Panasonic Dmc Fz300 Owners Manual

							281
Wi-Fi
Sending pictures to a PC
Sending pictures to a PC
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [PC]
2Select [Via Network] or [Direct] to connect (→293, 296)
3Select the PC you want to connect to • If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer  name (for Mac, enter the NetBIOS name).
4Select the folder you want to send to
5Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→276)
[Send Images While Recording]
6Take a still picture (→274)
[Send Images Stored in the Camera]
6Select the picture (→275)
 ●Folders sorted by the sent date are created in the specified folder, and pictures are saved in those 
folders.
 ●If the screen for a user account and password entry appears, enter the o\
ne you set on your PC. ●If the computer name (for Mac, the NetBIOS name) contains spaces, etc.\
, the name may not be 
properly recognized. If you cannot connect, we recommend changing the co\
mputer name (for 
Mac, the NetBIOS name) to a combination of 15 or less alphanumeric char\
acters only. 
SQW0419     
						

							282
Wi-Fi
Using WEB services
Through “LUMIX CLUB”, you can send still pictures and motion pictu\
res to social 
networking services, etc. By selecting the setting to automatically tran\
sfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures 
and motion pictures on a PC or a smartphone.
Wireless access pointWEB services
Cloud 
synchronization 
services
LUMIX CLUB
When sending images to WEB service
Preparation
You need to register to “LUMIX CLUB” 
(→287) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.  (→283)
 ●Panasonic assumes no responsibility for the damages resulting from the l\
eakage, loss, etc. 
of images uploaded on WEB services.
 ●When uploading images to the WEB service, do not delete images from this\
 camera, even 
after they have finished sending, until you have checked that they have \
been properly 
uploaded to the WEB service. Panasonic assumes no responsibility for the\
 damages 
resulting from the deletion of images stored in this unit.
 ●Images uploaded to the WEB service cannot be displayed or deleted with t\
his camera. Check 
images by accessing the WEB service with your smartphone or computer.
 ●If sending images fails, a report email outlining the failure will be se\
nt to the email address 
registered with “LUMIX CLUB”. 
SQW0419     
						

							283
Wi-Fi
Using WEB services
Registering the WEB service to “LUMIX CLUB”
When sending images to WEB services, the WEB service being used must be \
registered 
with the “LUMIX CLUB”.
 • Check the “F
AQ/Contact us” on the following site for compatible WEB services. 
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation
Make sure that you have created an account on the WEB service you want t\
o use, and have the 
login information available.
1Connect to the “LUMIX CLUB” site using a smartphone or computerhttp://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the se\
rvice
3If you have not registered your email address with “LUMIX CLUB”, r\
egister the 
email address
4Select the WEB service to be used for WEB service link settings and regi\
ster it • Follow the instructions on the screen to register the service. 
SQW0419     
						

							284
Wi-Fi
Using WEB services
Sending pictures
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [Web service]
2Select [Via Network] and connect  (→293)
3Select a WEB service you want to connect
4Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→276)
[Send Images While Recording]
5Take a still picture (→274)
[Send Images Stored in the Camera]
5Select the picture (→275) 
SQW0419     
						

							285
Wi-Fi
Using WEB services
 ■Quickly sending pictures in the camera to WEB services
Once you send a picture, you can send pictures to the WEB service as qui\
ckly and 
easily as using a smartphone, only when the environment for connecting t\
o a wireless 
access point is available.
(The instructions below assume that you are already registered to “L\
UMIX CLUB” 
and the camera has a record of a connection to a wireless access point.)\
Display the picture
Use   to select [Ye s] after pressing  
(When group pictures are being displayed, select 
[Upload(Wi-Fi) ] → [Ye s])
 • The same operation can be performed by touching [  ]. 
(When group pictures are selected, touch [  ], and select 
[Upload(Wi-Fi)].)
Select a WEB service you want to connectCheck the send settings, and select [Set] • The camera is connected to the previously used wireless access point and\
 the pictures are  sent to the WEB service.
 • T

o change the transmission setting for the picture, press the [DISP.] button. (→276)
 • Step ,  are not necessary when you continue to send another image. 
The pictures are sent using the same WEB service and the same picture tr\
ansmission settings 
as before.
 • T

o terminate the connection, press [MENU/SET] or operate other controls to exit the playback 
screen. You can also terminate the connection by pressing [Wi-Fi] button on the camera. 
(→258)
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step  and onwards again. • Y
ou can also change the send settings by pressing [Wi-Fi] button while using a Wi-Fi 
connection.  (→258)
 ●If the camera has no records of connections to wireless access points th\
at are available, a screen 
that asks you to select a connection method is displayed. Select the con\
nection method and 
connect the camera to a wireless access point.  (→293)
 ●When you are not registered to “LUMIX CLUB”, a screen that asks yo\
u to acquire a new login ID is 
displayed. Get a login ID and set a password. (→288)
 ●When pictures are displayed as a group, they are all sent. When a single\
 picture in a group is 
displayed, only the picture being displayed is sent. 
SQW0419       
						

							286
Wi-Fi
Using WEB services
When sending images to [Cloud Sync. Service]
Preparation
You need to register to “LUMIX CLUB” (→287) and configure the Cloud Sync. setting to send a 
picture to a Cloud Folder. Use “PHOTOfunSTUDIO” on a PC or “Image App” on a smartphone to 
configure the Cloud Sync. settings.
 ■About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] 
(Current as of July 2015)
 • If you set the picture destination to [Cloud Sync. Service], sent pictures are  temporarily saved in the cloud folder

, and they can be synchronized with the device 
in use, such as the PC or smartphone.
 • A

 Cloud Folder stores transferred images for 30 days (up to 1,000 pictur\
es). 
Transferred images are deleted automatically 30 days after the transfer. 
Furthermore, when the number of stored images exceeds 1,000, some images\
 may 
be deleted depending on the [Cloud Limit] (→276) setting even within 30 days after 
the transfer.
 • When the download of images from a Cloud Folder to all specified devices\
 is  complete, images may be deleted from the Cloud Folder even within 30 day\
s after 
the transfer

.
1Set the menu
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [Cloud Sync. Service]
2Check the message and press [MENU/SET]
3Select [Via Network] and connect  (→293)
4Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→276)
[Send Images While Recording]
5Take a still picture (→274)
[Send Images Stored in the Camera]
5Select the picture (→275) 
SQW0419     
						

							287
Wi-Fi
Using “LUMIX CLUB”
About the [LUMIX CLUB]
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize\
 images between the 
devices you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures to WEB services.
 • Y
ou can set the same “LUMIX CLUB” login ID for this unit and a smar\
tphone.  (→290)
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
 • The service may be suspended due to regular maintenance or unexpected pr\
oblems,  and service contents may be changed or added to, without prior notice to\
 the users.
 • The service may be stopped in whole or in part with a reasonable period \
of advance notice. 
SQW0419     
						

							288
Wi-Fi
Using “LUMIX CLUB”
Acquiring a new login ID ([New account])
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Set/Add Account]
3Select [New account] • Connect to the network. Proceed to the next page by selecting [Next]. • A
 confirmation screen will be displayed if a login ID has already been ac\
quired for the camera. 
Select [Ye s ] to acquire a new login ID, or [No] if you do not need to acquire a new\
 login ID.
4Select the method for connecting to a wireless access point, and set • For details (→ 293). • The settings screen will only appear during the first connection. Connec\
tion methods set on this 
unit are stored and will be used for subsequent connections. If you want\
 to change the wireless 
access point to connect to, press the [DISP
.] button, then change the connecting destination.
 • Proceed to the next page by selecting [Next].
5Read through the “LUMIX CLUB” terms of use and select [Agree] • You can press   to switch pages. • T
urn the zoom lever to the T side to enlarge the page display (x2 magnification).
 • If you turn the zoom lever to the W side after enlarging the page, the p\
age returns to its original  size (no magnification).
 • Y

ou can use 
    to move the position of the area to be enlarged. • Press 
[ Q.MENU  ] button to cancel the process without acq uiring a login ID.
6Enter the password • Enter any combination of 8 to 16 characters and numbers for the password\
. • For details on how to enter characters, refer to “Entering 
Text” (→75).
7Check the login ID and select [OK] • The login ID (12-digit number) will be displayed automatically .  
When logging in to the “LUMIX CLUB” with a computer, you only 
need to enter the numbers.
 • A

 message is displayed when the connection is complete. Select 
[OK].
 • Be sure to make a note of the login ID and password. 
SQW0419     
						

							289
Wi-Fi
Using “LUMIX CLUB”
Using a previously acquired login ID/confirming and changing login ID 
and password ([Set Login ID])
Preparation
To use a previously acquired login ID, confirm your ID and password.
To change the “LUMIX CLUB” password on the camera, access the “L\
UMIX CLUB” website from 
your smartphone or PC and change the “LUMIX CLUB” password in adva\
nce.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Set/Add Account]
3Select [Set Login ID] • The login ID and password are displayed. • The password is displayed as “”. • Close the menu if only checking the login ID.
4Select the item you wish to change
5Enter your login ID or password • For details on how to enter characters, refer to “Entering  Text” (→75). • Enter the new password you have created on your smartphone or PC into th\
e camera. If the 
password dif
fers from the one you created on your smartphone or PC, you will not be \
able to 
upload images.
6Select [Exit] 
SQW0419     
						

							290
Wi-Fi
Using “LUMIX CLUB”
To set the same login ID for the camera and the smartphone
 • Setting the same login ID on this unit and your smartphone is convenient\
 for sending images on this unit to other devices or WEB services.
 ■When either this unit or the smartphone has acquired the login ID
Connect this unit to the smartphone  (→261)From the “Image App” menu, set the common login ID • The login IDs for this unit and the smartphone become the same.
 • After connecting this unit to the smartphone, the setup screen for a com\
mon login ID 
may appear when you display the playback screen.  You can also set a common login 
ID by following the on-screen instructions.
 • This operation is not available for [Wi-Fi Direct] connection.
 ■When this unit and the smartphone have acquired different login IDs
When you want to use the smartphone’s login ID for this unit
Change the login ID and password for this unit to those acquired by the \
smartphone.
When you want to use this unit’s login ID for the smartphone
Change the login ID and password for the smartphone to those acquired by\
 this unit.
Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
1Set the menu
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Terms of use] • The camera will connect to the network and the terms of use will be disp\
layed. 
SQW0419