Xerox 700 Digital Color Press User Manual

							
9-3
Specifications
User Guide
Xerox 700 Digital Color Press
Advanced Finisher
Top Tray capacity:  500 sheets
•
Stacker Tray:  3000 sheets
•
Paper weights:  52-216 gsm uncoated to Top and Stacker Trays; 217-280 gs\
m 
•
uncoated to Top Tray only
Stapling:  50-sheet, multi-position
•
Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching fo\
r 
•
Europe
Top Tray capacity:  500 sheets
•
Stacker Tray:  1500 sheets
•
Paper weights:  52-216 gsm uncoated to Top and Stacker Trays; 217-280 gs\
m 
•
uncoated to Top Tray only
Stapling:  50-sheet, multi-position
•
Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching fo\
r 
•
Europe
Booklet Tray:
•
Professional Finisher (with 
Booklet Maker)
Up to 20 sets accepted in the Booklet Tray
•
Stapled:  15 sheets/set (up to 90 gsm of uncoated stock)
•
Non-stapled: 5 sheets/set 
•
Bi-Fold:  1 sheet/set (up to 169 gsm of uncoated stock)
•
Stackable number of sets depends on paper size
•
Top Tray capacity:  500 sheets
•
Stacker Tray Capacity:  5000 sheets
•
Paper weights:  52-300 gsm uncoated; 105-220 gsm coated
•
Paper sizes:  4 x 5.6 in./102 x 142 mm to 13 x 19 in./SRA3/330 x 488 mm \
to Top 
•
Tray; 7.2 x 10.5 in./182 x 257 mm to 13 x 19 in./SRA3/330 x 488 mm to St\
acker 
Tray
High Capacity Stacker 
(HCS)
The Interface Module (IM) acts as a communication device and paper pat\
h between 
the print engine and an optional finishing device such as the HCS or the\
 Light 
Production C Finisher (refer to next page for more information on this \
finisher).  One IM 
is required when using an optional HCS or optional Light Production C Fi\
nisher.
Interface Module
Optional finishing accessories
Downloaded From ManualsPrinter.com Manuals 
						

							
9-4
Specifications
User Guide
Xerox 700 Di
gital Color Press
Tray Type
Output Tray: Collated/Uncollated
Finisher Tray: Collated/Uncollated  (Offset available)
Booklet Tray: Collated/Uncollated
Top Tray:
Maximum: A3, 12.6 x 19.2in. (330 x 488 mm)
•
Minimum: A6 (postcards)
•
Finisher Tray:  Maximum: 12.6 × 19.2 in. (330 x 488 mm)
•
Minimum: B5
•
Booklet Tray: Maximum: A3/13 × 18 in.
•
Minimum: A4/8.5 × 11 in.
•
Supported Paper Size
Top Tray: 500 sheets
Finisher Tray: 2,000 sheets, 200 sets*
* When using A4 LEF, B5 LEF, 8.5 × 11 in. LEF, 8 x 10 in. LEF, 7.5 x \
10.5 in. LEF only. 
When using paper of other sizes, tray capacity is 1,500 sheets and 100 s\
ets.
Booklet Tray: 20 sets
Tray may not support some paper types.
Tray Capacity
Maximum stapled sheets: 100 sheetsWhen using paper of size larger than A4 or 8.5 x 11 in., the maximum num\
ber 
•
of sheets that can be stapled is 65.
Staple nails may bend when using certain paper types.
•
Paper size:  Maximum: A3/11 x 17 in. 
•
Minimum: B5 LEF
•
Staple position:  1 location: (front: angled stapling, center: parallel stapling, back: p\
arallel 
•
stapling*)
2 locations: (parallel stapling) 
•
Stapling (variable length)
Light Production C Finisher
Top Tray and Finisher Tray: 52 - 253 gsm
Booklet Tray: center binding 60 - 90 gsm, center folding 60 -105 gsm
NOTE: For covers, paper of up to 220 gsm is supported.
NOTE: If 91 -220 gsm paper is used for covers, the main Body of document\
s must use 
60 - 80 gsm paper.
Supported Paper Weight
Downloaded From ManualsPrinter.com Manuals 
						

							
9-5
User Guide Specifications
Xerox 700 Digital Color Press
Hole Punching
Supported paper size:
Maximum: A3/11 x 17 in.
•
Minimum: B5 LEF (2 holes), A4 LEF (4 holes)
•
Number of holes: 2, 4, 3 (optional)
Paper type: 52 - 200 gsm
Maximum number of sheets: Fold and Staple: 25 sheets
•
Fold only: 5 sheets
•
When using Xerox 20 lb./75 gsm paper, only 14 sheets can be stapled if a\
dding a cover. 
Paper size:  Maximum: A3, 13 x 18 in.
•
Minimum: A4 SEF, 8.5 x 11 in. SEF
•
Paper type:  Fold and Staple: 60 - 90 gsm 
•
Fold only: 60 - 105 gsm 
•
Paper Weights/Booklet Capacity:  64 - 80 gsm, Uncoated: 25 sheets 
•
81 - 90 gsm, Uncoated: 20 sheets 
•
91 - 105 gsm, Uncoated: 10 sheets 
•
106 - 128 gsm, Uncoated: 10 sheets, Coated: 10 sheets 
•
129 - 150 gsm, Uncoated: 10 sheets, Coated: 10 sheets 
•
151 - 176 gsm, Uncoated: 10 sheets, Coated: 10 sheets 
•
177 - 220 gsm, Uncoated: 5 sheets, Coated: 5 sheets
•
Booklet Creation/Single 
Fold
Note: Non-stapled fold sets are limited to 5 sheets of paper.
Refer to the optional Folder table on page 13-11 for folder specificatio\
ns.
Folding
Light Production C Finisher
Paper size: 
Maximum: A3/11 × 17 in.
•
Minimum: B5 LEF 
•
The machine does not copy or print on paper loaded in Tray 8.
Capacity: 200 sheets when using Xerox 20 lb./75 gsm paper. 
Paper type: 60 - 220 gsm
Tray 8 (Post-Process 
Inserter; also called 
Interposer)
Downloaded From ManualsPrinter.com Manuals 
						

							
9-6
Specifications
User Guide
Xerox 700 Di
gital Color Press
Z-Fold Half Sheet
Z-paper size:  11 x 17 in./A3, 10 x 14 in./B4, 8K
Capacity: 
Max: 80 sheets (A3/11 × 17, in.Xerox 20 lb./75 gsm paper Z folding)\
•
20 sheets for 8K and 10 x 14 in./B4
•
Paper Type:  16-24 lb./60 to 90 gsm
Output tray:  Finisher tray
Paper size:  A4/8.5 × 11 in.
Number of sheets to be folded:  1 sheet 
Capacity:  40 sheets (When using Xerox 20 lb./75 gsm paper.)
Paper type:  16-24 lb./60 to 90 gsm 
Output tray:  C/Z Fold output tray
C-Fold
Z-FOld
Folder (Z/C)
Refer to Booklet Creation/Single Fold specifications found in the Bookle\
t Maker Finisher 
specifications table.
Single Fold
SquareFold Trimmer 
Module Paper size:
Minimum: 8.5 x 11 in/A4 SEF 
•
Maximum:  13 x 18 in/330 x 457 mm 
•
Trim capacity:  5-20 sheet booklet (up to 80 imaged sides) at 24 lb./90 gsm 
•
5-25 sheet booklet (up to 100 imaged sides) at 200 lb./80 gsm
•
Cut amount:  2-20 mm, adjustable in 0.1 mm increments
Paper weights:  16 lb. bond - 90 lb. cover (60-220 gsm)
Dimensions:  50 in. (1271. 4 mm) width x 28.5 in. (724.3 mm) depth x\
 22 in. (558.8 mm) 
height
Weight:  209 lb. (95 kg)
NoTE:  The SquareFold Trimmer Module requires both Interface Module and \
the Light 
Production C Finisher.
The GBC AdvancedPunch provides another level of finishing options to you\
r output by 
allowing you to punch holes in 8.5 x 11 in./A4 documents which support a\
 variety of 
binding styles.  Punch types include 19-hole to a maximum of 32-Hole for\
 8.5 x 11 in. 
media.  A4 media supports punch types 21-hole to a maximum of 47-hole.
GBC AdvancedPunch
Downloaded From ManualsPrinter.com Manuals 
						

							
9-7
User Guide Specifications
Xerox 700 Digital Color Press
Foreign Interface Kit The Foreign Interface Kit enables the connection of external devices suc\
h as 
auditrons or coin-op devices. This will perform in copy and print modes.\
Additional optional accessories
Electrical Specifications
Voltage: 208-240 VAC minus 10%/plus6%
Frequency: 50/60 Hz plus/minus 3%
Amperage: 12 Amps
Power Consumption: 2.746 KVA maximum
                            
Electrical Specifications
Downloaded From ManualsPrinter.com Manuals 
						

							
9-8
Specifications
User Guide
Xerox 700 Di
gital Color Press
Downloaded From ManualsPrinter.com Manuals 
						

							
10-1
User Guide
The Interface Module (IM) is an optional finishing accessory 
that is used in conjunction with other optional finishing 
accessories, such as the High Capacity Stacker or the Basic 
Finisher with Booklet Maker. 
The IM provides the following:
A paper path between the machine and the 
•
connected finishing device (for example, the High 
Capacity Stacker or Basic Finisher with Booklet 
Maker)
Paper curl correction functions
•
Communications between the machine and the 
•
various connected finishing devices
Interface Module
High Capacity Stacker (HCS)
The Control Panel consists of the following:
1 Auto Curl button: This button selects the Auto Decurl function.
2 Manual Curl Up button:This button selects the three values of manual 
up curl.
3 Manual Curl Down button: This button selects the three values of 
manual down curl.
4 Auto Curl indicator: This idicates the that the Auto Curl Mode is 
selected.
5 Curl Up/Down Indicators: These indicate the amount of manual curl 
(up or down) that is selected.
Interface Module
Overview
Control Panel
Addendum
1
2
3
4
5
Downloaded From ManualsPrinter.com Manuals 
						

							
Xerox 700 Digital Color Press
Addendum
10-2 User Guide
As media enters the Interface Module, it is fed to the 
Decurler for curl correction. The Decurler has both upper 
and lower decurl rolls that apply pressure to the media 
based upon the following:
System default
•
Decurl selections made in tools-mode on the User 
•
Interface
Manual selections made at the Decurler Control 
•
Panel
 
Based on the decurl settings, the Decurler Gate routes the 
paper either to the up-curl (Upward/Cupped) path or to 
the down-curl (Downward/Bridged) path. Pressure then is 
applied to the paper to remove any upward or downward 
curl. The paper is then moved from the decurler to the 
connected finishing device.From the machine
Decurler To the 
finishing 
device
Paper path
Paper curl
When paper is exposed to heat, the paper loses moisture and curls toward\
 the heat source. High coverage jobs tend to 
curl more due to the toner plastification effect on the paper surface. T\
he system tries attempts to reduce this by using 
a mechanical decurling device, located within the Interface Module.
Some factors affecting paper curl are:
The weight of the paper and/or whether it is coated or uncoated.
•
The amount of dry ink/toner and the area being coverage per sheet.
•
How the paper is loaded in the tray.
•
The atmospheric conditions of the paper storage room and at the printer \
location.
•
Downloaded From ManualsPrinter.com Manuals 
						

							
Addendum
Xerox 700 Digital Color Press
10-3
User Guide
In Auto Decurler mode, appropriate decurl settings are selected from the\
 Tools Mode on the UI by:
1. Logging on as Administrator
2. Pressing the Machine Status button.
3. Selecting the Tools tab
4. Selecting System Settings/Common Service Settings/Maintenance
5. Selecting Decurler Setup
The Manual Decurler mode has seven levels of curl correction available a\
t the Interface Module Control Panel:
Three levels of Up-curl correction Three levels of Down-curl correction, and
•
 A No correction level.
•
The amount of curl correction is changed by selecting a related button. \
The current selected amount of curl correction 
is displayed by the Control Panel LEDs. Your system is also designed with several automated presettings for cont\
rolling paper curl. When using these settings, 
the machine automatically sets the amount of curl correction at the Decu\
rler.  Therefore, if paper curl is a problem, use 
one of the preset Decurler settings in order to eliminate the problem. 
When the media passes through the decurler, you are notified of the curr\
ent amount of curl correction by-way-of the 
various LEDs on the Interface Module Control Panel. In addition to Auto \
Decurler mode, you can manually select curl 
correction from the Interface Module Control Panel.
Auto Decurler
Manual Decurler
Preset Decurler settings
Downloaded From ManualsPrinter.com Manuals 
						

							
10-4User Guide
Xerox 700 Digital Color Press
Addendum
If a jam occurs, the machine stops printing and a message is displayed o\
n the User Interface (UI). Follow all 
instructions displayed completely and in the sequence shown.
When a problem occurs with your Interface Module, instructions may appea\
r on the UI; refer to the information in this 
section to help resolve the problem. 
The fault code table, which starts on the following page, lists problems\
 and suggested solutions that apply to the 
Interface Module. If the problem persists after following all instructio\
ns, call your Xerox representative.
Jam clearance
Interface Module jams
Basic troubleshooting
Perform the following steps to clear the Interface Module jam and resume\
 printing.
Open the Interface Module Front Cover.
Lift the green handles and/or rotate the green knob and 
remove all jammed paper and paper scraps.
Close the Interface Module Front Cover.
If the UI indicates there is a jam in the digital press, 
follow the instructions on the screen to remove any paper 
in the area indicates. Refer to the Jam Clearance section 
in the Problem Solving chapter in this manual.
Follow the instructions displayed on the digital press UI 
to resume printing.
Downloaded From ManualsPrinter.com Manuals