Panasonic Dmc Fz300 Owners Manual

							251
Playing Back and Editing Pictures
Using the [Playback] menu
[Rotate] / [Rotate Disp.]
You can automatically display a still picture recorded in portrait orient\
ation by taking the 
picture with the camera held vertically, or manually rotate the picture in 90-degree units.
[Rotate]    Rotating a picture manually
 • You cannot select [Rotate] when [Rotate Disp.] is set to [OFF].
1Set the menu
 →  [Playback] → [Rotate]
2Use   to select picture and press [MENU/SET] • You cannot rotate group pictures.
3Use   to select the rotation direction and press 
[MENU/SET]
[  ]: Rotate a picture 90 degrees clockw ise.
[  ]: Rotate a picture 90 degrees counte rclockwise.
[Rotate Disp.]    Rotating a picture automatically to display
1Set the menu
 →  [Playback] → [Rotate Disp.] → [ON]
 ●When you play back pictures on a PC, they cannot be displayed in the rot\
ated direction unless the 
OS or software is compatible with Exif. Exif is a file format for still \
pictures which allows recording 
information, etc. to be added. It was established by “JEITA (Japan Electronics and Information 
Technology  Industries Association)”.
 ●A picture may not be automatically rotated to display it with portrait or\
ientation on the Multi 
Playback screen, which is displayed for settings such as [Delete Multi]. 
SQW0419       
						

							252
Playing Back and Editing Pictures
Using the [Playback] menu
[Favorite]
By labeling your favorite pictures with a star [], you can play back your favorite pictures 
only, or you can delete all pictures except your favorites.
1Set the menu
 →  [Playback] → [Favorite] → [Single] or [Multi]
2Select picture (→236)
 ■To clear all
In step 
1, select [Favorite] → [ Cancel] → [Ye s], and then press [MENU/SET]
 ●Up to 999 pictures can be set. ●When you set [Favorite] for a picture in a group, the number of pictures\
 set is displayed with the 
[Favorite] icon of the first picture.
 ●Only when [Playback Mode] is set to [Normal Play], you can select [Cancel]. ●This function is not available in the following case: • Still pictures recorded with the [Quality] setting [  ] 
SQW0419     
						

							253
Playing Back and Editing Pictures
Using the [Playback] menu
[Print Set]
Picture/picture no./date printing settings can be made for when printing\
 with DPOF 
print-compatible shops or printers. (Contact the local photo printing s\
tore or read 
operating instructions of the printer to check if DPOF is supported.)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
1Set the menu
 →  [Playback] → [Print Set] → [Single] or [Multi]
2Select a still picture (→236)
3Use   to set number of still pictures and press [MENU/SET] (up to 999 
pictures)
(Repeat steps 2 and 3 when using [Multi]) • Date print setting/release → Press .
 ■To clear all
In step 
1, select [Print Set] → [ Cancel] → [Ye s], and then press [MENU/SET]
 ●When you have performed [Print Set] for pictures in a group, printing settings are made for the 
total of number of pictures set in that group. If the total number of pi\
ctures is 1,000 or higher, 
[999+] is displayed.
 ●When you perform [Print Set] for a picture in a group, the number of pic\
tures set and the total 
number of pictures are displayed with the Print Set icon of the first pi\
cture.
 ●Date print setting cannot be made for pictures with a [Text Stamp] applied. ●Depending on the type of printer, the printer settings may take priority over camera settings. ●Some DPOF information (print settings) set by other equipment cannot b\
e used. In such cases, 
delete all of the DPOF information and then set it again with this camer\
a.
 ●This function is not available in the following cases: • Motion pictures • 4K burst files • Still pictures recorded with the [Quality] setting [  ] • Cannot be set for files that are not compliant with the DCF standard 
SQW0419     
						

							254
Playing Back and Editing Pictures
Using the [Playback] menu
[Protect]
Set protection to disable picture deletion. Prevents deletion of importa\
nt pictures.
1Set the menu
 →  [Playback] → [Protect] → [Single] or [Multi]
2Select picture (→236)
 ■To clear all
In step 
1, select [Protect] → [Cancel] → [Ye s], and then press [MENU/SET]
When you set the write-protect switch on the card to the “LOCK” po\
sition, the 
picture is not erased.
 ●The picture is erased when formatting, even if it is protected. ●May not be effective when using other devices. ●When you set [Protect] for a picture in a group, the number of pictures \
set is displayed with the 
[Protect] icon of the first picture.
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Fa\
ce Recognition.
1Set the menu
 →  [Playback] → [Face Rec Edit] → [REPLACE] or [DELETE]
2Use   to select picture and press [MENU/SET]
3Use   to select a person and press [MENU/SET] • If [DELETE], go to step 5.
4Use     to select the person to replace for another and press [MENU/SET]
5Use   to select [Ye s ] and press [MENU/SET]
 ●When Face Recognition information is deleted, it cannot be restored. ●Pictures for which all Face Recognition information has been deleted are\
 not categorized in Face 
Recognition during [Category Play] or [Category Selection].
 ●Edit the Face Recognition information in group units for a picture group\
. (You cannot edit the 
information for each picture in a group.)
 ●You can edit only the first picture in a group. 
SQW0419     
						

							255
Playing Back and Editing Pictures
Using the [Playback] menu
[Picture Sort]
You can set the display sequence used for playing back pictures on this u\
nit.
1Set the menu
 →  [Playback] → [Picture Sort]
2Use   to select the item and press [MENU/SET]
[FILE NAME]Displays pictures in the folder name or file name sequence. This display 
format allows you to find the storage location of a picture on a card mo\
re 
easily.
[DATE/TIME] Displays pictures according to the date and time that the pictures were \
taken in chronological order. When the pictures are taken using several 
cameras and stored on the same card, this display format allows you find\
 
a specific picture more easily.
 ●Pictures may not be displayed according to the [DATE/TIME] sequence immediately after a card 
is inserted into this unit. In that case, wait a while, and the pictures\
 will be displayed in the [DATE/
TIME] sequence.
[Delete Confirmation]
You can set the Yes/No options that you want to select first on the confirmation screen 
when you delete a picture from either [
Ye s] or [No].
1Set the menu
 →  [Playback] → [Delete Confirmation]
2Use   to select the item and press [MENU/SET]
["Yes" first] [Ye s] is selected by default to quickly perform a deletion.
["No" first] [No] is selected by default. This setting will prevent you from 
accidentally deleting pictures. 
SQW0419     
						

							256
Wi-FiWhat you can do with the Wi-Fi
® function
Operating the camera by connecting it to a smartphone/tablet 
(→260)
Taking pictures via a smartphone (remote recording)
Playing back pictures in the camera on a smartphone
Saving pictures in the camera to a smartphone
Sending pictures in the camera to social networking services
Writing the location information on pictures in the camera
Combining motion pictures recorded with Snap Movie according to your 
preference on a smartphone
Connect easily
You can easily set up a direct connection to your smartphone 
without entering a password.
Displaying still pictures on a TV  (→273)
Wireless printing  (→278)
Sending pictures to AV device (→279)
Still pictures and motion pictures can be sent to AV device in the home (home AV 
device).
Sending pictures to a PC  (→280)
Using WEB services (→282)
Through “LUMIX CLUB”, you can send still pictures and motion pictu\
res to social 
networking services, etc. You can receive still pictures and motion pictures on a PC or a 
smartphone/tablet using the Cloud Sync. Service.
 • Hereafter

, this manual uses the term “smartphone” for both smartphones and \
tablets 
unless it is necessary to distinguish between them. 
SQW0419   
						

							257
Wi-Fi
Wi-Fi Function
 ■Before Use
 • Complete the date and time settings in advance. (→

34)
 • T

o use the Wi-Fi function on this unit, a wireless access point or a dest\
ination device 
equipped with the wireless LAN function is required.
 ■About the Wi-Fi connection lamp
Lit blue: 
 When the Wi-Fi function is ON
Blinking blue:  When sending data
 ■About the [Wi-Fi] button
In this Owner’s Manual, a function button to which [Wi-Fi] is assigned is referred to as 
the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn5] button.)
 • For details on the function button, refer to (→

61).
To start up the Wi-Fi function:
Touch [  ]
Touch [  ] 
SQW0419             
						

							258
Wi-Fi
Wi-Fi Function
 • Before a Wi-Fi connection is established, press the [Wi-Fi] button to perform the following operations:
 – The information required for directly connecting your  smartphone to this unit is displayed.
 – Y

ou can select the following items by pressing [DISP.] 
button. 
(You can also display the same menu by selecting 
 →  [Setup] → [ Wi-Fi] → [Wi-Fi Function].)
[New Connection]
[Select a destination from History] (→297)
[Select a destination from Favorite] (→297)SSID
 • This manual provides information on the process when [New Connection] is 
selected.
 • Pressing the [Wi-Fi] button during a Wi-Fi connection enables the follow\
ing operation.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
*1Terminates the Wi-Fi connection, and allows you to 
select a different Wi-Fi connection.
[Change Settings for Sending 
Images]
*2For details (→276).
[Register the Current Destination to 
Favorite]
*1Registering the current connection destination or the 
connection method, you can easily connect with the 
same connection method next time.
[Network Address] Displays the MAC address and IP address of this unit 
(→300).
*1   This item will not b
e displayed if you press  to send pictures to WEB services while the 
pictures are displayed  (→285).
*2   This item will not be displayed if the destination for [Remote Shooting & View], [Playback on 
TV] or [Send Images Stored in the Camera] is set to [Printer]. 
SQW0419     
						

							259
Wi-Fi
Wi-Fi Function
 ■Describing method
When “select [Select a destination from History]”, etc. is 
described in a step, perform any of the following operations.
With cursor button operations:
Use cursor button to select [Select a destination from 
History] and press [MENU/SET].
With touch screen operations:
Touch [Select a destination from History].
 ●Do not remove the memory card or battery or move to an area without any \
reception while 
sending images.
 ●The camera cannot be used to connect to a public wireless LAN connection\
. ●Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless 
access point.
 ●We recommend that you use a fully charged battery when you send pictures.\
 ●When sending images on a mobile network, high packet communication fees \
may be incurred 
depending on the details of your contract.
 ●Pictures may not be completely sent depending on radio wave conditions. \
If the connection is 
terminated while sending pictures, pictures with missing sections may be\
 sent.
 ●The monitor display may become distorted for an instant while connected \
to the service, however 
this will not affect the image being sent. 
SQW0419     
						

							260
Wi-Fi
Operating the camera by connecting it to a 
smartphone
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your 
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
The “Image App” is an application provided by Panasonic that allows your smartph\
one to 
perform the following operations of a Wi-Fi-compatible LUMIX.
For Android™ appsFor iOS apps
Supported OS Android 4.0 or later iOS 6.0 or later
(iPhone 3GS is not supported.)
Installation 
procedure
Connect your Android device to a 
network
Select “Google PlayTM Store”Enter “Panasonic Image App” or 
“LUMIX” to search for the app
Select “Panasonic Image App” and 
install it
 • The icon will be added to  the menu.
Connect the iOS device to the 
network
Select “App StoreSM”Enter “Panasonic Image App” or 
“LUMIX” to search for the app
Select “Panasonic Image App” and 
install it
 • The icon will be added to the menu.
 • Use the latest version. • Supported OS versions as of July 2015. Supported OS versions may be chan\
ged without prior notice.
 • For details about the operating procedure, etc., refer to [Help] in the “Image 

App” menu.
 • If you connect the camera and smartphone over a Wi-Fi connection and run\
 “Image App”, [Help] may not be displayed in the “Image 

App” menu for some smartphones. In 
such a case, disconnect the Wi-Fi connection with the camera, connect th\
e camera to 
a cellular data line such as 3G and LTE, or the Internet to display [Help] in the “Image 
App” menu.
 • Some of the screens and information provided in this document may be dif\

ferent 
depending on the supported operating system and “Image App” version.
 • The service may not be able to be used properly depending on the type of\
 smartphone  being used.
For the latest information on the “Image 

App”, refer to the support site below. 
http://panasonic.jp/support/global/cs/dsc/ (This site is available in E\
nglish only.)
 • When downloading the app on a mobile network, high packet communication \
fees may  be incurred depending on the details of your contract. 
SQW0419