Ricoh Mp C4500 Instruction Manual
Have a look at the manual Ricoh Mp C4500 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 27
Network Settings
17
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.59 “Interface Settings”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-26.png "Page 27
Network Settings
17
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.59 “Interface Settings”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings...")
![Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-27.png "Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...")
![Page 29
Network Settings
19
1
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4 Settings.
❒When SMTP Authentication is set to [On], also make setting for Administra-
tors E-mail Address.
❒E-mail...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-28.png "Page 29
Network Settings
19
1
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4 Settings.
❒When SMTP Authentication is set to [On], also make setting for Administra-
tors E-mail Address.
❒E-mail...")
![Page 31
Network Settings
21
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-30.png "Page 31
Network Settings
21
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and...")
![Page 32
Connecting the Machine
22
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-31.png "Page 32
Connecting the Machine
22
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication...")
![Page 33
Network Settings
23
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with an IEEE 1394 con-
nection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3 / IMAP4...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-32.png "Page 33
Network Settings
23
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with an IEEE 1394 con-
nection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3 / IMAP4...")
![Page 35
Network Settings
25
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-34.png "Page 35
Network Settings
25
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail...")
![Page 36
Connecting the Machine
26
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending files with an IEEE 1394 connec-
tion.
For details about...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-35.png "Page 36
Connecting the Machine
26
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending files with an IEEE 1394 connec-
tion.
For details about...")
Network Settings 21 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. ❒SMTP Server and Fax E-mail Account must be specified in order to send In- ternet Fax. ❒When POP before SMTP is set to [On], you must also make settings for Recep- tion Protocol and POP3 / IMAP4 Settings. ❒When SMTP Authentication is set to [On], you must also make settings for Administrators E-mail Address. ❒E-mail Communication Port and Fax E-mail Account must be specified in or- der to receive Internet Fax. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.59 “Interface Settings” p.69 “File Transfer” Settings Required to Use E-mail Function This section lists the settings required for sending e-mail. Ethernet This section lists the settings required for sending e-mail with an Ethernet con- nection. For details about how to specify the settings, see Interface Settings and File Transfer. File Transfer Program / Change / Delete E-mail MessageAs required File Transfer Fax E-mail Account Necessary Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As requiredMenu User Tool Setting Requirements
Connecting the Machine 22 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When POP before SMTP is set to [On], also make settings for Reception Pro- tocol and POP3 / IMAP4 Settings. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.59 “Interface Settings” p.69 “File Transfer” Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required File Transfer SMTP Server Necessary File Transfer SMTP Authentication As required File Transfer POP before SMTP As required File Transfer Reception Protocol As required File Transfer POP3 / IMAP4 Settings As required File Transfer Administrators E-mail Address As required File Transfer E-mail Communication Port As required File Transfer Program / Change / Delete E-mail MessageAs required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Menu User Tool Setting Requirements
Network Settings 23 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending e-mail with an IEEE 1394 con- nection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3 / IMAP4 Settings. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.59 “Interface Settings” p.69 “File Transfer” Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Necessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network Effective Protocol Necessary File Transfer SMTP Server Necessary File Transfer SMTP Authentication As required File Transfer POP before SMTP As required File Transfer Reception Protocol As required File Transfer POP3 / IMAP4 Settings As required File Transfer Administrators E-mail Address As required File Transfer E-mail Communication Port As required File Transfer Program / Change / Delete E-mail MessageAs required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Connecting the Machine 24 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending e-mail with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see Interface Settings and File Transfer. Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required Interface Settings/ IEEE 802.11bCommunication Mode Necessary Interface Settings/ IEEE 802.11bSSID Setting As required Interface Settings/ IEEE 802.11bChannel As required Interface Settings/ IEEE 802.11bSecurity Method As required Interface Settings/ IEEE 802.11bTransmission Speed As required File Transfer SMTP Server Necessary File Transfer SMTP Authentication As required File Transfer POP before SMTP As required File Transfer Reception Protocol As required File Transfer POP3 / IMAP4 Settings As required File Transfer Administrators E-mail Address As required File Transfer E-mail Communication Port As required File Transfer Program / Change / Delete E-mail MessageAs required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Network Settings 25 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When POP before SMTP is set to [On], you must also make settings for Recep- tion Protocol and POP3 / IMAP4 Settings. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.59 “Interface Settings” p.69 “File Transfer” Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. Ethernet This section lists the settings required for sending files with an Ethernet connection. For details about how to specify the settings, see Interface Settings and File Transfer. Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Connecting the Machine 26 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. Reference p.59 “Interface Settings” p.69 “File Transfer” IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending files with an IEEE 1394 connec- tion. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. Reference p.59 “Interface Settings” p.69 “File Transfer” Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Necessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network Effective Protocol Necessary File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Network Settings 27 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending files with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. Reference p.59 “Interface Settings” p.69 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required Interface Settings/ IEEE 802.11bCommunication Mode Necessary Interface Settings/ IEEE 802.11bSSID Setting As required Interface Settings/ IEEE 802.11bChannel As required Interface Settings/ IEEE 802.11bSecurity Method As required Interface Settings/ IEEE 802.11bTransmission Speed As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Connecting the Machine 28 1 Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with an Ethernet connection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. ❒If Delivery Option is set to [On], check that IPv4 Address is specified. Reference p.59 “Interface Settings” p.69 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Network Settings 29 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for delivering data to network with an IEEE 1394 connection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒If Delivery Option is set to [On], check that IPv4 Address is specified. Reference p.59 “Interface Settings” p.69 “File Transfer” Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Necessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network Effective Protocol Necessary File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required
Connecting the Machine 30 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒If Delivery Option is set to [On], check that IPv4 Address is specified. Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required Interface Settings/ IEEE 802.11bCommunication Mode Necessary Interface Settings/ IEEE 802.11bSSID Setting As required Interface Settings/ IEEE 802.11bChannel As required Interface Settings/ IEEE 802.11bSecurity Method As required Interface Settings/ IEEE 802.11bTransmission Speed As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required