Ricoh Mp C4500 Instruction Manual
Have a look at the manual Ricoh Mp C4500 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Connecting the Machine
26
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending files with an IEEE 1394 connec-
tion.
For details about...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-35.png "Page 36
Connecting the Machine
26
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending files with an IEEE 1394 connec-
tion.
For details about...")
![Page 37
Network Settings
27
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending files with an IEEE 802.11b
(wireless LAN) connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-36.png "Page 37
Network Settings
27
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending files with an IEEE 802.11b
(wireless LAN) connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-...")
![Page 38
Connecting the Machine
28
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-37.png "Page 38
Connecting the Machine
28
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN...")
![Page 39
Network Settings
29
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with an
IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒If Delivery Option is set to [On], check that IPv4 Address is specified.
Reference
p.59...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-38.png "Page 39
Network Settings
29
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with an
IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒If Delivery Option is set to [On], check that IPv4 Address is specified.
Reference
p.59...")
![Page 40
Connecting the Machine
30
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with an
IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-39.png "Page 40
Connecting the Machine
30
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with an
IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE...")
![Page 41
Network Settings
31
1
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active]....](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-40.png "Page 41
Network Settings
31
1
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active]....")
![Page 42
Connecting the Machine
32
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
p.59 “Interface Settings”
Menu User Tool Setting Requirements
Interface...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-41.png "Page 42
Connecting the Machine
32
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings and File
Transfer.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
p.59 “Interface Settings”
Menu User Tool Setting Requirements
Interface...")
![Page 43
Network Settings
33
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected,...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-42.png "Page 43
Network Settings
33
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected,...")
![Page 44
Connecting the Machine
34
1
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment.
Ethernet
This section lists the settings required for using Document Server function with
an Ethernet connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-43.png "Page 44
Connecting the Machine
34
1
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment.
Ethernet
This section lists the settings required for using Document Server function with
an Ethernet connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN...")
![Page 45
Network Settings
35
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
an IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
p.59 “Interface Settings”
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394 IPv4...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-44.png "Page 45
Network Settings
35
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
an IEEE 1394 connection.
For details about how to specify the settings, see Interface Settings.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
p.59 “Interface Settings”
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394 IPv4...")
![Page 46
Connecting the Machine
36
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are...](http://img.usermanuals.tech/thumb/64/80705/w64_mp-c4500-instruction-manual-1499420582_d-45.png "Page 46
Connecting the Machine
36
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see Interface Settings.
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are...")
Network Settings 31 1 Reference p.59 “Interface Settings” p.69 “File Transfer” Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with an Ethernet connection. For details about how to specify the settings, see Interface Settings. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required
Connecting the Machine 32 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for using network TWAIN Scanner with an IEEE 1394 connection. For details about how to specify the settings, see Interface Settings and File Transfer. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Necessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network Effective Protocol Necessary
Network Settings 33 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see Interface Settings. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required Interface Settings/ IEEE 802.11bCommunication Mode Necessary Interface Settings/ IEEE 802.11bSSID Setting As required Interface Settings/ IEEE 802.11bChannel As required Interface Settings/ IEEE 802.11bSecurity Method As required Interface Settings/ IEEE 802.11bTransmission Speed As required
Connecting the Machine 34 1 Settings Required to Use Document Server This section lists the settings required for using Document Server function under the network environment. Ethernet This section lists the settings required for using Document Server function with an Ethernet connection. For details about how to specify the settings, see Interface Settings. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required
Network Settings 35 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for using Document Server function with an IEEE 1394 connection. For details about how to specify the settings, see Interface Settings. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Necessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network Effective Protocol Necessary
Connecting the Machine 36 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Document Server function with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see Interface Settings. Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.59 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type As required/Necessary Interface Settings/Network Permit SNMPv3 Communication As required Interface Settings/Network Permit SSL/TLS Communication As required Interface Settings/Network Host Name As required Interface Settings/ IEEE 802.11bCommunication Mode Necessary Interface Settings/ IEEE 802.11bSSID Setting As required Interface Settings/ IEEE 802.11bChannel As required Interface Settings/ IEEE 802.11bSecurity Method As required Interface Settings/ IEEE 802.11bTransmission Speed As required
Network Settings 37 1 Using Utilities to Make Network Settings You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see Using Web Image Monitor, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see Using SmartDe- viceMonitor for Admin, Network Guide. ❒For Details about using telnet, see Remote Maintenance, Network Guide. Reference Using Web Image Monitor, Network Guide Using SmartDeviceMonitor for Admin, Network Guide Remote Maintenance by telnet, Network Guide Interface Settings Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [IPv4 Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [IPv4 Gateway Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting.
Connecting the Machine 38 1 ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Address Autoconfiguration] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server 1-3] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DDNS Configuration] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Specify] → [Domain Name] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Primary WINS Server] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting.
Network Settings 39 1 ❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv4] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: You can specify the TCP/IP settings if SmartDeviceMonitor for Admin is communicating with the machine using IPX/SPX. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv6] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [NetWare] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: You can specify the IPX/SPX settings if SmartDeviceMonitor for Admin is communicating with the machine using TCP/IP. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [SMB] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [AppleTalk] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NCP Delivery Protocol] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Cannot be used for specifying the setting.
Connecting the Machine 40 1 ❖[Network] → [NW Frame Type] → [Auto Select] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet II] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.2] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.3] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet SNAP] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [SMB Computer Name] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [SMB Work Group] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Ethernet Speed] Web Image Monitor: Cannot be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Cannot be used for specifying the setting.