW buttons, highlight the Color option.
7. Press the Select button. Color Types are displayed on the Copier
Screen.
8.  Using the (        ) ARROW buttons, highlight one of the following:
• Text/Photo
•  Print Photo for documents that are printed photographs,
photographs printed in magazines or newspapers.
•  Photograph for documents that are photographs on photographic
paper. 
						

							Tools Mode
54
9. Press the Select button. Color selection is displayed on the Copier
Screen.
10.  Using the (        ) ARROW buttons, highlight one of the following: Y for
Yellow, M for Magenta, C for Cyan and B for Black. Press the Select
button.
11.  Using the (        ) ARROW buttons, adjust the color density between –3
and +3 for each of the three density levels, Low, Middle and High.
Use the Up and Down arrows to increase or decrease the density level. Use
the Left and Right arrows to switch between  Low, Medium, and High
density.
Pressing the Clear button will return all color densities to 0.
12. Press the Select button. Color selection is displayed on the Copier
Screen. The new density value displays next to the appropriate color.
13.  To change the density of other colors, repeat steps 10 through 12.
14. Press the Exit button. Document Type selection is displayed on the
Copier Screen.
15.  To change the color density for other document types, repeat steps 8
though 14.
16. Press the Exit button. The Administrator Menu is displayed on the
Copier Screen.
17. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
18. Press the Tools button to exit Tools Mode. 
						

							Tools Mode
55
Auto Color Adjust
The Automatic Color Adjust option allows you to correct any color degradation
that occurs from use to maintain the optimum copy quality for the
Copier/Printer.
The color adjustment is for copying only. When the DP-C106 is in the printer
mode, the adjustments have no effect.
Use of High Brightness Paper (90 Brightness or higher) is strongly
recommended when making color adjustments.
Use the following procedure to apply the Auto Color Adjust feature:
1. Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.  Using the (        ) ARROW buttons highlight the Admin menu option.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5.  Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.  Use the (        ) ARROW buttons to highlight the AutoColAdjust selection.
7. Press the Select button. AutoColAdjust document type selection is
displayed on the Copier Screen.
8.  Using the (        ) ARROW buttons highlight one of the following
document types:
• Text/Photo
• Print Photo for originals that are photographs printed in magazines
or newspapers.
•  Photograph for originals that are photographs on photographic
paper.
9. Press the Select button. 
						

							Tools Mode
56
10.  Confirm that the Printout document option is highlighted. Press the
Select button.
11.  Load 8.5 in. x 11 in. or A4 paper in the Bypass Tray and press the Start
button. Load by long edge first.
For directions on loading paper in the Bypass Tray, go to the Copy Features.
12.  The Auto Color Adjustment Patch Page prints out to the Top Tray.
13.  Place the Auto Color Adjustment Patch Page face down on the
Document Glass. Position the magenta patches on the left-hand side of
the glass.
14.  Cover the Auto Color Adjustment Patch Page with 5 sheets of white
paper.
15. Press the Start button. The Copier/Printer begins the color adjustment
process.
16. Press the Exit button when the color adjustment is complete.
17.  Use (        ) ARROW buttons to highlight Print confirmation.
18. Press the Select button.
19.  Load 8.5 in. x 11 in. LEF or A4L paper in the Bypass Tray and press the
Start button. Load long edge first.
20.  Retrieve the printout from the Top Tray and inspect it to see if an
accurate color compensation has taken place.
21.  Use the (        ) ARROW buttons to highlight one of the following:
• No if the printout results are not satisfactory and to cancel the color
adjustment.
• Yes if the printout results are satisfactory and to apply the color
adjustment.
22. Press the Select button. AutoColAdjust document typeselection is
displayed on the Copier screen.
23. Press the Exit button.  AutoColAdjust document type selection is
displayed on the Copier screen.
24.  To perform the color adjustment for other document types, repeat steps
8 through 20.
25. Press the Exit button. The Administrator Menu is displayed on the
Copier Screen.
26. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
27. Press the Tools button to exit Tools Mode. 
						

							Tools Mode
57
Detect Document Size
The DP-C106 can automatically detect the size of an original if it is a certain
size. The copier measures original document sizes in millimeters or in
inches.
For a complete list of all paper sizes the DP-C106 can automatically detect,
go to the Basic Copying.
Use the following procedure to set the default unit of size:
1. Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.  Using the (        ) ARROW buttons highlight the Admin menu option.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear  button.
5.  Once the correct password is entered, the  Admin menu is displayed on
the Copier Screen.
6.  Use the (        ) ARROW buttons to highlight the Detect Doc Size option.
7. Press the Select button. Unit of Size selection is displayed on the Copier
Screen.
8.  Using the (        ) ARROW buttons highlight the desired unit of
measurement: mm (millimeters) or inch (inches).
9. Press the Select button. The Admin menu is displayed on the Copier
Screen.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to the exit Tools Mode. 
						

							Tools Mode
58
Auto Mode Change
The DP-C106 can enter copy mode when originals are loaded into the ADF or
the ADF is opened if the Auto mode change feature is set to Copy. You do
not need to press the Copy button to enter Copy Mode.
For further information on using the Copy button to enter copy mode, go to
the Basic Copying.
Use the following procedure to access the Auto Mode Change option:
1. Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.  Using the (        ) ARROW buttons highlight the Admin menu selection.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4.  Using the Numeric Keypad, enter your Administrator Password. The
numbers displays as asterisks (*).
If you make a mistake while entering a password, press the Clear  button.
5.  Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.  Use the (        ) ARROW buttons to highlight the  Auto mode change
selection.
7. Press the Select button. Auto mode change selection is displayed on
the Copier Screen.
8.  Use the (        ) ARROW buttons to highlight one of the following:
• Off to switch the Auto mode change feature Off. Copy mode can
only be entered by pressing the Copy button.
• On to switch the Auto mode change feature On. The Copier/Printer
enters copy mode when originals are loaded into the ADF or the
ADF is open.
9. Press the Select button. The Administrator Menu is displayed on the
Copier Screen.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to exit Tools Mode.