NEC Neax 2400 Ipx Office Data Specification

NDA-24298 CHAPTER 4
Page 487
Issue 1
ADIM : Assignment of Dial Intercom Data
4. Data Sheet
(a) Dial Intercom Digit Number: One digit (N = 0)
MODULE
GROUP
NUMBER
(MG No.)GROUP
ID
NUMBER
(G-ID)
1-50DIAL INTERCOM
DIGIT NUMBER
(N=0)
ONE DIGITBRIDGE
CALL
RESTRICTION 
(BCR)
0/1TENANT
NUMBER
(TN)REMARKS
00
NUMBER
OF
INTERCOM
STN
(ICMCT)INTERCOM
 STATION
NUMBER (ICM STN)NUMBER 
OF 
INTERCOM
STN
(ICMCT)INTERCOM STATION
NUMBER (ICM STN)REMARKS
05
16
27
38
49
MODULE
GROUP
NUMBER
(MG No.)GROUP
ID
NUMBER
(G-ID)...

CHAPTER 4 NDA-24298
Page 488
Issue 1
ADIM : Assignment of Dial Intercom Data
(b) Dial Intercom Digits Number: Two digits (N = 1)
MODULE
GROUP
NUMBER
(MG No.)GROUP
ID
NUMBER
(G-ID)
1-50DIAL INTERCOM
DIGIT
NUMBER
(N)
0/1BRIDGE
CALL
RESTRICTION 
(BCR)
0/1TENANT
NUMBER
(TN)REMARKS
1
NUMBER OF 
INTERCOM 
STN
(ICM CT)INTERCOM STATION 
NUMBER (ICM STN)NUMBER OF 
INTERCOM 
STN
(ICM CT)INTERCOM STATION 
NUMBER 
(ICM STN)REMARKS
00 32
01 33
02 34
03 35
04 36
05 37
06 38
07 39
08 40
09 41
10 42
11 43
12 44
13 45
14...

NDA-24298 CHAPTER 4
Page 489
Issue 1
ADIM_T : Assignment of Dial Intercom Data – Telephone Number
ADIM_T : Assignment of Dial Intercom Data – Telephone Number
1. General
This command is used to assign Dial Intercom service related data. The station data of ADIM command can be
assigned by using Telephone Number instead.
2. Precautions
1. Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the
ALGSL command is not available in this command.
2. In case logging in to a...

CHAPTER 4 NDA-24298
Page 490
Issue 1
ADIM_T : Assignment of Dial Intercom Data – Telephone Number
3. Data Entry Instructions
 
Note:The existing data can be readout by pressing “Get” button after UGN and TELN data is entered.
 
 
NUMBER
OF
INTERCOM
STATION
(ICMCT)NUMBER
OF
INTERCOM
STATION
(ICMCT) MODULE
GROUP
NUMBER
(MG No.)
00-07GROUP
ID
NUMBER
(G-ID)
1-50USER
GROUP
NUMBER
(UGN) BRIDGE
CALL
RESTRICTION
(BCR) DIAL
INTERCOM
DIGIT
NUMBER
(N)TELEPHONE NUMBER OF
INTERCOM STATION
(TELN)
Max. 16...

NDA-24298 CHAPTER 4
Page 491
Issue 1
ADIM_T : Assignment of Dial Intercom Data – Telephone Number
4. Data Sheet
(a) Dial Intercom Digit Number: N = One digit (0-9) Dial Intercom STN
MODULE 
GROUP 
NUMBER
(MG No.) 
00-07GROUP ID 
NUMBER
(G-ID) 
1-50DIAL 
INTERCOM
DIGIT
NUMBER
(N)BRIDGE CALL
RESTRICTION
(BCR)USER
GROUP
NUMBER 
(UGN)
 
NUMBER
OF
INTERCOM
STATION
(ICMCT)TELEPHONE NUMBER OF
INTERCOM STATION
 (TELN)
Max. 16 digitsNUMBER
OF
INTERCOM
STATION
(ICMCT)INTERCOM TELEPHONE
NUMBER
 (TELN)
Max. 16...

CHAPTER 4 NDA-24298
Page 492
Issue 1
ADIM_T : Assignment of Dial Intercom Data – Telephone Number
(b) Dial Intercom Digits Number: N = Two digits (00-63) Dial Intercom STN
MODULE 
GROUP 
NUMBER
(MG No.) 
00-07GROUP ID NUM-
BER
(G-ID) 
1-50DIAL 
INTERCOM
DIGIT
NUMBER
(N)BRIDGE CALL
RESTRICTION
(BCR)USER
GROUP
NUMBER 
(UGN)
 
NUMBER
OF
INTERCOM
STATION
(ICMCT)TELEPHONE NUMBER OF
INTERCOM STATION
 (TELN)
Max. 16 digitsNUMBER
OF
INTERCOM
STATION
(ICMCT)TELEPHONE NUMBER OF
INTERCOM STATION
 (TELN)
Max. 16...

NDA-24298 CHAPTER 4
Page 493
Issue 1
AIZP : Assignment of Internal Zone Paging Data
AIZP: Assignment of Internal Zone Paging Data
1. General
This command assigns Internal Zone Paging group data. If the designated group number has already been
assigned, the current data is displayed. If new data is to be assigned, the old data must be deleted before entering
new data.
2. Precautions
1. Each Internal Zone Paging group must be composed of D
term station (TEC = 12).
2. A maximum of 24 stations can be...

CHAPTER 4 NDA-24298
Page 494
Issue 1
AIZP : Assignment of Internal Zone Paging Data
4. Data Entry Instructions
TENANT NUMBER 
(TN)INTERNAL ZONE 
PAGING GROUP 
(IZPG) 
1-99NUMBER OF
STATIONS 
(CNT)INTERNAL ZONE
PAGING TENANT
NUMBER 
(IZP TN)INTERNAL ZONE 
PAGING STATION
NUMBER 
(IZP STN)
MAXIMUM 5 DIGITS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 

NDA-24298 CHAPTER 4
Page 495
Issue 1
AIZPN : Assignment of Internal Zone Paging Data for NDM
AIZPN: Assignment of Internal Zone Paging Data for NDM
1. General
This command is used to assign Internal Zone Paging group data in Fusion Network. The data assigned by this
command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN).
2. Precautions
1. Each Internal Zone Paging group must be composed of 
Dterm station (TEC=12).
2. A maximum of...

CHAPTER 4 NDA-24298
Page 496
Issue 1
AIZPN : Assignment of Internal Zone Paging Data for NDM
4.  Data Sheet
 
NETWORK 
INTERNAL 
ZONE PAGING 
GROUP ID
(NIZPG) 
1-255UGNTELEPHONE NUMBER 
(TELN) 
MAX. 16 DIGITSREMARKS