Panasonic Digital Copier DP-2000/2500/3000 Operating Instructions

							Installation and Configuration (Windows 2000)
71
Printer Section
Restore Defaults

Device Options Tab
Security Print Password
Set the password for Security Print, to enable the feature.
Duplex Unit (Standard on DP-3000)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
Inner Tray
Check this checkbox if the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FX200) are 
installed.
Specifying inner bins, Inner 1 and Inner 2, is allowed for printing on the printer.
Outer Tray
Check this checkbox if the Outer Tray (DA-XT200) is installed.
Setting of outer option is allowed when inner option is enabled.
Finisher
Check this checkbox if the 1-Bin Finisher (DA-FS200) is installed.
Setting of outer option is allowed when inner option is enabled. The staple function also is selectable when 
the outer option is enabled.
Number of Paper Tray
Select the number of available paper trays for the printer if an optional Paper Feed Module is installed.
Printer/Fax Memory
Select the size of the Expansion Flash Memory Card or whether a Fax Option (2MB) has been installed, to 
enable Security Print.
                               
button
Return all items in the Device Options Tab to standard settings (default). 
						

							Installation and Configuration (Windows 2000)
72
About...
NOTE
                               button
Displays the version information about the printer driver.
  Device Options Tab is specified in the printer properties. 
						

							Installation and Configuration (Windows 2000)
73
Printer Section

Font Substitution Tab
Edit the Font Substitution Table.
In the original setting, the Font Substitution Table is set to substitute TrueType fonts with the most similar 
printer fonts.  However, if you wish to modify the substitution, select a font from the list of TrueType fonts 
displayed at the top and then select a corresponding Printer font from the Substituted printer fonts list box.  
						

							Installation and Configuration (Windows 2000)
74
Configuring the Printer Driver Settings (User)
NOTE
Properties...
Changes the printer settings.  Display the printer settings dialog box by the steps below:
  In Windows 2000, setting the properties depends on the log-in accounts.  This section 
describes properties to be specified by a user, upon executing a print operation on an 
application.  See Configuring the Printer Driver Settings (Administrator) for details of 
administrator (system manager) properties.  (See page      )
1
Select Print in the File menu of an application.
3
Click the                             button of the print dialog box.
2
Select DP-2000/2500/3000 in the name box.
4
The dialog box for printer properties appears.  Click the top tab of the dialog box and specify the 
properties.
64  
						

							Installation and Configuration (Windows 2000)
75
Printer Section

Paper/Layout Tab 
Paper Size
Select a document size.
Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the 
printer driver will automatically select an appropriate tray according to the Paper Size.
Orientation
Select the print orientation (Portrait/Landscape).
Copies
Specify the number of copies to be printed. If the number of copies to be printed can be specified within 
the application, indicate one copy here and specify the number of copies in the Print dialog box of the 
application.
DP-3000 Driver only
Printer controlled
The printer controls number of copies. (Prints faster utilizing the Sort Memory of printer.)
Note:If the Collation can be specified on the applications Print dialog box, make sure it is
unchecked in order for this setting to function properly.
Printer driver controlled
The printer driver controls number of copies. (Prints slower but do not utilize the Sort Memory of 
printer.)
Zoom
Specify an enlargement or reduction percentage when printing documents. If enlargement/reduction can 
be set within the application, indicate 100% here and specify the enlargement/reduction percentage in the 
Print dialog box of the application. 
						

							Installation and Configuration (Windows 2000)
76
2 in 1 - Pattern 12 in 1 - Pattern 2
4 in 1 - Pattern 1
12 12 21
34
4 in 1 - Pattern 3
21
43
4 in 1 - Pattern 4
31
42
4 in 1 - Pattern 2
13
24
Magnify
Select a fixed enlargement/reduction ratio according to the paper size. Specifying the magnification ratio 
changes the Zoom to display the actual enlargement/reduction percentage.
N in 1
Specify the layout pattern for printing multiple documents on a single sheet of paper.
Selecting 2 in 1 or 4 in 1 changes the Zoom to display the actual enlargement/reduction percentage.
Note: 2 in 1 or 4 in 1 allows the user to select the following layouts under the Position field:
                          button
Return all items in Paper/Layout Tab to standard settings (default).
                  button
Displays the version information about the printer driver.
Restore Defaults
About... 
						

							Installation and Configuration (Windows 2000)
77
Printer Section

Handling Tab
Sorter
Select whether to Stack, Sort, Rotate-Sort or Shift-Sort when printing multiple copies.
Note: When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is selected.
Printing on both sides (Duplex)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and  
Automatic Duplex Unit (DA-FK200/FK210/MD200) are installed.
Note 2) Check [Duplex Printing] check box in Device Options Tab.
Flipping Direction
Select binding side (Long Edge/Short Edge) for duplex printing.
Binding Margin
Select the binding margin upon duplex printing.
The width of binding margin is specified on the main unit.  (See page 38 of the Copier Operating 
Instructions)
Output Tray
Specify the output destination.  (Auto Selection, Inner Tray 1, Inner Tray 2)
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit,  Exit 
Tray (Outer) or  1-Bin Finisher (DA-FK200/FK210/XT200/FS200) installed.
Note 2) Check the [Inner Tray], [Outer Tray] or [Finisher] check boxes in the Device Options Tab. 
						

							Installation and Configuration (Windows 2000)
78
Staple
Specifying staple printing is allowed when the output tray is set to Finisher.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and  
1-Bin Finisher (DA-FS200) installed.
Note 2) Select Sort in the sort menu.
Note 3) Paper is stapled at the top left or at top right.  (See table below.)
Letter
A4
Letter
A4
Letter
A4
Ledger
Legal
A3
FLS
B4
Ledger
Legal
A3
FLS
B4
Letter/A4
Ledger/Legal/
A3/FLS/B4
Letter/A4
Letter
A4
Letter/A4
Letter
A4
Ledger/Legal/
A3/FLS/B4
Letter/A4
Top left
Top right Top right Top right
Note) Stapling on Invoice/B5 sheet is not 
allowed.
Note) Stapling on Invoice/B5 sheet is not 
allowed.
Letter/A4 Top left
Note) Stapling on Invoice/B5 sheet is not 
allowed.
Ledger/Legal/
A3/FLS/B4
Top left
Note) Stapling on Invoice/B5 sheet is not 
allowed.
Document orientation
Paper orientation
Stapling position 
						

							Installation and Configuration (Windows 2000)
79
Printer Section
Security print
Select to enable security print.
Note 1) Security print is allowed only when the security print password is set on the Device Options Tab. 
(See page      )
                          button
Return all items in the window to standard settings (default).
                  button
Displays the version information about the printer driver.
About...
Restore Defaults
71  
						

							Installation and Configuration (Windows 2000)
80
NOTE
Restore Defaults
About..

Quality Tab
  dpi (dot per inch) means the number of dots contained in one inch.  The higher the 
value is, the higher the resolution becomes.
Resolution
Select the printer resolution (300/600dpi).
Text Color
Select the print control of colored text.
Print all text as black
All colored text is printed as solid black.
Print colored text with halftone
Colored text is printed using shades of gray.
                          button
Return all items in the Quality Tab to standard settings (default).
                  button
Displays the version information about the printer driver.