Canon printer PIXMA MG2920 white User Manual

							Important•
Some applications do not support continuous scanning from the ADF. For details, refer to theapplication's manual.
Note
•
To scan magazines containing many color photos, select  Magazine (Color).
3.
Click Preview .
Preview image appears in the Preview area.
Important
•
Preview  is not displayed when an ADF type is selected for  Select Source.
Note
•
Colors are adjusted based on the document type selected in  Select Source.
4.
Set Destination .
Note
•
Skip ahead to Step 7 when an ADF type is selected for  Select Source.
5.
Set Output Size  according to purpose.
Output size options vary by the item selected in  Destination.
6.
Adjust the cropping frames (scan areas) as required.
Adjust the size and position of the cropping frames on the preview image.
Adjusting Cropping Frames (ScanGear)
7.
Set  Image corrections  as required.
481 
						

							8.Click Scan.
Scanning starts.
Note
•
Click  (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
Related Topic
Basic Mode Tab
482 
						

							Scanning in Advanced ModeUse the  Advanced Mode  tab to specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time.
Refer to "
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode " to scan
multiple documents placed on the ADF (Auto Document Feeder).
Important
•
The following types of documents may not be scanned correctly. In that case, click  (Thumbnail)
on the Toolbar to switch to whole image view and scan.
•
Photos that have a whitish background
•
Documents printed on white paper, hand-written text, business cards, etc.
•
Thin documents
•
Thick documents
•
The following types of documents may not be scanned correctly.
•
Documents smaller than 1.2 inches (3 cm) square
•
Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Click the  Advanced Mode  tab.
The tab switches to  Advanced Mode.
Note
•
Settings are not retained when you switch modes.
483 
						

							3.Set Input Settings according to the document or purpose.4.
Click Preview .
Preview images appear in the Preview area.
5.
Set Output Settings .
6.
Adjust the cropping frame (scan area), correct image, and adjust colors as required.
Adjusting Cropping Frames (ScanGear)
Image Settings
Color Adjustment Buttons
7.
Click Scan.
Scanning starts.
Note
•
Click  (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
Related Topic
Advanced Mode Tab
484 
						

							Scanning Multiple Documents from the ADF (Auto Document
Feeder) in Advanced Mode
Use the  Advanced Mode  tab to specify the image brightness, color tone, etc. and scan multiple documents
placed on the ADF (Auto Document Feeder) at one time. When using a model supporting ADF duplex
scanning, you can scan both sides of the documents automatically from the ADF.
When scanning from the ADF, documents are scanned without preview.1.
Place the documents on the ADF of the machine, then start ScanGear (scanner driver).
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)
2.
Click the  Advanced Mode  tab and select Document (ADF Simplex)  or Document (ADF
Duplex)  for Select Source .
Note
•
Settings are not retained when you switch modes.
•
You can select Document (ADF Duplex)  when using a model supporting ADF duplex scanning.
3.
Set Input Settings according to the document or purpose.
4.
Set Output Settings .
5.
Make image corrections and color adjustments as required.
Image Settings
Color Adjustment Buttons
6.
Click Scan.
Scanning starts.
485 
						

							Note•
Click  (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
Related Topic
Advanced Mode Tab
486 
						

							Scanning Multiple Documents at One Time with ScanGear
(Scanner Driver)
You can scan two or more photos (small documents) on the Platen at one time on the  Basic Mode tab and
Advanced Mode  tab.
This section explains how to scan multiple documents from the  Basic Mode tab.
Important
•
To scan multiple documents as a single image, scan in whole image view.
•
The following types of documents may not be cropped correctly. In that case, adjust the cropping
frames (scan areas) in whole image view and scan.
•
Photos that have a whitish background
•
Documents printed on white paper, hand-written text, business cards, etc.
•
Thin documents
•
Thick documents
Scanning Multiple Documents in Whole Image View
•
The following types of documents may not be scanned correctly.
•
Documents smaller than 1.2 inches (3 cm) square
•
Photos that have been cut to various shapes
Note
•
You can also scan multiple documents at one time from the  Advanced Mode tab. Use the Advanced
Mode  tab to make advanced scan settings such as the color mode, output resolution, image brightness,
and color tone.
•
Refer to the corresponding sections below for details on the  Basic Mode tab and Advanced Mode  tab.
Basic Mode Tab
Advanced Mode Tab
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source  according to the document placed on the Platen.
487 
						

							3.
Click Preview .
Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size.
4.
Set  Destination .
5.
Set Output Size  according to purpose.
6.
Adjust the cropping frames and set  Image corrections as required.
Note
•
You can correct each image separately. Select the frame you want to correct.
•
In thumbnail view, you can only create one cropping frame per image. To create multiple cropping
frames in an image, scan in whole image view.
Scanning Multiple Documents in Whole Image View
488 
						

							7.Select the images you want to scan.
Select the checkboxes of the images you want to scan.8.
Click  Scan.
Scanning Multiple Documents in Whole Image View
Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
Note
•
Positions of slanted documents are not corrected in whole image view.
1.
After previewing images, click  (Thumbnail) on the Toolbar.
Switch to whole image view.
Note
•
When the whole image is displayed, the icon changes to  (Whole Image).
2.
Set  Destination .
3.
Set Output Size  according to purpose.
Invert aspect ratio  will be enabled when  Output Size is set to anything but  Flexible. Click this button
to rotate the cropping frame. Click again to return it to the original orientation.
4.
Adjust the cropping frames.
489 
						

							Adjust the size and position of the cropping frames on the preview image. You can also create two or
more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
Adjusting Cropping Frames (ScanGear)
5.
Set  Image corrections  as required.
6.
Click Scan.
Areas framed by broken lines are scanned.
Note
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
490