Canon printer PIXMA MG2920 white User Manual

							Print Results Not SatisfactoryIf the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the
paper and print quality settings first.
Check1  Do the page size and media type settings match the size and type of the loaded
paper?
When these settings are incorrect, you cannot obtain a proper print result. If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the
printout color.
Also, if you print with an incorrect paper type setting, the printed surface may be scratched.
The method of confirming the paper and print quality settings differs depending on what you do with your
machine.
To print from a PictBridge (Wireless LAN)
compliant deviceConfirm by using your PictBridge (Wireless LAN) compliant device.
About PictBridge (Wireless LAN) Print Settings
To print from a computerConfirm by using the printer driver.
Printing with Easy Setup
Check2  Make sure that the appropriate print quality is selected referring to the table in
Check 1.
Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven colors,
increase the print quality setting and try printing again.
You can confirm the print quality setting using the printer driver.
Changing the Print Quality and Correcting Image Data
Check3  If the problem is not resolved, there may be other causes.
See also the sections below:
Cannot Print to End of Job
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Colors Are Unclear
Lines Are Misaligned
Line Does Not Print or Prints Partially
Image Does Not Print or Prints Partially
Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Colors Are Uneven or Streaked
If the Printed Paper Has Been DiscoloredColors may fade with time if the printed paper is left for a long period of time.
611 
						

							After printing, dry the paper sufficiently, avoid high temperatures, high humidity, and direct sunlight, andstore or display indoors at room temperature and normal humidity.
To avoid direct exposure to air, it is recommended that you store the paper in an album, plastic folder,
photo frame, etc.
612 
						

							Cannot Print to End of Job
Check1 Select the setting not to compress the printing data.
If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved.
Click  Print Options  on the Page Setup  sheet on the printer driver. Select the  Do not allow application
software to compress print data  check box, then click OK.
* Deselect the check box after printing is complete.
Check2  Is the size of the print data extremely large?
Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
the displayed dialog to  On.
* When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
Check3
 Is the space of your computer's hard disk sufficient?
Delete unnecessary files to free disk space.
613 
						

							No Printing Results/Printing Is Blurred/Colors Are Wrong/White
Streaks
 No Printing Results
 Printing Is Blurred
 Colors Are Wrong
 White Streaks
Watch the movie
614 
						

							Check1 Did you confirm the paper and print quality settings?
Print Results Not Satisfactory
Check2 Print the Nozzle Check Pattern and perform any necessary maintenance
operations such as Print Head Cleaning.
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.Refer to 
When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
Cleaning, and Print Head Deep Cleaning.
•
If the Nozzle Check Pattern is not printed correctly:
After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern.
•
If the problem is not resolved after performing the Print Head Cleaning twice:
Perform the Print Head Deep Cleaning.
If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and
perform another Print Head Deep Cleaning after 24 hours.
•
If the problem is not resolved after performing the Print Head Deep Cleaning twice:
Ink may have run out. Replace the FINE cartridge.
Check3  When a FINE cartridge runs out of ink, replace it with a new one.
Check4 When using paper with one printable surface, make sure that the paper is
loaded with the printable side facing up.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality. Load paper with the printable side facing up.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
Check5  Is the FINE cartridge installed properly?
If the FINE cartridge is not installed securely, ink may not be ejected correctly.
Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges. Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
After confirming that the FINE cartridge is installed properly, close the cover.
•
When copying, see also the sections below:
Check6  Is the platen glass dirty?
Clean the platen glass.
615 
						

							Cleaning the Platen Glass and Document Cover
Check7 Make sure that the original is properly loaded on the platen glass.
Loading Originals
Check8
 Is the original loaded with the side to be copied facing down on the platen
glass?
Check9  Did you copy a printout done by this machine?
If you use a printout done by this machine as the original, print quality may be reduced depending on the
condition of the original.
Reprint from the computer if you can reprint from it.
616 
						

							Colors Are Unclear
Watch the movie
Check1 Is the Nozzle Check Pattern printed properly?
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to 
When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
Cleaning, and Print Head Deep Cleaning.
•
If the Nozzle Check Pattern is not printed correctly:
After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern.
•
If the problem is not resolved after performing the Print Head Cleaning twice:
Perform the Print Head Deep Cleaning.
If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and
perform another Print Head Deep Cleaning after 24 hours.
•
If the problem is not resolved after performing the Print Head Deep Cleaning twice:
Ink may have run out. Replace the FINE cartridge.
Check2  When a FINE cartridge runs out of ink, replace it with a new one.
Check3 Is the FINE cartridge installed properly?
If the FINE cartridge is not installed securely, ink may not be ejected correctly. Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.
Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
After confirming that the FINE cartridge is installed properly, close the cover.
Note
•
Printed colors may not match screen colors due to basic differences in the methods used to produce colors. Color control settings and environmental differences can also affect how colors appear on the
screen. Therefore, colors of printing results may be different from those on the screen.
617 
						

							Lines Are Misaligned
Check1 Did you confirm the paper and print quality settings?
Print Results Not Satisfactory
Check2 Perform Print Head Alignment.
If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
Aligning the Print Head
Note
•
If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment
manually referring to 
Aligning the Print Head Position from Your Computer .
Check3
 Increase the print quality and try printing again.
Increasing the print quality in the printer driver may improve the print result.
618 
						

							Line Does Not Print or Prints Partially
Check1 Is the Page Layout Printing performed or the Binding margin function used?
When the Page Layout Printing or Binding margin function is being used, thin lines may not be printed. Try
thickening the lines in the document.
Check2  Is the size of the print data extremely large?
Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
the displayed dialog to  On.
* When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
619 
						

							Image Does Not Print or Prints Partially
Check1 Select the setting not to compress the printing data.
If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved.
Click  Print Options  on the Page Setup  sheet on the printer driver. Select the  Do not allow application
software to compress print data  check box, then click OK.
* Deselect the check box after printing is complete.
Check2  Is the size of the print data extremely large?
Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
the displayed dialog to  On.
* When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
620